The 15th International Conference on Aluminium Alloys : selected, peer reviewed papers from the 15th International Conference on Aluminium Alloys (ICAA15), June 12-16, 2016, Chongqing, China / edited by Qing Liu [and four others].

Format:

Book

Contributor:

Liu, Qing, editor.

Series:

Materials science forum ; Volume 877.

Materials Science Forum, 1662-9752 ; Volume 877

Language:

English

Subjects (All):

Aluminum alloys--Congresses.

Aluminum alloys.

Physical Description:

1 online resource (705 pages) : illustrations.

Edition:

1st ed.

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications, 2017.

Summary:

Selected, peer reviewed papers from the 15th International Conference on Aluminium Alloys (ICAA15), June 12-16, 2016, Chongqing, China.

Contents:

Intro

The 15th International Conference on Aluminium Alloys

Preface, Committees, Sponsors

Table of Contents

Chapter 1: Casting and Solidification

Fabrication of Cladding Billet in Diameter of 160mm/148mm by Direct Chill Casting Process

Microstructural and Mechanical Characteristics of Cladding Billets with Different Clad Ratios

Effect of Direct Chill Casting Speed and Heat Treatment on Microstructure and Mechanical Properties of Al-13.9%Mg2Si Composite

Effect of Cooling Rate on Modification and Grain Refinement of 4032 Aluminum Alloy

Effect of Compound Modification and Cooling Rate on Microstructure and Mechanical Properties of Al-25%Si Alloy

Thermodynamics Calculation of Extra Mn Addition in the Recycling of Al-Si-Cu Aluminium Alloys

Microstructure and Mechanical Properties of Semi-Solid Die-Cast A356 Aluminum Alloy

6000 Series Aluminium Alloy Strip Casting Using a Vertical Type Twin Roll Caster

Microstructural Evolution of Al-Mn Based Alloy Fabricated by Vertical-Type High-Speed Twin-Roll Casting

Application of Vertical-Type High-Speed Twin-Roll Casting for Up-Grade Recycling and Clad Sheets Fabrication of Aluminum Alloys

Study on Thermal Physical Properties of Al-Si8-Cu2-Mg Alloy

Improving the Corrosion Resistance of Hot-Working Mold Steel against Al Alloy Melt by Coating

Supersaturation Behavior of Al Solid Solutions and its Effect on Tensile Property in Al-7Si-xMg Alloys during Solution Heat Treatment (x: 0.4 and 0.8 Mass%)

Evaluation on the Accuracies of Sump Depth Measurements during DC Casting Process of 7050 Alloy

Effect of Electromagnetic Field on the Macrosegregation Behaviour of Al-Cu Alloy Ingot Prepared with Direct-Chill Casting Process

Tensile Deformation Behavior of Al-Cu 206 Cast Alloys near the Solidus Temperature.

Study on Eutectic Microstructure and Modification Mechanism of Al-Si Alloys

Grain Refinement in an Al-Zn-Mg-Cu Casting Ingot

Effects of Si Addition on the Microstructure and Tensile Property of Al-xMg Alloys with Al2Ca during Heat Treatment (x: 5 and 7 Mass%)

Research of Preparing Parameters in the Complex Process on Microstructure in Semisolid A356 Alloy Slurry with Micro-Addition of La

Effects of Ti Powder Additions in Melt-SHS Process on the Performance of Al-Ti-B Grain Refiner Alloys

Influence of Die Casting Temperature and T1 Treatment on the Microstructure and Properties of the Alsicumg Alloy

Investigation of Phosphorus-Containing Compounds in Aluminium Alloys with Emphasis on the Formation Mechanism

Chapter 2: Phase Transformations

Effects of Si Content on the Tensile Strength and Machinability of Al-Mg-Si-Cu-Mn-Cr Alloys

