Mechanical Engineering design : selected, peer reviewed papers from the first International Conference on Mechanical Engineering Design 2016 (ICMED 2016), April 25-26, 2016, Chennai, India / edited by Dr. M. Selvaraj, Dr. M. S. Alphin, Dr. M. Nalla Mohamed and Dr. G. Selvakumar.

Format:

Book

Series:

Applied mechanics and materials ; Volume 852.

Applied Mechanics and Materials, 1662-7482 ; Volume 852

Language:

English

Subjects (All):

Machine design--Congresses.

Machine design.

Physical Description:

1 online resource (887 pages) : illustrations.

Edition:

1st ed.

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications, 2016.

Summary:

Selected, peer reviewed papers from the first International Conference on Mechanical Engineering Design 2016 (ICMED 2016), April 25-26, 2016, Chennai, India.

Contents:

Intro

Mechanical Engineering Design

Preface

Table of Contents

Chapter 1: Polymers and Composites

Dynamic Analysis of Banana Fibre Reinforced Hybrid Polymer Matrix Composite Using ANSYS and Optimization of Design Parameters

Analysis of Coir Fiber Reinforced Poly-Lactic Acid (PLA) and Poly-Propylene (PP) Polymeric Composite

Reinforcement of Ethylene Vinyl Acetate with Carbon Black/Silica Hybrid Filler Composites

Effect of Graphene Platelets/Fiber on Plastics Nanocomposites under Low-Velocity Impact Response

Preparation, Properties and Machinability Study of Luffa Fiber - Groundnut Shell Reinforced Epoxy Composite

The Study of the Mechanical Properties of Aramid Fiber Reinforced Epoxy Resin Composite

Mechanical Properties of Almond Shell-Sugarcane Leaves Hybrid Epoxy Polymer Composite

Investigation on the Mechanical Properties of Newly Formulated Hybrid Polymer Composite

Development of Novel Natural Composites with Fly Ash Reinforcements and Investigation of their Tensile Properties

Development of Rubber Nanocomposites for Engineering Application

Numerical Modeling of Energy Absorption Behaviour of Aluminium Foam Cored Sandwich Panels with Different Fibre Reinforced Polymer (FRP) Composite Facesheet Skins

Design and Manufacture of Nanofibers Using Electrospinning Technique for Aerospace Application

Mechanical Properties and Machinability Studies on the Human Hair-Coconut Coir-Glass Fibre Hybrid Composite

Effect of Cooling Medium on Fracture Toughness of Rotomoulded Product

Chapter 2: Research and Development of Metal Matrix Composites

Investigations on Properties of Al-B4C Composites Synthesized through Powder Metallurgy Route

Mathematical Analysis of MWCNT Based Aluminum Alloy Metal Matrix Composite

Ultrasonication Assisted Casting of Bulk Aluminum Metal Nanocomposites.

Surface Reinforcement on Aluminium Matrix by Hybrid Nanocomposites via FSP: A Review

Influence of Steel Shots Size on Tensile Properties of Magnetic Moulded MMC

Mechanical and Micro-Structural Behavior of Lignite Coal Based Fly-Ash and Microsphere Reinforced Al 6061 Metal Matrix Composite

Microstructure and Properties of Hot Extruded Al-TiO2 Powder Metallurgic Composites

Electro Chemical Machining of Aluminum-Boron Carbide-Nanographite Composites

Effect of SiCp Reinforcement on Machinability of A356 Alloy Metal Matrix Composites

Chapter 3: Materials and Materials Processing Technologies in Mechanical Engineering

Optimization and Performance Analysis of Uncoated and Coated Carbide Inserts during Hard Turning AISI D2 Steel Using Hybrid GRA-PCA Technique

Determination of Material Removal Rate and Radial Overcut in Electro Discharge Machining of AISI 304 Using Dimensional Analysis

Effect of Cutting Speed on Thrust Force and Torque in Drilling of Glass Fiber Reinforced Polymer Based on Defects Tolerance

Experimental Investigation and Process Optimization on Shot Peening of Aluminium Alloy (AA6061)

Optimization of Weld Parameters and Weld Bead Dimensions in Welding of 0.3%C-Cr-Mo-V Steel by Gas Tungsten Arc Welding Process

An Approach towards Economized 3D Printing

Effect of Aligning Internal Pores in a Grinding Wheel

Experimental Investigation of Electrochemical Micromachaning Process Parameters on Pure-Titanium Using Taguchi-Grey Relational Analysis

On-Line Monitoring of Drill Wear in Machining of AISI 1040 Steel Using Virtual Instrumentation

A Study on Working Process of Wire-EDM by Using Two Different Dielectric Fluids on HCHCr Alloy Steel

Study of Forming Behaviour of Square Hole Mild Steel Perforated Sheet Metal.

