THERMEC 2016 : selected, peer reviewed papers from the 9th International Conference on Processing & Manufacturing of Advanced Materials : May 29-June 03, 2016, Graz, Austria / edited by C. Sommitsch [and four others].

Format:

Book

Contributor:

Sommitsch, C., editor.

Series:

Materials Science Forum Series

Materials Science Forum Series ; v.Volume 879

Language:

English

Subjects (All):

Materials--Congresses.

Materials.

Composite materials--Congresses.

Composite materials.

Physical Description:

1 online resource (2,634 pages)

Edition:

1st ed.

Place of Publication:

Zürich, Switzerland : Trans Tech Publications Ltd., [2017]

Summary:

Selected peer reviewed papers from the 9th International Conference on Processing & Manufacturing of Advanced Materials, May 29 - June 03, 2016, Graz, Austria.

Contents:

Intro

THERMEC 2016

Preface, Committees, Sponsors

Table of Contents

Chapter 1: Keynote Papers

Fatigue Life Extension by Crack Repair Using Double Stop-Hole Technique

Intermetallic Phases in New Steels

An Artistic Approach to Thermal Spray

Dynamic Transformation during Plate and Strip Rolling

The Role of Microstructure in Creep Strength of 9-12%Cr Steels

Micro-Mechanical Responses of Ultrafine-Grained Materials Processed through High-Pressure Torsion

The Development of Superplasticity and Deformation Mechanism Maps in an Ultrafine-Grained Magnesium Alloy

Revision of ISO 27306 for CTOD Toughness Correction for Constraint Loss

Development of Polymer-Based Composite Coatings for the Gas Exploration Industry: Polyoxometalate Doped Conducting Polymer Based Self-Healing Pigment for Polymer Coatings

Anelastic Phenomena Preceding the Melting of Pure Metals and Alloys

Combined Effects of Grain Boundary Convection and Migration in Dynamic Phase Transformations

Complex Cell Physiology on Topographically and Chemically Designed Material Surfaces

Metallurgical Aspects Affecting Thermomechanical Processing of Ti Based Microalloyed Steels

Thermomechanical Processing of Medium Manganese Steels

Diamond Based Schottky Photodiode for Radiation Therapy In Vivo Dosimetry

Thermo-Mechanical Training of Stainless Steels to Improve Damping Capacity

Development of High-Temperature Shape Memory Alloys above 673 K

Advanced Intermetallic TiAl Alloys

Development and Research of Low-Cost Titanium Alloys, Especially Case of Japan

Enhancement of Mechanical Biocompatibility of Titanium Alloys by Deformation-Induced Transformation

Chapter 2: Contributed Papers

Magnetic Shape Memory - Polymer Hybrids

Hardness Homogeneity in an AZ80 Magnesium Alloy Processed by High-Pressure Torsion.

Microstructure Evolution and Deformation Mechanisms of Harmonic Structure Designed Materials

A Comparative Study of Molecular Motion Cooperativity in Polymeric and Metallic Glass-Forming Liquids

Damage Initiation in Dual-Phase Steels: Influence of Crystallographic and Morphological Parameters

Microstructure and Friction Behavior of AISI 52100 and D2 Steels Subjected to Ultrasonic Nanocrystalline Surface Modification (UNSM) Technique at a High Temperature

Microstructure Study of Nickel-Based Superalloys after Deep Cold Rolling

IN792 DS Superalloy: Optimization of EB Welding and Post-Welding Heat Treatments

Mathematical Model of Microstructural Evolution of Hot Rolled Wire Rods for Nb Microalloyed Steels

A Study on the Microstructural Characterization of René 142 Deposited Atop René 125 Processed through Scanning Laser Epitaxy

Correlations between Defect Content, Mechanical Properties and Fractographic Investigation of AlSi9Cu3(Fe) Alloy Reference Castings

Influence of Thermal History on the Hot Ductility of Ti-Nb Microalloyed Steels

Innovative Experimental Approaches and Physical Measurement Methods for Fatigue Monitoring and Life Assessment

Novel Concepts for the Application of Magnesium Sheets and Profiles in Crash Loaded Vehicle Areas

Influence of Microalloying Elements Ti and Nb on Recrystallization during Annealing of Advanced High-Strength Steels

Regularities of Microstructure Evolution and Strengthening Mechanisms of Austenitic Stainless Steels Subjected to Large Strain Cold Working

Effect of Temperature and Strain Rate on the Mechanical Properties of 99.5 Aluminium Rods Extruded by KOBO

Miniaturized Flow-Through Bioreactor for Processing and Testing in Pharmacology

Microretina: An "Open Source" Tool for Retinal Images Analysis.

