High technology : research and applications 2016 : HTRA-2016 : selected, peer reviewed papers from the V International Science and Engineering Conference "High Technology: Research and Applications" (HTRA), December 5-7, 2016, Tomsk, Russia / edited by Georgii E. Osokin and Ekaterina A. Kulinich.

Format:

Book

Contributor:

Osokin, Georgiy, editor.

Kulinich, Ekaterina A., editor.

Series:

Key engineering materials ; Volume 743.

Key Engineering Materials, 1013-9826 ; Volume 743

Language:

English

Subjects (All):

High technology industries--Congresses.

High technology industries.

Physical Description:

1 online resource (500 pages).

Edition:

1st ed.

Place of Publication:

Zürich, Switzerland : Trans Tech Publications, 2017.

Summary:

HTRA-2016Selected, peer reviewed papers from the V International Science and Engineering Conference _High Technology: Research and Applications_ (HTRA), December 5-7, 2016, Tomsk, Russia.

Contents:

Intro

High Technology: Research and Applications 2016

Preface

Table of Contents

Chapter 1: Steels and Alloys

Influence of Additives of Nanoparticles on Structure Formation of Fine-Grained Hardmetals

Evaluation of Physicomechanical Properties of Ti-45Nb Specimens Obtained by Selective Laser Melting

Investigation on the Origin of Magnetization in Plastically Deformed NI51TI49 Alloy

The Effect of Preliminary Mechanical Activation on the Structure and Mechanical Properties of Ni3Al+B Material Obtained by SPS

Obtaining Intermetallic Compound Copper-Tin: Plasma Dynamic Synthesis and Spark Plasma Sintering

Investigation of Structure and Magnetic Properties of 36NiCrTiAl Alloy and 12Cr18Ni10Ti Steel Welded Joints

Microstructural Changes of Mechanical Properties of 08Cr18Ni10Ti Austenitic Steel under Neutron Irradiation

Technology of Ti-Al-Nb Obtaining by Use of Spark Plasma Sintering Method

Chapter 2: Composites

Obtaining a Metal Composition Material by Dynamic Interaction of the Melt with Reinforcing Fibers

Pre-Treatment of Vegetable Waste in the Production of Composite Materials

Contact Melting Mechanism in the Cu-Ti System

Influence of Compression Load and Counterface Roughness on Abrasive Wear Characteristic of UHMWPE

Features of the Defectiveness of Nanomodified High-Strength Lightweight Concrete Based on Hollow Microspheres

A Technology for Production of Carbon-Graphite-Aluminium Alloy Composite and Areas of its Application

Chapter 3: Function Materials

Anisotropic Materials Based on Magnetic Microwires in EHF Range

Analysis of Statistical Characteristics of Quasi-Breather with Soft-Type of Nonlinearity in the Crystals of A3B Stoichiometry

The Effect of Heat Treatment on the Shape Memory Effect and Superelasticity in NiMnGa Single Crystals.

Creating a Varistor Based on Zinc Oxide (ZnO) Powder Obtained by Plasma Dynamic Method

Technology for Processing Electro-Shunter Axle Bearing of Electric Locomotive VL-60

Chapter 4: Coatings and Surfaces

A Production Method for Wear-Resistant Deposited Coatings Modified with TiN Particles

Structural Characteristics of Diamond-Like Carbon Films Synthesized by Different Methods

Metallographic Study of Mesostructure-Ordered Plasma Ceramic Coatings

Modification of Calcium Phosphate Microarc Coatings Surface by Boehmite Nanoparticles

Plasma-Immersion Modification of Nitinol Surface with Silicon to Improve the Corrosion Resistance of the Alloy in Biological Media

Creation of the Combined Heat-Resistant Coating with Gradient Modification of Layers and Methods of its Testing

The Mathematical Modeling of the Initial Stage of Ion Implantation into the Target with Coating

Comparison of SPH and MLSM for Powder Particle Impact Modelling

Mechanical Properties and Structure of the Hypereutectic Silumin Treated by an Electron Beam

Chapter 5: Research and Simulation of the Mechanical Properties of Structural Materials

A Three-Dimensional BEM for Dynamic Analysis of Anisotropic Elastic Multi-Connected Bodies

Modeling of Wave Propagation in the Unsaturated Soils Using Boundary Element Method

Determination of Ultimate Dimensions of Crack-Like Defects in a Wall of Vertical Steel Tanks with Specified Volume of 20000m3

The Dynamic Analysis of a Slab on a Poroviscoelastic Halfspace under Vertical Load via BEM

Prediction of Mechanical Properties of Ceramic Biocomposite on the Basis of Numerical Modeling

The Simulation of Titanium-Aluminium Composite with Intermetallic Inclusions Behavior under Compression

Modeling the Formation of Grain Boundaries as a Result of Two-Sided Crystallization Using Molecular Dynamics.