Detection of Quench Induced Precipitation in Al Alloys by Dilatometry

Effects of Homogenization Treatment on Dispersoid Characteristics and Recrystallization Behavior in an Al-Zn-Mg-Cu-Zr Alloy

Stress Induced Precipitation during Quenching of Aluminium Alloys

The Effects of Ni Content and Intermediate Annealing Condition on Recrystallization of Al-Fe-Ni-Si Alloy Fin Stocks

Effects of Mn and Cr Additions on the Recrystallization Behavior of Al-Mg-Si-Cu Alloys

Role of Pre-Deformation on Aging Precipitation Behavior of Al-Cu-Li Alloys

The Effect of Cryorolling on the Microstructure of Al-Cu-Mg Alloy

Influence of Wiper Height on 7A55 Slabs

Quantitative Measurement of Strain Field around η' Phase in a 7000 Series Aluminum Alloy

The Influence of Extended and Variable Pre-Stretching on the Strength of AA2195 Alloy Taper-Rolled Plates

New Progress on Er-Containing Micro-Alloying Aluminum Alloys.

Recent Advances in Research and Industrial Technologies for Aluminum Alloys in Japan

Apparent Morphology and Structure of Iron-Rich Phase in Aluminum Alloy

A Combined TEM and Atom Probe Approach to Analyse the Early Stages of Age Hardening in AA 6016

Effect of the Deformation Parameters on the Microstructure of TiC-Al2O3P/Al Composites

APT Investigation of Effect of Minor Zr on Precipitation Strength of Al-Sc Alloy

Abnormal Effects of Temperature and Strain Rate on the Ductility of a Carbon Nanotubes Reinforced Al Alloy Composite

Quantitative Phase Analysis of Aluminium-Lithium Alloys

Effect of Annealing Conditions on Recrystallization of AA5182 Sheet

Chapter 3: Thermo-Mechanical Processing

Effect of Novel Thermomechanical Treatment on Microstructure and Properties of 6156 Alloy

Effects of Mn and Zr Addition in 6000 Series Aluminum Alloys on the Formation of Stabilized Substructures during Hot Deformation

Phase Composition, Texture and Mechanical Properties of 80 mm Plates of Al-2.8Cu-1.7Li-0.5Mg-0.5Zn-0.1Zr-0.06Sc Alloy

Effects of Homogenization Conditions on the Microstructures of Twin-Roll Cast Foil Stock of AA8021 Aluminum Alloy

Effect of Solution Treatment on the Properties and Microstructural Evolution of Al-Zn-Mg-Cu-Er-Zr Alloy

Combined Effect of Cold-Rolling and Aging on Precipitation and Recrystallization Behavior of Al-Er-Zr Alloy

Effect of Natural Aging of 6xxx Series Extrusions on the Energy Absorbance Capacity

The Effect of Heating Rate on the Density and Spatial Distribution of Dispersoids during Homogenisation of 6xxx Aluminium Alloys

Grain Growth Behavior of AlMg5 Alloy Fabricated by Using a New Mg Mother Alloy Containing Al2Ca during Homogenization and Hot Compression

Effects of Mg and Mn Contents on Hot-Rolling Temperature and Resultant Tensile Properties of Al-Mg-Mn Alloys.

Study of Hot Deformation Behavior of 6082 Aluminum Alloy

Study on the Ageing Process of the 6xxx Series Aluminum Alloy Wires for Overhead Conductors

Study of Texture in 6016 Aluminum Alloy during Processing

Chapter 4: Metal Plasticity and Forming

Friction-Stir Welding of Zr-Modified AA5083 Sheets in Different Conditions

Effect of Forging Temperature on Deformability and Structure Evolution of High Purity Aluminium during Multi-Directional Forging Process

A Study on the Deformation Dehaviours of Al-1.4Fe-0.2Mn Alloy Sheets

Micro Structural Changes in Welded AlCuLi-Alloys by Positron Annihilation Spectroscopy, SAXS and DSC

