Current trends in materials engineering II : 25th scientific conference microscopy society : selected, peer reviewed papers from the 25th Scientific Conference of the Microscopy Society Malaysia (25th SCMSM 2016), December 7-9, 2016, Bangi, Selangor, Malaysia / edited by Mariatti Jaafar and Zainovia Lockman.

Format:

Book

Contributor:

Jaafar, Mariatti, editor.

Lockman, Zainovia, editor.

Series:

Diffusion and defect data. Solid state phenomena ; Pt. B, Volume 264.

Solid State Phenomena, 1662-9779 ; Volume 264

Language:

English

Subjects (All):

Materials science--Congresses.

Materials science.

Genre:

Conference papers and proceedings.

Physical Description:

1 online resource (250 pages) : illustrations.

Edition:

1st ed.

Place of Publication:

Zurich, Switzerland : Trans Tech Publications Ltd, 2017.

Summary:

25th Scientific Conference Microscopy SocietySelected, peer reviewed papers from the 25th Scientific Conference of the Microscopy Society Malaysia (25th SCMSM 2016), December 7-9, 2016, Bangi, Selangor, Malaysia.

Contents:

Intro

Current Trends in Materials Engineering II

Preface, Committees, Sponsors

Table of Contents

The Effect of Fiber Surface Treatment on the Water Absorption and Morphological Properties of Linear Low Density Polyethylene/Poly(Vinyl Alcohol)/Kenaf Composites

Influence of Catalyst in Synthesizing Brookite Thin Film Coating

Characterization of Nanocrystalline Cellulose Isolated from Empty Fruit Bunch Using Acid Hydrolysis

Microstructural Analysis on Biochar Obtained from Rubber Wood Sawdust via Slow Pyrolysis

A Transmission Electron Microscopic Evaluation of Natural Rubber/Graphene Nanocomposite

Electron Microscopy Studies on the Growth of Well-Aligned NiSi/SiC Core-Shell Nanowires Synthesized by HWCVD

Crystallization Kinetics and Morphology of Poly(Lactic Acid)/Ethylene Acrylate Copolymer Blends

Mechanical Properties of Hydroxyapatite Reinforced 45S5

Microscopic Characterization and Analysis of Electrospun TiO2-PVP and TiO2-PVDF Fibers

Characterization of TiO2 Coating Deposited on Ceramic Substrate

Polylactic Acid Scaffold Fabricated by Combination of Solvent Casting and Salt Leaching Techniques: Influence of β-Tricalcium Phosphate Contents

Effect of Particle Size of Cordierite Powder on Pore Structure of Porous Cordierite

Fabrication of Carbonate Apatite Based on Hydrothermal Reaction Using Freeze-Casted β-TCP Precursor

Microstructural Study of Newly Designed Ti-6Al-1Fe Alloy through Deformation

Influence of Hydroxyl and Carboxyl Functionalized Multi-Walled Carbon Nanotube and Filler Loading on the Tensile Properties of Epoxy Composites

Enhanced Dielectric Properties of Polyimide Matrix Using Modified Electrospun Barium Titanate Nanofibers

Effect of Different Solutions on Hydrothermal Treatment of β-Tricalcium Phosphate Scaffold.

Fabrication of PEDOT:PSS/Graphene Conductive Ink Printed on Flexible Substrate

Synthesis and Characterisation of Novel Chitosan-Hydroxyapatites Composites Doped with Zinc

Fish Scales Hydroxyapatite as Potential Fillers in HDPE Composites for Bone Replacement Applications

Comparison and Characterization of Acid Functionalization of Multi Walled Carbon Nanotubes Using Various Methods

A Comparison Study between ZnO Nanorods and WO3/ZnO Nanorods in Bromocresol Green Dye Removal

The Effect of Heating Rate and Temperature on Mechanical and Microstructure Properties of β-TCP by Microwave Sintering

Hydrothermal Growth of 1D ZnO Nanorods Thin Films for Hydrogen Gas Production through Water Splitting Reaction

Effect of Pressure and Temperature in Solid State Sintering Approach Producing Porous Tricalcium Phosphate Bioceramics

