Proceedings of International Conference on Material Science and Engineering 2016 : selected, peer reviewed papers from the International Conference on Material Science and Engineering (ICMSE 2016), June 24-26, 2016, Guangzhou, China / edited by Mohamed F. Eldessouki, Sung Whan Kim and Sheng Li Wei.

Format:

Book

Contributor:

Eldessouki, Mohamed F., editor.

Kim, Sung Whan, editor.

Wei, Sheng Li, editor.

Series:

Key engineering materials ; Volume 723.

Key Engineering Materials, 1662-9795 ; Volume 723

Language:

English

Subjects (All):

Materials science.

Physical Description:

1 online resource (867 pages).

Edition:

1st ed.

Place of Publication:

Switzerland : Trans Tech Publications Ltd, 2017.

Summary:

Selected, peer reviewed papers from the International Conference on Material Science and Engineering (ICMSE 2016), June 24-26, 2016, Guangzhou, China.

Contents:

Intro

Proceedings of International Conference on Material Science and Engineering 2016

Preface, Committees

Table of Contents

Chapter 1: Metals, Alloys and Composite Materials

Influence of Heat Treatment Method on Grain-Refining during Warm Deformation of Medium Carbon Steel

Study of Temperature Field in PECM Based on Multi-Physics Coupling Simulation about Titanium Alloys Blades

A Mesoscopic Mechanics Research on Deformation of 7B04 High Strength Aluminum Alloy

Superplastic Elongation through Deformation Mechanism Transition during High-Temperature Deformation in Thermally Unstable Fine-Grained Aluminum Solid Solution Alloy

The Natural Aging Effect on the Activation Energy of the Precipitation Processes in the Al-Mg-Si Alloy

Principles of Optimal Control in the Synthesis of Composite Materials

Annealing Effect for Cold Rolling 6016 Aluminum Alloy Sheet

The Effect of Lack-of-Fusion Porosity on Fatigue Behavior of Additive Manufactured Titanium Alloy

Experimental Study on Electro-Discharge Machining of Nickel-Based Superalloy

The Effect of Modifying Agents on the Mechanical Properties of Straw Flour/Waste Plastic Composite Materials

Simulation on Temperature Field of Friction Stir Welding of 2A14 Aluminum Alloy Based on Equivalent Film Method

Toughening Mechanism and Mechanical Properties Simulation of Rubber-Toughened Polymers

The Influence of Different Wood Aggregates on the Properties of Geopolymer Composites

Magnetic and Electrical Properties of Iron-Based Soft Magnetic Composites with Silicone Resin Insulation Coating

Fracture Model of ZrO2-Al2O3 Ceramic Composite

Study on Equivalent Viscous Damping of Aeolian Vibration for Transmission Line by AACSR-400 Steel Core Aluminum Alloy Wire

Chapter 2: Materials Testing, Forming and Processing Technology.

Positive Effects of High-Temperature Steel Creep Behavior on Continuous Casting Slab

Obtaining and Maintaining of Clean High Vacuum on the Material Outgassing Test System

Study on the Mechanical Property of 20Cr13 Stainless Steel Barrel Processed by Cold Radial Forging

A Brief Discussion about Nickel Aluminum Bronze Propeller Failure Modes and its Repair Methods

Neutron Spectrometer Used for Nondestructive Detection of Materials Deep Stress: Status of the Project

Research on Torsion Beam with High Strength Steel Materials Forming

Method Studied on the Tensile and Compression Strength Prediction of Friction Stir Welding Aircraft Panel

Friction Stir Forming of A5083 Aluminum Alloy Gear-Racks with WC Particles Embedded in Tooth Surface

Measurement of Complex Permittivity of Materials Using a Double-Ridge Waveguide Resonator

The Deduction of Double-Layer Material's Dielectric Constant in High Q Cavity

Material Testing Based on Cylindrical Cavity

Materials Machining Study of Titanium Alloy Using a High Speed Camera

Study on Electro-Discharge Machining Technology of Superalloy Impeller

A Potential Application of the Mechanical Tensile Strength Test for Indicating Paper Biodegradation

Research and Manufacture of Microwave Material Automatic Measurement System of Slotted Line

Laser High-Speed Impact Composite Forming of Aluminum/Aluminum

Experimental Study on Damage Effect of PELE with New Structure and Composite Material against Multi-Layered Plates

Size Effects on Formability of Copper Foil in Flexible Micro-Bending Process

An Optimization Model on Cutting Parameters of Material Processing for High Productivity

The Friction and Wear Characteristic Comparison of PMMA and MC Nylon as Spreading Device Pad Material in Copper Coil Forming.

