23rd Brazilian conference on materials science and engineering : selected, peer-reviewed papers from the 23rd Brazilian Conference on Materials Science and Engineering (23rd CBECIMAT), November 4-8, 2018, Foz do Iguaçu, Brazil / edited by Luzinete Pereira Barbosa and Lalgudi Venkataraman Ramanathan.

Format:

Book

Contributor:

Pereira Barbosa, Luzinete, editor.

Ramanathan, L. V., editor.

Series:

Materials Science Forum Series

Materials Science Forum Series ; v.Volume 1012

Language:

English

Subjects (All):

Alloys.

Physical Description:

1 online resource (521 pages)

Edition:

1st ed.

Place of Publication:

Baech, Switzerland : Scientific.Net, [2020]

Summary:

Selected peer-reviewed full text papers from 23rd CBECIMATSelected, peer-reviewed papers from the 23rd Brazilian Conference on Materials Science and Engineering (23rd CBECIMAT), November 4-8, 2018, Foz do Iguaçu, Brazil.

Contents:

Intro

23rd Brazilian Conference on Materials Science and Engineering

Preface

Table of Contents

Chapter 1: Composite Materials

Evaluation of the Influence of Pre-Alloyed Powder Fe65Nb on the Production of Metal Matrices by Powder Metallurgy

Elastic Wave Propagation in a Bio-Inspired Phononic Crystal

Tensile Properties of Epoxy Matrix Reinforced with Fique Fabric

Comparison of Mechanical Properties of Banana Fibers Reinforcement in Different Thermoset Matrix Composites

Novel Sustainable Composites with Geopolymeric Steel Slag and Recycled from Packing PET

Evaluation of PP/Wood Flour Composite Processing Using Computer Simulation

Influence of Mercerization Process on the Surface of Coconut Fiber for Composite Reinforcement

Influence of Degradation on the Ballistic Behavior of Aramid Fabric Reinforced Polymeric Armor Composites

Chapter 2: Polymeric Materials

Evaluation of the Mechanical Behavior of Bisphenol-A Polycarbonate after Thermal Degradation

Influence of Glycerol Content on the Physic-Chemical and Mechanical Properties of Cassava Starch Films

Influence of the Order of Incorporation of Sulfur in the Mechanical Properties of Vulcanized Nr Compounds

Comparative Study of the Degradation of the Green HDPE and Petrochemical HDPE in the Primary Recycling

Evaluation of Low-Density Polyethylene Thermomechanical and Fractographic Behavior after Ultraviolet Radiation Exposure

Preparation and Characterization of Polysulfone / Recam® Composite Membranes for Potable Water Production

New Applications of Tire Powder Recycled by Micro-Waves

Quasi-Static and High Strain Rate Uniaxial Compressive Response of Recycled Polycarbonate from Industrial Waste

Study of Mechanical Behavior of Polycarbonate after Thermal Degradation.

Evaluation of Temperature Influence on Tensile Strength and Izod Impact Resistance on Poly Methyl Methacrylate (PMMA)

Chapter 3: Materials for Electrochemical and Photovoltaic Application

Influence of Separator Thickness on the Performance of Electric Double Layer Supercapacitors in Aqueous Electrolyte

Study of Supercapacitors for Use in Dye Sensitized Solar Cells

Effect of the Heat Treatment on the Microstructure and Morphology of Cigs Thin Films Prepared by RF Magnetron Sputtering at Room Temperature

The Effect of Vacuum Annealing and HDDR Processing on the Electrochemical Characteristics of Activated Carbon and Graphene Oxide for the Production of Supercapacitors Electrodes

Effects of Electrolyte Substitution on the Specific Capacitance and Equivalent Series Resistance of Energy Storage Electrochemical Supercapacitors

Study of CaF2- Doped PbTe Thin Films Grown by Molecular Beam Epitaxy

Low-Temperature Reduction of Graphene Oxide Using the HDDR Process for Electrochemical Supercapacitor Applications

Influence of the Electrolyte Potential Window on the Electrical Characteristics of Supercapacitors Operating Elevated Temperatures

The Influence of the Addition of rGO and CNT on the Electrochemical Properties of the Batteries the LaNi-Based Battery Alloys

Graphite Electrodes for Hydrogen Production by Acid Electrolysis

Chapter 4: Functional Ceramics and Metal Oxides

Impact of ZnO Concentration on the Stability of Agglomerates of TiO2 Engineered Nanoparticles: Effects of the pH, Ionic Strength and Zeta Potential

Evaluation of the Influence of the Reaction Medium of the Microstructure of Magnesium Oxide Nanopartícles

Thickness Estimation of TiO2-Based Nanotubes Using X-Ray Diffraction Techniques

Microstructural Analysis of Zinc Niobate Ceramics Processed by Microwave Thermal Treatment.