Characteristics of FeCuAl Powder Compacts Formed through Uniaxial Die Compaction Route

The Influences of Chemical and Mechanical Treatment on the Morphology of Carbon Nanofibers

Effect of Nanocellulose Loading on Tensile Properties of Nitrile Rubber

Thermal Gravimetric Analysis of Unsaturated Polyesters Filled with Alumina Trihydrate and Silica Aerogel

Studies on Tensile Properties of Compatibilized and Uncompatibilized Low-Density Polyethylene/Jackfruit Seed Flour (LDPE/JFSF) Blends at Different JFSF Content

Microstructures of Nanocellulose and Reinforcement in Nitrile Butadiene Rubber (NBR) Composites

Surface Modification of Poly(Lactic Acid) Microspheres via Gamma Irradiation

Effect of Calcination Temperatures on Phase Transformation and Stability of β-Tricalcium Phosphate Powder Synthesized by a Wet Precipitation Method

Bacto-Agar and Commercial Agar as Binder for Porous Zinc Anode.

Surface Morphology and Hydrophilicity Evaluation of PLA Microspheres Treated with Boronhydride (NaBH4) at Different Concentrations

The Morphology and Mechanical Study on Neolamarckia cadamba and Endospermum diadenum in Wood Composite for Particleboard Application

Moisture Absorption Behavior and Morphology of Thermoplastic Starch via Ascorbic Acid Hydrolysis Technique

Effect of NaOH Concentration on the Formation of TiO2 Nanotube Arrays by Anodic Oxidation Process for Photoelectrochemical Cell

Acidolysis Effect on Starch in Polylactic Acid (PLA)/Thermoplastic Starch (TPS) Blend

Behaviour of T91 Steel Oxide Scale Exposure to Temperature at 540°C for Different Exposure Duration

Microstructure and Mechanical Properties of TiO2 Coatings Prepared by Plasma Spray Technique

Morphology of CuO-Doped Activated Carbon from Kenaf Core Fiber

Effect of Sintering Heating Rate on CaCu3Ti4O12 Formation

Effect of Fly Ash Composition on Electrodeposited Nickel-Fly Ash Composite Coatings on Aluminium Alloy 7075 Substrate

Optimization of Fluidised Bed Granulation Process Parameters for Urea Granule Manufacturing Using the Response Surface Method

Characterization of Phase Formation in Al-20%Mg2Si-2%Cu Metal Matrix Composite

Effect of Sintering Temperature on the Morphology and Adhesion Strength of Eggshell Coating on Mild Steel

Effect of Microwave Plasma Power on Topographical Change in Epoxy Composites

Utilization of Metroxylan sagu Pith Waste as Biodegradable Filler for Natural Rubber (NR) Latex Films

Corrosion of Aluminum Alloy Used as Sacrificial Anode for Steel Embedded Concrete Transmission Tower in Brackish Mud

Microstructural, Mechanical and Dielectric Properties of CCTO/Epoxy Composite

Formation of Cobalt Doped Zinc Oxide Photocatalyst for Methyl Orange Degradation.

Microstructure of CuO Assisted Activated Carbon Adsorbent from Rubber Wood Sawdust Produced by Mechanochemical Processing

The Effect of Addition of Polysaccharide Materials on the Morphology of Freeze Fracture Surface of Natural Rubber Latex Films

Anodic ZrO2 Nanotube Arrays Formation by Anodisation in Ethylene Glycol with Varying Amount of Water

Processibility and Thermo-Mechanical Properties of Epoxy as Reactive Plasticizer of Polyetherimide

Effect of Hydrothermal Treatment in Calcium Phosphate Solution on SUS304 Substrate

Photodegradation Improvement of Low-Density Polyethylene Thin Film with gC3N4/5ZnO/TiO2 Photocatalysts

The Effects of Deposition Time and Seed Layer on Morphological Properties of Zinc Oxide by Chemical Bath Deposition

Keyword Index

Author Index.

Notes:

Includes bibliographical references at the end of each chapters and indexes.

Current copyright fee: GBP28.00 50\0.

Description based on online resource; title from PDF title page (ebrary, viewed November 20, 2017).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3160-8

OCLC:

1009333516