Attenuation Distribution Broadband Measurement System of Ceramic Pole Attenuator Used for TWT

Evaluation on the Corrosion and Wear Resistance of Welding Zone Welded with Plasma Transferred Arc Welding Method

An Identification Method of Failure Mechanism Consistency for Rubber Materials in Accelerated Aging Testing

Change in Surface Morphology of Si (100) Wafer after Oxidation with Atmospheric-Pressure Plasma

Microstructural Characterization of Thermal Barrier Coatings Glazed by a High Power Laser

Hot Deformation Characterization of Mg-Sm-Zn-Zr Alloy Using Artificial Neural Network and 3D Processing Map

Study on Microstructure and Mechanical Properties of Explosive Welding Composite Plate

New Method for Diamond-Like Carbon Deposition on Ceramic Cutting Tools in Vacuum-Arc Plasma

Monitoring and Material Simulation of Automatic-Cooling System for Waterfowl Incubator

Chapter 3: Engineering Materials and Application

The Progress of Advanced Engineering Materials in Acupuncture Needle

Study of Nickel Wick Structure Applied to Loop Heat Pipe with Flat Evaporator

Fracture Analysis of an Aluminum Alloy Gear Pump Housing

Lightweight Research on Aluminum Alloy Material of Rear Axle Differential

Effects of Metal Material Stent Design Parameters on Longitudinal Stent Strength

Design and Numerical Analysis of Leaf Spring Using Composite Materials

The Influence of Arterial Wall Thickness on Stainless Steel Material Stent Expansion in Tapered Arteries

Micro-Strength Analysis of Sand Mold for Casting Based on Bonded-Particle Model

Modeling and Optimization for Lightweight Design of Aluminum Alloy Wheel Hub

Milling of Dielectric Ceramics by Fast Argon Atoms

Optimal Design of Multi-Layer Absorbent Honeycomb Cellular Composite Material Structure.

The Low Temperature Liquefaction Characteristic Test of Sulfur Hexafluoride Gas Used in Electrical Equipment

Fracture and Failure Mechanism Analysis of the 45CrNiMoVA Gear

Chapter 4: Behavior and Mechanical Properties of Materials

Effect of in Addition to Zn-5Al Solder on Microstructure and Properties of Solder Joints

The Relationship between the Deformation of Spherical Indentation and Tensile Deformation

Influence of Materials Hardenability Parameters on the Machine Parts Characteristics after Unloading

Shear Bond Strength of Orthodontic Bonding Materials Polymerized by High-Intensity LEDs at Different Intensities and Curing Times

Granular Material (of Commeasurable and Multi-Dimensional Granules) Properties

Analysis of the Properties of Mechanical Materials and Parts Based on ANSYS Software

Stress Intensity Factor of Interface Crack in the Cermet Cladding Material Structure under Steady Mechanical-Thermal Coupled Loads

Zone Partitioning Sequential Calculation Method for Three-Dimensional Phase-Field Material Simulation during Directional Solidification

Investigation on Process and Welded Joint Mechanical Properties of Bainitic Steel Rail Flash Butt Welding

Chapter 5: Nano-, Micro- and Film Materials

The Fabrication of MgB2 Film and Nano-Bridge by EB and FIB

Experimental Verification of Scrub and Impact Resistance of the Epoxy Coatings Filled with the Finely Milled Waste Glass

Extraction of Cellulose Microfibrils from Cassava Pulp

Forming Mechanism of α-Fe2O3 in the Oxide Films on Iron-Bonded Diamond Wheel Surface by ELID Grinding

Resistive Switching in NiO/BiFeO3 Thin Film

Synthesis of Porous Basic Magnesium Carbonate Crystallographic Materials with Flower-Like Structure.

Study on Thermal-Shock-Resistance of the Composite Coating of 20 Steel Substrate by Hot Dip Aluminum and Micro-Arc Oxidation

Influence of Cathode Size on Field Emission Properties of a Single Vertical Carbon Nanotube Material

Structural Modification of Polymer Nanocomposites Based on Tetrazole

Influence of Doping Element Crystal Structure on the Microstructure of Cr Films by Magnetron Sputtering

TEM and XRD Analysis of Carbon Nanotubes Synthesised from Flame

Stress Reduction of Solar Cell with Nanostructures on Silicon Chip Surface

Preparation and Characterization of Silicone Oil/UF Resin Microcapsules as Erosion Inhibitor

Improved Out-Coupling Emission of Organic Light-Emitting Diodes by Employing Ag-Thin-Film or Al2O3-Thin-Film Longitudinal Wave Guides

Synthesis and Characterization of Silica Aerogel Materials Doped with TiO2 Powder for Thermal Insulation

Hardware-Technological Features of Layered Surface Composition Made of Shape Memory Materials in a Single Vacuum Cycle

Numerical Simulation Study of Quasi-Static Loading and Dynamic Loading for Micro Bending Forming of Copper Foil

Microwave Absorbing Characteristics of Plasma Sprayed SiC-CNTs/AT13 Absorbing Coating

Effect of Coating Removal by Induction Heating on the Microstructure and Properties of Deck Steel

Optical Properties of Ge23.5Pb20S56.5 Glassy System

Chapter 6: Chemical Materials and Chemical Technologies

The Effect of Ammonium Sulfate on the Sulphate Reducing Bacteria Bio-Derived Material

Chromium (VI) Adsorption Study Using Bio-Adsorbent Material Derived from Tamarind-Seed Testa

Separation of Non-Natural Carboxyl Amino Acid Enantiomers by Capillary Electrophoresis with CM-β-Cyclodextrins as Chiral Selective Reagent

Effect of K2O Contents on the Releasing of Nutrient Ions from Phosphate Glass System.

Biodiesel Production from Used Vegetable Oil Using Ethanol and Sodium Methoxide Catalyst.

Notes:

Includes bibliographical references at the end of each chapters and index.

Description based on online resource; title from PDF title page (ebrary, viewed June 20, 2017).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0257-8

OCLC:

988865932