Functional and functionally structured materials II : chinese materials conference 2017 (cmc 2017) / edited by Ya Fang Han.

Format:

Book

Contributor:

Han, Yafang, editor.

Series:

Materials science forum ; Volume 913.

Materials Science Forum, 1662-9752 ; Volume 913

Language:

English

Subjects (All):

Materials--Congresses.

Materials.

Physical Description:

1 online resource (1,115 pages) : illustrations.

Edition:

1st ed.

Place of Publication:

Zurich, Germany : Trans Tech Publications Ltd, 2018.

Summary:

Chinese Materials Conference 2017 (CMC 2017)Selected, peer reviewed papers from the Chinese Materials Conference 2017 (CMC 2017, Yinchuan City, Ningxia, China, July 06-12, 2017).

Contents:

Intro

Functional and Functionally Structured Materials II

Preface

Table of Contents

Chapter 1: High Performance Structural Alloys, Properties and Processing Technologies

Effects of the Delivery Tube Diameter on the Qualities of Cu-9.7Sn-0.2P Alloy Powder Produced by Gas Atomization

Effect of Cold Rolling Reduction on Recrystallization Behaviors of AA5754 Sheets in a Short Annealing Time

Property Requirements and Research Progress of Aluminum Alloy Sheets for Automotive Closure

Thermal Deformation Behavior and Processing Map of Al-Mg-Er Alloy

Bake Precipitation Behavior in AA5182 Sheet for Can End Stock

Hot Compression Deformation Behavior and Microstructural Evolution of Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr Alloy

Effect of Cold Deformation and Annealing on Microstructure and Mechanical Properties of 5083 Aluminum Alloy Sheets

Microstructural Changes and Thermal Stability of A201, 319s and 2618 Aluminum Alloys during Thermal Exposure

Deformation Behavior and Microstructure Evolution of 6063 Alloy during Hot Compression

Trace Al-Ti-C-Ce on Solidification Structure Transformation and Fracture Properties of Al-Cu-Mn Alloy

Effect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of ZL205A Alloy

Effects of Mechanical Vibration on Double Curvature Creep Aging Forming of 2124 Aluminum Alloy

Aging Behavior of A356.2 with Yb Modified

An Experimental Platform for Controlled Solidification and Heat Treatment and its Application in TiAl Alloys

Superplastic Deformation Behavior and Cavity Formation of Ti55 Titanium Alloy

Effects of Heat Treatment on Microstructures and Mechanical Properties of Ti-38644 Alloy for Aerospace Fasteners

Characteristics and Evolution Mechanism of Solidification Microstructure for Laser Additive Manufactured Ti2AlNb-Based Alloy.

On the Partial Pressure Measurement and Activity Calculation of Mn in the Ni-Cr-Co-Mo Alloy Melt

Microstructure Analysis and Creep Behaviour Modelling of Powder Metallurgy Superalloy

Effects of Phosphorus on Microstructure and Mechanical Properties in NiCr Alloys

Segregation and Precipitation Behavior of Phosphorus in a Ni-Fe-Cr Base Wrought Superalloy

Effect of Extrusion Texture on Mechanical and Electrochemical Properties of Aluminum Alloy Drill Pipe

Numerical Simulation of Combustion Resistant Titanium Alloy Wear Behavior at High Temperature Fields

Effects of Extrusion-Shear and Direct Extrusion on the Plastic Deformation of AZ31 Magnesium Alloy

Effect of Welding Parameters on Defects and Fracture Behavior of Friction Stir Welded 2195-T8 Al-Li Alloy Joints

Effect of Planar Anisotropy and Tension-Compression Asymmetry of CP-Ti on its Deep Drawing Behavior at Room Temperature

Effects of Solid Solution and Aging Treatment on Texture Evolution and Properties of Cu-Ni-Si Alloy

A Comparative Study on the Friction and Wear Properties of Three Different Copper Alloys

Experimental Study and Numerical Simulation of Microstructure Evolution in Al-Si Eutectic Solidification Process

Influence of Silicon on Nucleation and Growth Process of Spherical Graphite in Ni-C Alloys Solidification Structure

Effects of Process Parameters on Morphologies and Microstructures of Laser Melting Deposited V-5Cr-5Ti Alloys

Chapter 2: Steels and Structural Metals, Properties and Processing Technologies

Rate Theory for Dislocation Loops Evolution in AL-6XN Austenitic Stainless Steel under Proton Irradiation

Fatigue Mechanism of Domestic 316LN Stainless Steel in Simulated AP1000 First-Loop Water Environment

Influence of Warm Deformation on Strain-Induced Martensite Behavior of 316L Stainless Steel.

Formation of Face Centered Cubic Titanium Thin Films on MgO(111) Single Crystal Substrate

Effect of Annealing Temperature on Microstructure and Properties of Ultra Purified Ferritic Stainless Steel Containing Copper

Microstructure Evolution of Copper Strip during Continuous Extrusion and Rolling Forming

Effect of Copper and Annealing Dew Point on Oxidation Behavior of C-Si-Mn Steels

Bare Spot Defect on a Hot Dip Galvanized DP Sheet Strip

Effect of Slab Centerline Segregation on DWTT Properties of 22mm Thick X80M Hot Rolled Steel Strip

Effect of Ultra-Fast Cooling Rate on the Microstructure and Mechanical Properties of High Strength Cold-Rolled Sheet under Continuous Annealing

Microstructure and Properties of HAZ in Low-Carbon Bainite E550 Steel during Double-Pass Welding Thermal Cycle

