Metallurgy of Steel / edited by Mihail Ionescu [and three others].

Format:

Book

Contributor:

Ionescu, Mihail, editor.

Language:

English

Subjects (All):

Steel--Metallurgy.

Steel.

Metallurgy.

Microalloying.

Microstructure.

Physical Description:

1 online resource (232 pages)

Edition:

First edition.

Place of Publication:

Baech, Switzerland : Trans Tech Publications Ltd, [2023]

Summary:

Special topic volume with invited peer-reviewed papers only.

Contents:

Intro

Metallurgy of Steel

Preface

Table of Contents

The Application of Physical Simulation in Hot and Cold Rolling of Steels

Development and Application of a Thermal Microstructure Model of Laminar Cooling of an API X70 Microalloyed Steel

Characterization and Separation of Damage Mechanisms of Extruded Case-Hardening Steel AISI 5115 under Cyclic Axial-Torsional Loading

Effect of Mo and Mo+Nb Additions on the Phase Transformation and Microstructure of a Developed Low-Carbon CrNiMnB Ultrahigh-Strength Steels with a Preceding Hot Deformation

Effect of Rapid Induction Tempering on the Mechanical Properties and Microstructure of Ultra-High Strength Steel

Effect of Nitrogen Impurity on the Tensile Ductility and Impact Toughness of Al-Bearing DQP Steels

Microstructural Characteristics and Mechanical Properties of Nanostructured Bainite Processed through High and Low Temperature Ausforming and Isothermal Holding near Ms in a Medium Carbon Steel

Assessment of Mechanical Properties and Microstructure of EUROFER97 Steel after Thermo-Mechanical Treatments

Impact of Ultra-Flash Tempering Treatment on the Microstructure and Mechanical Properties of High-Strength Carbon Steel

Phenomenon-Based Model for Virtual Hot Strip Rolling

Hot Stamping of Heavy-Gaged - Full Development and the Effect of Press Hardening Process on the Microstructure and Mechanical Properties of 22MnB5 + NbMo Alloyed

Grain Refinement in 441 Ferritic Stainless Steel: High Versus Low Ti/Al Ratio after Casting and Hot Rolling

Back-Annealing of Hot Dip Galvanised Strip Steel Microalloyed with Vanadium

Comparative Study of Quench and Partition Processes in High Si and High Al Steels

Thermomechanical Processing of V-N Structural Plate Steels in Low Temperature Austenite.

Influence of Hot Rolling Practice and Furnace Residence Time on the Strength and Toughness of Normalised Nb-Ti-V Structural Steel Plate

Medium Carbon Q&amp

P Steel with High Product of Strength and Elongation

Delamination Fracture in a Medium-Carbon Low-Alloy Steel Subjected to Tempforming

Effects of Pre-Strain and Tempering on Mechanical Properties in High-Strength Martensitic Steels

Effect of Pressure on High-Temperature Oxidation of Ferritic Stainless Steels

Tribological Behaviour of Low Temperature Plasma Assisted Carburized 316 L Steel Produced by L-PBF Technique

Recent Development of Hot-Rolled AHSS for Lightweight Chassis

Effect of Thermomechanical Rolling on Mechanical Properties of TRIP-Aided Steel Sheet

Prediction of TTR Diagrams via Physically Based Creep Simulations of Martensitic 9-12% Cr-Steels

Influence of the Holding Thickness and Process in the Microstructure and Mechanical Properties of a Microalloyed 380 MPa Structural Steel

Application of CALPHAD for the Prediction of Matrix Phase Transformations in Steel

Towards High Strength-Ductility Balance Using Double Annealing Cycles

Quench and Bainite (Q&amp

B) Thermal Cycle as an Alternative to Standard Quench and Partitioning (Q&amp

P) Annealing to Produce AHSS

Importance of through Hardening of Low-Alloy High Performance Martensitic Steels for Large Section Applications

Effects of Substrate Microstructure and Chemical Composition on Liquid Metal Embrittlement in Galvanized 3rd Generation AHSS

Double Soaking of Medium Manganese Steels

On High Performance Steels for Fasteners

Design and Properties of Hot Rolled Tough Carbide Free Bainitic Steels

Low Temperature Hot Press Forming of a Zinc Coated Third Generation Advanced High Strength Steel

Keyword Index

Author Index.

Notes:

Description based on publisher supplied metadata and other sources.

Description based on print version record.

Includes index.

ISBN:

3-0364-1112-7

OCLC:

1412623010