Development and investigation of materials using modern techniques II : selected, peer-reviewed papers from the 3rd international conference on advanced materials characterization techniques (AMCT 2019), july 23-24, 2019, Kangar, Malaysia / Ruhiyuddin Mohd Zaki [and twelve others].

Format:

Book

Contributor:

Ruhiyuddin Mohd Zaki, editor.

Series:

Materials Science Forum Series

Materials Science Forum Series ; v.Volume 1010

Language:

English

Subjects (All):

Materials--Congresses.

Materials.

Materials science--Congresses.

Materials science.

Physical Description:

1 online resource (697 pages) : illustrations

Edition:

1st ed.

Place of Publication:

Baech, Switzerland : Scientific.Net, [2020]

Summary:

Selected peer-reviewed full text papers from the 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019)Selected, peer-reviewed papers from the 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), July 23-24, 2019, Kangar, Malaysia.

Contents:

Intro

Development and Investigation of Materials Using Modern Techniques II

Preface

Table of Contents

Chapter 1: Steel, Alloys and Intermetallic Compounds

Crystallization Kinetics and Fragility of Al-Based Amorphous Alloy

Effect of Heat Treatment on Isothermal Oxidation of Fe-33Ni-18Cr Alloy at 1000°C

Effect of Plasma Flow in Plasma MIG Welding Process to the Microstructure Refinement at Heat Affected Zone of As-Welded Carbon Steel

Effect of Solution Treatment Temperature on the Microstructure of Fe-33Ni-19Cr Alloy

Heat Treatment of SS 316L for Automotive Applications

Influence of Cobalt Addition on Microstructure and Damping Properties of Cu-Al-Ni Shape Memory Alloys

Internal Oxidation Behavior of Fe-33Ni-19Cr Alloy

Isothermal Oxidation Behavior of Fe-33Ni-18Cr Alloy in Different Heat Treatment Temperature

Linking Spectrograph to Mechanical and Physical Properties of X7475 Experimental Alloys Produced from Recycling Beverage Cans for Bumper Beam Applications

Oxidation Kinetics of Fe-Ni-Cr Alloy at 900 °C

Performance of Fe-33Ni-18Cr Alloy at High Temperature Oxidation

Residual Properties of the Drawn Steel Wires for Damage-Based Fretting Fatigue Models of the Wire Ropes

Role of Alloyed Niobium on the Isothermal Oxidation of Fe-40Ni-24Cr Alloy

Study of Heat Treatment Effect in MnCoGe Compound on Stucture and Electric Properties

Temperature Effect on Pseudomonas Aeruginosa Growth and Its Presence on Corrosion of Steel Wire Rope

The Effect of Al Micro-Alloying on Corrosion and Thermal Properties of Sn-Zn Alloy

The Preliminary Study of the Addition Zinc in Tin-Copper Lead Free Solder

Chapter 2: Polymers and Composites

Enhancement of Electrical Conductivity of Electrospun Polyacrylonitrile Fibres Using Carbon Nanomaterials Synthesised from Polypropylene Waste.

Incorporation of Hybrid Pre-Dispersed Organo-Montmorillonite/ Destabilized Bentonite Nanofillers for Improving Tensile Strength of PEVA Copolymer with 40% Vinyl Acetate Composition

Mechanical and Thermal Properties of Hybrid Non-Woven Kenaf Fibre Mat-Graphene Nanoplatelets reinforced Polypropylene Composites

Mechanical Properties of Recycled Polypropylene Filled with Aluminium Hydroxide

Properties of Carbon Nanotubes-Calcium Carbonate Hybrid Filled Epoxy Composites

Synthesis and Characterization of IPDI Based Shape Memory Polyurethane

The Effect of CuZnFe2O4 on Mechanical Properties and Thermal Conductivity of ABS Manufactured Using 3D Printer

The Effect of Various Nanoclay Surface Modifications on the Thermal and Mechanical Properties of Amorphous Polyamide Nanocomposites

Comparison between CNT Thermal Interface Materials with Graphene Thermal Interface Material in Term of Thermal Conductivity

The Simultaneous Effect of Extrusion Ratio and Solution Heat Treatment on the Microstructure and Tensile Properties of Extruded Al-15%Mg2Si- 1.0%Gd Composite

Compatibility of Palm Biodiesel Blends on the Existing Elastomer Fuel Hose in Diesel Engine with Approach of Dynamic Test Rig: A Concept Study

Chapter 3: Ceramics

Comparative Study on the Performance of ZTA Cutting Tool with the Addition of Different Particle Size of MgO Additive

Comparison between Solid State Reaction and Coprecipitation Method of Titanium Oxide Addition on the YBa2Cu3Oδ Ceramics

Effect of Alumina (Al2O3) to the Properties of Whiteware Porcelain

Effect of Milling Parameters on the Structural, Microstructural and Physical Properties of Alumina-Titania-Graphite Nanocomposite

Effect of Sintering Temperature on Properties of Setiu Clay Sediments.