Investigations on Influence of Geometric Parameters in Drawing of Perforated Sheet Metals

Process Parameter Optimization of Laser Forming Based on FEM-RSM-GA Integration Technique

Comparison of PSO, AGA, SA and Memetic Algorithms for Surface Grinding Optimization

Finite Element Modelling of Orthogonal Cryogenic Machining Process

Analysis of the Effect of Process Parameters for Circularity and Cylindricity Errors in Turning Process

Prediction of Heat Generation during Friction Stir Welding of an Aluminium Alloy

Effect and Contribution of Weld Parameters on Peak Temperature during Friction Stir Welding

Experimental Study on Effect of Machining Parameters and Environment on Drilling Characteristics of Stainless Steel 304

Thermal Modeling and Structural Analysis in Wire EDM Process for a 3D Model

Estimation of Aerosol Emission in Die Sinking EDM Process through Numerical Modelling

Parametric Influence of Friction Stir Welding on Cast Al6061/20%SiC/2%MoS2 MMC Mechanical Properties

Finite Element Analysis of the Effect of Cutting Speed on the Orthogonal Turning of A359/SiCp MMC

Experimental Investigation and Finite Element Analysis of Milling of Ti-6Al-4V Titanium Alloy by Studying Cutting Forces and Chip Microstructure

Comparison of the Optimized Process Parameters of Double-Sided Friction Stir Welded Aluminium Alloy Joints Using Statistical and Evolutionary Techniques

Effect of Welding Parameters on Mechanical Properties of Plasma Transferred Arc Welded SS 202 Plates

Grey Relational Analysis and Taguchi Method for the Parametric Optimization of Single Pass Friction Stir Welded Aluminum Alloy 7075-T6 Joints

Experimental Study on Friction Welding of without Backing Block of Commercial Copper Tube without Hole (WoH) to AL 2025 Tube Plate by Using Clearance Fit Method.

Governance of Various Tool Rotational Speeds on Mechanical Properties of Friction Stir Welded AA 7075-T651

The Effect of Sub-Zero Treatment on Mechanical Properties of GTAW Welded AA6082

FWTPET Investigation on SA213 Tube to SA387 Tube Plate

Dissimilar Study on Friction Welding of AA 2025 Tube Plate to Copper Tube Using an External Tool

Experimental Prediction and Numerical Modeling of Ductile Damage and Failure Modeling of Aluminium Sheet Metal Specimen

Tensile Properties and Microstructure of Friction Stir Welded Cast Al-Mg-Sc Aluminum Alloy

Sliding Wear Analysis of a Metallic Coating on ABS Plastic Substrate

Chapter 4: Tribology, Wear Resistance and Surface Engineering

Sliding Wear Behavior of Cryogenic Treated Copper Beryllium Alloy

Application of Artificial Neural Network (ANN) for Predicting the Wear Behaviour of Al 2219-SiCp Composite

A Review on Developing Surface Composites Using Friction Surfacing

Dry Sliding Friction and Wear Behaviour of Reinforced Hybrid Composites of Uniaxial Glass Fiber with Silicon Carbide, Aluminium Oxide and Graphite

A Comparative Study on the Brass-Steel Tribo-Pair under Dry and Lubricated Sliding Conditions

Investigation of Mechanical and Tribological Behaviour of Dual Particles Reinforced Al Matrix Composites

Core Variation in an Externally Pressurized Converging Thrust Bearing with Bingham Lubricant

Experimental Investigation and Optimization of Dry Sliding Wear Parameters on Solid Lubricant Reinforced Bronze Matrix Composites - A Taguchi Approach

Finite Element Analysis of Particle Impact on Substrates Using HVOF Thermal Spray Coating

An Optimization of Erosive Wear on AA 2618 Reinforced with SI3N4, AlN and ZrB2 In Situ Composites

Simulation of Erosion Wear in Slurry Pipe Line Using CFD

Chapter 5: Practice of Engineering Design of Machines and Mechanisms.

Effective Stiffness Behaviour of Sandwich Beams under Uncoupled Bending and Torsion Loadings

Vibration Analysis of Mixed Flow Pump Impeller Blade Designed Using Mean Stream Line Method

A Structural Dynamic Approach to Evaluate Modulus of Elasticity of Cantilever Beam

Design of Reverse Flow Blockage Device for Reactor Coolant Pumps

Prediction of Workpiece Elastic Deformation Using FEM Based Contact Analysis

Design and Analysis of Base Valve of Twin Tube Dampers

Design &amp

Analysis of Steam Drum Based on ASME Boiler and Pressure Vessel Code, Section VIII Div.2 &amp

Div.3

Study on the Use of Boundary Characteristic Orthogonal Polynomials in Determining the Fundamental Frequency of Rectangular Plates with Bidirectional Linear Thickness Variation

Design and Analysis of a Glass Fibre Trolley

Conceptual Design of Innovative Eco-Friendly Windmill

Design and Analysis of Airfoil-Shaped Impeller Blades of Centrifugal Pump

Experimental Setup and Methodology to Carryout Fatigue Testing of Spiral Bevel Gears Used in Differential Gear Box Using NVH Approach

Numerical Investigation of Modified Bach Type Vertical Axis Wind Turbine

A New Proposed Method to Reverse Engineer a Residual Limb for Prosthetic Socket - Procedure, Advantages and Challenges

Design of a Crank Operated Reciprocating Hacksaw

Design and Optimization of Core Balancing Fixture in Vibration Sorting Rig (VSR)

New Mechanism to Improve the Competence of Power Generation

An Efficient Method to Generate Element Stiffness Matrix of Quadrilateral Elements in Closed Form on Application of Vehicle Analysis

Estimation of Spring-Back of Single Torus Inner Vessel Sector by Finite Element Analysis

Identification of Stable Configurations between Constituent Parts of an Assembly

Dynamic Analysis of Faulty Rotors through Signal Processing.

Feasibility of Using Wind Mill for Saw Milling.

Notes:

Includes bibliographical references at the end of each chapters and indexes.

Description based on online resource; title from PDF title page (ebrary, viewed June 21, 2017).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0268-3

OCLC:

959038865