Study on the Formability of Aluminium Alloy Sheets at Room and Elevated Temperatures

Precipitation Behaviour and Mechanical Properties during Short-Term Heat Treatment for Tailor Heat Treated Profiles (THTP) of Aluminium Alloy 6060 T4

Chapter 5: Strength, Fracture and Fatigue

Effect of Dispersoids on Long-Term Stable Electrical Aluminium Connections

Correlation between Fracture Toughness and Quantitative Characterization of Microstructure in 7055 Aluminium Alloy

Effect of Microstructure on Impact Energy of an Al-Mg-Sc Alloy

Quantification of Fatigue Weaklinks in High Strength Al Alloys

Chapter 6: Advanced Atomic-Scale Characterization

Microstructure and Mechanical Properties of 6013 Aluminium Alloy Processed by a Combination of ECAP and Preaging Treatment

Characterization of Intergranular Corrosion Defects in a 2024 T351 Aluminium Alloy

Partial Melting, Segregation Behavior and Nanomechanical Properties of AlCu2Si1Mg0.6 Alloy

Effects of Sn Addition on Clustering and Age-Hardening Behavior in a Pre-Aged Al-Mg-Si Alloy

Directionality and Column Arrangement Principles of Precipitates in Al-Mg-Si-(Cu) and Al-Mg-Cu Linked to Line Defect in Al.

The Study of Ingots and Deformed Semi-Finished Products of Al-Mg-Sc and Al-Cu-Li Alloys Using Diffraction Methods

Chapter 7: Corrosion and Surface Properties

Characterization of Roping on AA6xxx Alloy Sheet by Numerical Analysis for Surface Topography

Corrosion of Aluminium Aerospace Alloys

Intergranular Corrosion Mechanism of Brazed Al-Mn-Cu-Si Alloy

Optimization for Anodizing Conditions of 5A06 Aluminum Alloy Based on Doehlert Design Matrix Method

Response of Microstructure in High Strength Aluminium Alloy to Graff Sargent Etchant

The Effect of Mg Content on Intergranular Corrosion of Al-Mg-Mn Alloys after Annealing

About the Role of Hydrogen in Stress Corrosion Cracking of a 7xxx Aluminium Alloy (Al-Zn-Mg)

Corrosion Characteristics of Al-B4C Metal Matrix Composites in Boric Acid Solution

Computational Simulation of Localised Corrosion in Anodised AA 2099-T8 Aluminium-Lithium Alloy

Effect of Heat Treatments on Stress Corrosion Behavior of 7050 Al Alloys in 3.5% NaCl Solution

Refinement of Primary Silicon Crystals by Novel P-Doped γ-Al2O3 Particles in Solidification of Hypereutectic Al-Si Alloys

Chapter 8: Novel Processes and Alloy Design

Similar and Dissimilar Ultrasonic Spot Welding of 5754 Aluminum Alloy for Automotive Applications

Study of an Accelerated Aging Process for Conductive Aluminum Alloys

Processing Map and Microstructural Evolution of Isothermal Compressed an Al-Mg-Si-Cu-Zn Alloy

Precipitation of ScAl3 Phase during Solutionizing and Ageing of Hypoeutectic Al-Sc Alloys and its Impact to Mechanical Properties

Effect of Homogenizing Treatment on Microstructure and Property of Al-Zn-Mg-Cu-Zr Aluminum Alloy

Effect of Zn, Mg, Cu, Zr on Microstructure and Properties of Laser Welding Aluminium Alloy

Development of TiB2 Dispersed Aluminum Composites by Spark Plasma Sintering.

Effect of Solution Treatment on Microstructure and Mechanical Properties in an Al-9.3Zn-2.0Mg-1.8Cu Alloy.

Notes:

Includes bibliographical references and index.

Description based on online resource; title from PDF title page (ebrary, viewed June 21, 2017).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3050-4

OCLC:

962839784