Effect of Sintering Temperature on the Preparation and Characterization of Green Glass Ceramic from Rice Husk Ash as a Matrix

Effect of Soaking Time on Crystal Structure of Lithium Aluminosilicate Glass Ceramic

Formation of Yttria Aluminium Garnet by Microwave Sintering

Investigation of CaCu3Ti4O12 Precursor by Simultaneous TGA and DSC Analysis in Oxygen Environment

Microstructural and Dielectric Responses of Calcium Copper Titanate Added Soda-Lime Glass for High Frequency Devices

Microstructure and Mechanical Behavior of CaCu3Ti4O12 Ceramics Hollow Fiber Prepared via Dry/Wet Spinning Method

Prediction Model and Influence of Fe2O3 on the Mechanical Properties of Porcelain with POFA as Quartz Replacement

Structural Characteristic and Dielectric Properties of Zirconia Toughened Alumina

The Effect of Calcium Carbonate Added into Mambong Clay

The Effect of Pressing Load on 8 mol% Yttria Stabilized Zirconia Grade 204NS-G

Thermal Analysis of Ca1+xCu3Ti4O12+x Precursor in Nitrogen and Oxygen Environment at 1000 °C

Thermal and Dynamic Mechanical Behaviours of CCTO/ENR-25 Composite

Effect of H2/N2 Mixtures on Reduction of Nickel Oxide

Tungsten Carbide-Nickel (WC-Ni) Coating as Potential Wear and Corrosion Protection for Metal

Dielectric and Curing Properties of ZnFe2O4 Loaded Epoxidized Natural Rubber (ENR 25)

Chapter 4: Materials for Fuel Cells, Energy Storage and Electronics

Conductivity Study of Cassava Starch Coated Anode for Zinc-Air Fuel Cell System

Electronic Properties of Calcium and Zirconium Co-Doped BaTiO3

Influence of Heating Temperature on Structure, Morphology and Electrochemical Performance of LiV3O8 Cathode for Lithium-Ion Batteries Application

Near Surface Studies on the Role of Graphene Oxide in the Carbon Species Activities in IT-SOFC Cathode Materials.

The Effect of Sn Doping on the Thermoelectric Properties of SiGe Using First Principle Technique

Thermoelectric Properties of Sm Doped CaMnO3 Using Density Functional Theory Method

Electrical Behavior of Graphene/SiO2/Silicon Material Irradiated by Electron for Field Effect Transistor (FET) Applications

Tailoring of Optical and Physical Properties of ZnO Films by Co-Doping Concentration

Chapter 5: Materials and Technologies of Chemical Production

XRD Studies on Transformation of Dolomite under CO2 and N2 Atmosphere

Comparative Adsorption Isotherm for Beryllium Oxide/Iron (III) Oxide Toward CO2 Adsorption and Desorption Studies

Application of Octadecylamine-Based Adsorbent on Carbon Dioxide Capture

Effect of Cobalt on Nickel Oxide Toward Reduction Behaviour in Hydrogen and Carbon Monoxide Atmosphere

Chemical Reduction Behaviour of NiO under Various Concentration of Carbon Monoxide Using TPR and XRD Techniques

Obtaining TiO2 and Fe2O3 from Ilmenite via Alkaline Fusion Method

Phase Evolution during Carbothermal Reduction of Langkawi Ilmenite Ore at Different Reaction Times

Self - Cleaning Property of Ag/TiO2 Thin Film

Synthesis of Visible-Light Active Monoclinic WO3 by Thermal Oxidation of Tungsten Powder for Photoreduction of Cr(VI)

Photocatalytic Activity of Bilayer TiO2/ZnO and ZnO TiO2 Thin Films

Iron Oxide Catalyst for Oxidative Desulfurization of Model Diesel Fuel

Synthesis and Characterizations of Nickel Supported on Activated Charcoal and its Application for Green Fuel Production

Chapter 6: Sustainable Natural Materials for Engineering Application

Characterizations on Microencapsulated Sunflower Oil as Self-Healing Agent Using In Situ Polymerization Method

Comparative Study on Microencapsulated of Natural and Waste Sunflower Oil as Self-Healing Agent.

Effect Band Gap of Chitosan Film in Converting Water Vapour Into Electrical Current

Effect of Activation Agents on COD Reduction Using Activated Carbon from Agricultural Residue

Effect of Stacking Sequences on Mechanical Properties of Kenaf Hybrid Composites

Effects of Ultraviolet (UV) Treatment on the Properties of Black Tilapia Fish Skins Gelatin

Estimating Suitable Starch Extraction from Mango Seeds Using Analytical Hierarchy Process (AHP) Method

Methylene Blue Removal Using Foxtail Palm Fruits as Potential Activated Carbon

Particleboard Based on Glutardialdehyde Treated Oil Palm Trunk Particles Made at Different Pressing Temperatures

Potential of Agricultural Waste Material (Ananas cosmos) as Biosorbent for Heavy Metal Removal in Polluted Water

Preparation and Characterization of Kenaf and Oil Palm Nanocellulose by Acid Hydrolysis Method

Preparation of Nanosilica Powder Using Rice Husk via Precipitation Method

Preparation of TiO2 Decorated Eggshell Membrane for Photocatalytic Dye Degradation

Swelling, Tensile and Thermal Behaviors of Citric Acid Crosslinked Tapioca Starch/Cellulose Biocomposite Films

The Effects of Henna Fillers on the Properties of Polyurethane Foam Composites

Surface Modification of 1-Butyl-3-Methylimidazolium Chloride -Treated Lignocellulosic Materials

Effect of Acid Leaching on Different State of Rice Husk

Chapter 7: Materials for Biomedical Application

A Study on Chitosan Coated Polycaprolactone (Ch-PCL) Microspheres Prepared via Double Emulsion Solvent Evaporation Method

Behavior of Osteoclast Cells Response on Dicalcium Phosphate Dihydrate Layer-Coated β-Tricalcium Phosphate Granular

Bio-Composite of Sodium Alginate-Titanium Dioxide for Wound Healing Applications

Characterization of GO:I-131 for Radioactive Clinical Waste Water Management in Nuclear Medicine.

Effect of Sintered Magnesium Substituted Biphasic Calcium Phosphate (Mg-BCP).

Notes:

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3582-4

OCLC:

1202454803