Phase Stability Study of the Shape Memory Alloy CuAl-X (X: Be, Zn, Ti, Ni, Ag and Au) by Ab Initio Calculations

Phase Constitution and Martensitic Transformation Behavior of Au-51Ti-18Co Biomedical Shape Memory Alloy Heat-Treated at 1173K to 1373K

Thermal Plasticity Index of Nanostructured N-Based Coatings on HSS 6-5-2 (1.3343) Tool Steel

Microstructural Investigation of Oxynitrocarburized Components Processed at Different Temperatures

Numerical Simulation of the Effects of Preheating on Electron Beam Additive Manufactured Ti-6Al-4V Build Plate

Development of Al-Mg-Si-(Cu) Alloys for Automotive Body Panels and the Related Ageing Behaviours

Optimal Deformation Hardening in Lead Base Anodes for Copper Electrowinning for an Appropiate Working Life

Gold Recovery from PCBs with Thiosulfate as Complexing Agent

Friction Stir Processing at High Rotation Rates of a Magnesium Alloy: Mechanical Properties at High Temperatures and Microstructure

Fracture Surface Characterisation of Friction Stir Processed Magnesium Alloy after Mechanical Tests

Influence of Dynamic Strain Ageing and Long Term Ageing on Deformation and Fracture Behaviors of Alloy 617

Development and Industrial Applying on Rolling Mill 5000 of the Model of Austenite Grain Size Evolution in Nb-Microalloyed Steels

Effects of Precipitated Particles on Microstructure Evolution during Thermo-Mechanical Processing of Al-Zn-Mg-Cu Alloy

Analysis of Deformation and Internal Defect in Flat-Wedge Cross-Wedge Rolling of GH4169 Superalloy

Effects of Laser Power on Track Profile and Structure Formation during Selective Laser Melting of CoCrMo Alloy

The Observation of Austenite to Ferrite Martensitic Transformation in an Fe-Mn-Al Austenitic Steel after Cooling from High Temperature

Mechanical Analyses of Welding in Practical Field.

Mechanical Properties of Fine-Grained and Ultrafine-Grained Ti-6Al-4V with Equiaxed and Bimodal Microstructures

The Effect of Final Annealing Heating Rate on Abnormal Grain Growth in a Fe-3.5%Si Steel

In Situ Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA Steels

Tensile Stress Analyses through Digital Image Correlation of Single Lap Joints of High Strength Steel and Aluminum Alloy Using Adhesive Bonding

Analysis of Pre-Strain in a Hybrid Forming Process Including Stretch and Incremental Sheet Forming

Fatigue Crack Growth in Flow Formed INCONEL 718

Modeling the Microstructural and Yield Strength Evolution of an Age-Hardenable Al Alloy for High Temperature Applications

Materials Research at University of Nevada, Las Vegas

Laser-Induced Surface Texturing of Metal or Organic Substrates for Structural Adhesive Bonding

Nanooxides Derived from Hydrotalcites as Catalysts for Dry Methane Reforming Reaction - Effect of [Ni(EDTA)]2- Adsorption Time

Comparative Study of Optimization in Pultrusion with Pre-Heating and Die-Cooler Temperature for Improved Cure

Dynamic Piezoelectric Behavior of Lithium Niobate at High Temperature

Relationship between the Yield Strength-Fracture Toughness Balance and the Multiscale Microstructure of a Maraging Stainless Steel for Aircraft Applications

Photonic Application of Diatom Frustules

Correlation between Aging Effects and High Temperature Mechanical Properties of the Unmodified A356 Foundry Aluminium Alloy

Manganese Effect on Q&amp

P CMnSi Steels

Microstructural Evolution and Mechanical Behavior of Low Density Fe-Mn-Al-C Steels with High Stacking Fault Energy

Nanocomposites Consisting of Carbon Nanotubes and Nanoparticles of Noble Metals.

Mechanical Behaviour of Materials during Creep with Changing Loads

Microstructure and Texture Evolution in Nickel during Accumulative Roll Bonding

An Experimental Investigation of the Size Effects in Forming Processes of High-Purity Thin Metallic Sheets

The Microstructural Criterion for Creep Strength Breakdown in a 10%Cr Martensitic Steel

SPD Processed Materials Mechanical Properties Determination with the Use of Miniature Specimens

Machinability of an Experimental Graphitised Carbon Steel

Effect of Microalloying Elements on Phase Transformation, Microstructure and Mechanical Properties in Dual-Phase Steels

Development of Armor High Strength Steel (HSS) Martensitic Plates for Troops Carriers

Physical Simulation of Thermo-Mechanical Processing of Ferritic-Bainitic Dual Phase (FBDP) Steel

Evolution of Microstructure, Phase Composition and Hardness in 316L Stainless Steel Processed by High-Pressure Torsion

Influence of Cross Section on the Parameters for Linear Friction Welding of High-Strength Chains

Determination of Crystallographic Orientation near a Chill Zone Using Ghost Lines

Crystal Structure and Microstructure of Martensite in Ni-Mn-In Alloys and the Behavior of Variant Rearrangement under Uniaxial Loading

Accelerated Aging and Portevin-Le Chatelier Effect in AA 2024

Microstructure and Mechanical Properties of Mg-6Zn-1.4Y Alloy Produced by Rheo-Squeeze Casting Process

The Interface Character Distribution and Intergrannular Corrosion Resistance of Duplex Stainless Steel UNS S32304

The Role of the Nd/Zn Ratio on the Stability of Mg-Zn-Nd Clusters and the Evolution of Texture in Two Mg-Zn-Nd Alloys during Annealing

Microstructural Evolution in a 9%Cr-3%Co-3%W-VNb Steel during Creep.

Integrated Defect Classification in Manufacturing of Carbon Fibre Reinforced Thermoplastic Polymer Matrix Composites.

Notes:

Includes index.

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3129-2

OCLC:

1089529955