Nondestructive Evaluation Method of Average Grain Size in TWIP Steel by Laser Ultrasonic

Strain-Hardening Properties of High Grade Line Pipes

Transfer Welding Process and Microstructure and Properties of Titanium/Steel Clad Pipe

Simulation Study on Heating Process of Hot Rolled Steel Strip for X80M Pipeline Steel

Development of Domestic CT80S Sulfur Resistance Coiled Tubing

Chapter 3: Functional Coatings, Claddings, Surface Treatment and Corrosion Behavior of Structural Materials

Microstructure and Oxidation Resistance of Y Modified Silicide Coatings Prepared on Zr-Ti-Al Alloy

Bio-Inspired In Situ Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion Protection

A Thick Al-Based Composite Coating Cladded by the Amorphous Powder

Wear Resistance of a Large Thick Fe Based Amorphous Composite Coating Deposited by Laser Cladding

Electrodeposition and the Optimization of Molybdenum Layer on Nb-Ti-Si Based Ultra-High Alloys from Aqueous Solution.

Efficient Micro-Arc Oxidation Technology for As-Cast AZ80 Magnesium Alloy

Morphology and Microstructure of Tungsten Films by Magnetron Sputtering

Understanding the Inhibition Mechanism of a Supramolecular Complex as the Corrosion Inhibitor for Mild Steel in the Condensate Water

Influence of Sc Addition on the Corrosion Behavior of Medium Strength Al-Zn-Mg Alloy

Effect of Sodium Citrate on Electrochemical Behaviour of Copper in Acid Bath

Chapter 4: Functional Ceramics and Composite Materials

Effect of WC Additive on Microstructural Evolution and Properties of TiC Steel-Bonded Carbide

Effects of Lanthanum Substitution on Dielectric, Ferroelectric and Electro-Optic Properties of Slim-Loop PLZT Ceramics

Preparation and Characterization of Mechanical Properties of Hydroxyapatite/Carbon Nanotube Laminated Ceramic Composites Consolidated by Spark Plasma Sintering

Raman/Infrared Spectra and Microwave Dielectric Properties of 0.22CaTiO3-0.78(Li0.5Sm0.5)TiO3 Ceramics with MgO Additive

Effects of Different Matrix on Interface and Compression Fracture Behavior of WC Particles Reinforced Iron Matrix Composites

The Structural Evolution of Al-6Y-2P Master Alloy and its Influence on the Refinement of Mg2Si Phase in Mg2Si/Al Composites

Establishment of Processing Maps for 25vol.% B4CP/AA6061 Composite and its Application in Hot Pack-Rolling Process

A Facile Method of Preparing Core/Shell Cu@Mo Powders

In Situ Synthesis and Structural Design of Ti/TiC Functionally Graded Materials

Microstructure and Mechanical Properties of AlN Particle Reinforced Mg-Al Matrix Composites with Different Particle Contents

Effect of Carboxylic CNTs Filling on Mechanical Behaviors of Basalt Fiber/Epoxy Composites

Machinability for C/SiC Composite Material by Electrical Discharge Machining.

Interfacial Microstructure and Formation Mechanism of Zirconia Ceramic and Nb Brazed with Ag-Cu-Ti Powder without and with Mo-Particle-Reinforced

Effect of Modified Diatomite on Crystallinity and Mechanical Properties of Polypropylene

3D Printing of Carbon Fiber Reinforced Plastics and their Applications

Interfacial Effect on Mechanical Properties of Polypropylene Ternary Nanocomposites

Chapter 5: Computational Procedures in Materials Science

Structures, Mechanical Properties and Band Structures of Pentagonal BxNy Monolayers

First-Principles Study of the Effect of Cr Content on Interstitial Oxygen Solution Behavior in Nb-Cr Alloys

Thermodynamic Calculation of Liquidus Projection of Multiple Aluminum Alloys

Stability, Mechanical Properties and Electronic Properties of X3Si (X=V, Nb, Cr, Mo and W) from First Principles Calculations

Tensile Properties of Carbon Nanoring Linked Graphene Sheets: A Molecular Dynamics Investigation

CRSS of Mg-X(X=Zn, Y) Binary Solid Solution via First-Principles Study

Design of New Weathering Steels through Thermodynamic Model of Nitrogen Solubility and CALPHAD

Influence of Initial Defects on the Mechanical Properties of Single Crystal Copper: Discrete Dislocation Dynamics Study

CBED and EELS Measurements of Post-Irradiated Aluminum Specimen Thickness

Cascade Collision near the Grain Boundary of Fe-Cr Alloy by MD Simulation

Chapter 6: Advanced Functional Materials

Magnetic Properties of Pure Iron with Respect to Different C/Si Ratios and Grain Sizes

Iron-Based Amorphous Magnetic Properties by Ni Content Tuning and Isothermal Treatment

A Centimeter-Size High Toughness Zr-Cu-Al-Nb Bulk Metallic Glass with Nano-Crystallization and Phase Separation

Effect of Service Environment on Mechanical Properties of FeCoNiCrAl0.1 Alloy.

Y-Ray Shielding Performance and Mechanical Properties of Mortar Strengthened by Amorphous Alloy Fibers.

Notes:

"Selected, peer reviewed papers from the Chinese Materials Conference 2017 (CMC 2017), Yinchuan City, Ningxia, China, July 06-12, 2017."

Includes bibliographical references at the end of each chapters and indexes.

Description based on online resource; title from PDF title page (EBC, viewed March 22, 2018).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3244-2

OCLC:

1028197485