Sintering Behavior of AL2O3 Ceramics Doped with Pre-Sintered NB2O5 and LiF

Novel Alumina Compounds with Niobia, Silica and Magnesia for Ballistic Armor

Processing, Characteristics and Properties of Cubic Boron Nitride - An Updated Review

Characterization of Nanostructured Mn-Zn Ferrites Synthesized by Coprecipitation Method Using CTAB

Chapter 5: Structural Ceramics

Waste of Civil Construction for Use in Mortar and Production of Structural Concrete

Limestone Waste Incorporation in Clayey Mass for Rustic Ceramic Tiles Manufacturing

Water Absorption and Transport in Clay Bricks

Use of Ceramic Waste for the Manufacture of Sintered Parts

Microstructural Characterization of Slag Residue Incorporated into Clay for Production of Red Ceramics

Recycling of Steel-Making Plant Waste into Heavy Clay Ceramic- Industrial Test

Effect of the Incorporation of Marble Waste in the Properties of Clay Ceramic Bricks

Study of the Potential of Adhesion to the Substrate of Masonry and Tensile in the Flexion in Mortars of Coating with Gray of the Sewage Sludge

Addition of Ornamental Rock Residues on Ceramic Blocks: Physical and Chemical Analysis

Behavior of Mortar with the Addition of Sugar Cane's Ash Residues

The Use of Thermogravimetric Analysis to Characterize the Metallic Slag Aggregates in Structural Concrete

Selective Laser Sintering of Biomaterials and Composites State of the Art and Perspectives

Citric Acid Effect in High early Type Portland Cement Pastes and Mortars

Chapter 6: Steels and Alloys

Equal Channel Angular Pressing Consolidation and Heat Treatment of Blended Elemental Powders of Fe-Mn-Al

Effect of Post-Weld Heat Treatment on Hardness in Superduplex Stainless Steel ASTM A890/A890M - Grade 6A.

Microstructural Characterization and Mathematical Modeling for Determination of Volume Fraction of Eutectoid Mixture of the Cu-8.5wt% Sn Alloy Obtained by Unidirectional Upward Solidification

Influence of the Thermal Parameters on the Microstructure, Corrosion Resistance and Hardness on the Unidirectional Solidification of Al-10wt% Si-5wt% Cu Alloy

PrFeB Based Alloys Obtained by Melt Spinning for the Production of Permanent Magnets

Mechanical Resistance of High-Speed Steels Cr-W-Mo-V, Si-Mn-Cr-Mo-V-Co, Si-Mn-Cr-Mo-V and Si-Mn-Cr-Mo-V-Co Heat Treated

AISI 310 Stainless Steel Formed by Gelcasting: An Alternative Manufacturing Method

Influence of the Deep Cryogenic Treatment at the Phase Transformation Temperatures and at the Stabilization of the Cu-14Al-4Ni SMA Alloy

Thermal Transformations of the Nickel Laterite Agglomerate Phases and their Metallurgical Influence

Obtention of Nb47Ti and Ti13Nb13Zr Alloys Powders by Hydride-Dehydride Process for Additive Manufacturing Applications

Characterization and Evaluation of Mechanical Properties and Residual Stress in Aluminum-Magnesium Alloys Welded by the FSW Process

Microstructural Characterization of Joints of Inconel 718 Brazed on Vacuum Furnace

Equal Channel Angular Pressing and Characterization of a Patented Eutectoid Fe-C Steel

The Influence of the Microstructure of an HHA Steel on the Formation of Adiabatic Shear Bands, after High Deformation Rates

Study of Superioring of a Seal Soldered by Tig Process of the Aluminum League 6061

Promising Ballistic Behavior of CoCrFeMnNi High Entropy Alloy

Chapter 7: Corrosion Behavior, Protective Coatings and Surface Engineering

Study of the Corrosion of Carbon Steel (SAE 1020) Coated with Niobium Oxides.

Inhibitory Action of Persian Pyrifoliabark Extract against Corrosion of SAE 1020 Carbon Steel in Sodium Chloride Medium

Electrochemical Corrosion Behavior of Iron Aluminides in Sulfuric Acid

Study of Corrosion Behavior of Friction Surfacing AA6351 Aluminium Alloy Coating on AISI 1020 Low Carbon Steel

Study of Corrosion of AA 3003 Aluminum in Biodiesel, Diesel, Ethanol and Gasoline Media

Calibration of the AC Potential Dropping System (ACPD) for Determination of Crack Growth in API 5L X65 Steel under Cathodic Protection Effect

The Influence of Temperature on the Tribological Properties of the Ti6Al4V Alloy Treated by Plasma Oxidation

Influence of the Electrolyte Composition on the Corrosion Behavior of Anodized AZ31B Magnesium Alloy

Quantitative Analysis of the Sensitization of an Austenitic Stainless Steel Aged between 600 and 900°C through Electrochemical and Microstructural Measurements

Laser Welding Influence on Corrosion Rate of Galvanized Sheets of DP600 Automobilistic Alloy

Influence of Roughness on Corrosion Resistance of Carbon Steel SAE 1020 and DOMEX® 700 MC Steel

The Chemical Deposition of Polypyrrole at a Copper Surface Varying Concentrations of Salicylic Acid in the Reactive Medium

Metallic Surface Coating of Polymeric Parts Produced by Additive Manufacturing Process

Chapter 8: Biomedical Materials and Applied Biotechnologies

Analysis of the Pullout Testing of Straight and Angled Abutments in Narrow Diameter Implants

Microstructural Characterization and Mechanical Properties of As-Cast Ti-12Mo-25Nb Biocompatible New Alloy

Failure Analysis of Metallic Orthopedic Implant for Total Knee Replacement

Modifications of Titanium and Zirconium Alloy Surfaces for Use as Dental Implants.

Study of the Feasibility of Biodiesel Production, from Vegetable Oils and Catalysts of Seafood Residues, in a Batch Hydrogenation Reaction Unit, Assisted by Microwave and Conventional Heating.

Notes:

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3746-0

OCLC:

1237865741