The Effect of a Severe Plastic Deformation by Groove Pressing on the Grain Structure of the Al-Mg Alloy

Features of Dynamic Strain Aging of Low-Carbon Steels during Severe Plastic Deformation Processing

Contributions of Various Strengthening Mechanisms to the Flow Onset Stress in the ECAP-Processed Cu-Cr-Zr Alloy

Mechanical Properties of Ultrafine-Grained Al-Mg Alloy Produced by Severe Plastic Deformation

Influence of the Sheet Metal Anisotropy on Polythickness of the Skin after Stretch Forming

The Implementation of Algorithm Iterative Conversion for Three-Component Composite on the Example of Solution of the Bending Plate Problem

The Hybrid Effective Modules of Viscoelastic Composites

Change of Void Volume of Steel Sheet Rough Layer after Deformation by Roll with Given Surface Roughness

Chapter 6: Technologies of Mechanical Processing and Joint of Materials

Researching Signals from Workpiece Backside during Electron Beam Welding in Full Penetration Mode

Simulation of Honing of a Processed Workpiece on CNC Machine

Electron Beam Welding of Dissimilar Materials

Finishing and Hardening of a Flat Surface Ring Area of a Workpiece by Rotary Burnishing

Сomputer Simulation of Machining

Influence of Cutting Tool Wear on Contact Stresses and Temperature Distribution in Titanium Alloy Machining

Split Cutter Method for Contact Stresses Research over Flank Surface of a Cutter

The Structure and Mechanical Properties of VT23 Welded Joints with Surface Layer Modified by Ultrasonic Mechanical Forging

Optimization of Solid Rocket Motor Quenching in Gas Dynamic Tunnels during Firing Bench Tests

Features of the Metal Structure Formation in Cryogenic Equipment during Long-Term Operation at 4.2 K

Chapter 7: Electrochemical Processes and Materials.

Performance Characteristics of Solid Oxide Fuel Cells with YSZ/CGO Electrolyte

Electrocatalytic Oxidation of Hydrogen Peroxide on the Graphite Electrode Based on Silver Nanoparticles

The Porous Structure Characterization of Products of Non-Equilibrium Electrochemical Oxidation of Copper and Cadmium

Polymer Membranes for Hydrogen Fuel Cells

Chapter 8: Materials and Technologies of Environmental Engineering

The Oxidative Destruction of Substandard Tributyl Phosphate Organic Solutions under Mild Conditions

Study of the Sorption Properties of Synthetic Sorbents Produced Based on Alumino-Phenylsiloxane

The Electrochemical Method of Oil-Contaminated Soil Remediation

Phytotesting as a Method of Determining the Degree of Eutrophication of Water Objects

Effects of AC Frequency on the Physicochemical Characteristics of Water

Recycling Red Mud of JSC Ural Aluminum Plant with the Recovery of Iron and Construction Materials

The Effect of Drilling Waste on Water Resources - The Elemental Composition of Waste

Electrochemical Recycling of Still Waste Liquid in Ammonia Soda Production

Chapter 9: Organic Chemistry and Biotechnologies

Study of Antigenic Activity of Experimental Samples of the Conjugated Vaccines Based on Synthetic Oligosaccharide Ligands and CRM197 Carrier Protein against Candida albicans, Aspergillus fumigatus and Pseudomonas aeruginosa

Ionic Liquids as Catalysts for the Acetylation of Camphene

Chapter 10: Simulation of Physicochemical Processes in Metallurgical and Chemical Technologies

Optimization of the Blast Furnace Operating Modes for Identification of the Areas of Unimprovable Solutions

Numerical Modelling of the Molten Metal Flow in a Disk Agitator Mixer

Separation Features in Hydrocarbon Media at Thermobaric Regimes of Petroleum Preparation Devices Functioning.

Heat Treatment of Crushed Wood in Rotary Drum Dryers

Numerical Simulation of Flow Distribution in the Packed Bed Reactor with the Supply Nozzle Placed on the Sidewall

Analysis of Accumulation and Crystallization of Boric Acid in the Reactor Core during WWER Emergency Operation

The Study of Technological Mode Options for Production of Oil of Required Quality

Chapter 11: Technologies of Rational Use and Processing of Mineral Resources

Composition Development and Production Technology of Stone Casting Silicate Materials and Items

Development of Slag Base for Welding Fluxes from Man-Made Mineral Formations of Ural Mining and Smelting Companies

The Use of the Finite Element Method for Ensuring Efficient and Safe Extraction of Minerals

Ore Mineralization in Adular-Fluorite Metasomatites: Evidence of the Podgolechnoe Alkalic-Type Epithermal Gold Deposit (Central Aldan Ore District, Russia)

The Geochemical Features of Epithermal Gold-Telluride (Au-Te) Ores of the Podgolechnoe Deposit (Central Aldan Ore District, Yakutia)

Methods of Increasing Strength of Aluminosilicate Ceramics Based on Semi-Flint Clay Raw Materials

Comparison of the Projected Results of Coarse Thermal Coal Cleaning in Various Gravity Separation Apparatuses

The Impact of Microwaves of Different Timing on the Structural and Chemical Characteristics of a Carbonaceous Natural Material

Chapter 12: Testing Methods and Numerical Simulation

X-Ray Tomography Simulation Based on Direct Radon Transform

Numerical Simulation of Heat Transfer in a Closed Two-Phase Thermosiphon

A New Approach to the Assessment of the Analysis Method Accuracy

Automatized Control of Polymer Optical Parts

The Use of Electromagnetic-Acoustic Method for Estimating the Stress-Strain State of the Metallic Elements of Power Equipment.

The Optimization of Parameters of a Technological Tank Battery for Liquefied Petroleum Gas.

Notes:

Includes indexes.

Description based on online resource; title from PDF title page (EBC, viewed November 28, 2017).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3135-7

OCLC:

1009305443