Advanced materials and engineering materials VIII : selected, peer reviewed papers from the 8th International Conference of Advanced Materials and Engineering Materials (ICAMEM 2019), April 18-19, 2019, Hong Kong, China / edited by Prof. Peng Sheng Wei.

Format:

Book

Contributor:

Wei, Peng-Sheng, editor.

Series:

Key engineering materials ; 814.

Key engineering materials ; 814

Language:

English

Subjects (All):

Materials--Congresses.

Materials.

Physical Description:

1 online resource (543 pages).

Edition:

1st ed.

Place of Publication:

Zurich, Switzerland : Trans Tech Publications, [2019]

Summary:

8th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2019)Selected, peer reviewed papers from the 8th International Conference on Advanced Materials and Engineering Materials, (ICAMEM 2019), April 18-19, 2019, Hong Kong, China.

Contents:

Intro

Advanced Materials and Engineering Materials VIII

Preface

Table of Contents

Chapter 1: Composites

Preparation and Properties of Tea Polyphenol Modified Graphene Oxide/Epoxy Resin Composites

Two-Stage Sintering of Alumina-Y-TZP (Al2O3/Y-TZP) Composites

Pressing and Bonding Strength of Metal Matrix Composite

Influence of Molding Pressure on Properties of Al2O3- Al Composite Materials Sintered via Vacuum Sintering Method

Kinetic Processes in Polydisperse Systems: Experience of Practical Approximation

Chapter 2: Nanomaterials and Nanofabrication

Synthesis of Diamond-Like Structures by Method of Mechanochemical Treatment of Nano-Carbon Materials (Taunit)

Optical and Electrical Properties of Diamond-Like Carbon Thin Film with Deposition by ECR-CVD System

Highly Increased Flow-Induced Voltage Generation on Hybrid Membranes of Monolayer Graphene and Single-Walled Carbon Nanotubes

Effect of Reaction Time on Surface Nano-Structure of TiN Oxide Nanofilm by Hydrothermal Method

Toughened Poly(Trimethylene Terephthalate) by Melt Compounding with Functionalized Graphene Oxide Nanocomposites

Controlled Hydrothermal Synthesis of K2Ti6O13 Nanowires and their Photo-Electronic Response

Electrochemical Degradation of p-Nitrophenol on Cu Nanowires and Nanocubes

Photoelectric Response Difference between KTaO3/ Au and K2Ta2O6/Au Nanocrystals Resulting from Potassium Tantalate Structure

Preparation and Characterization of In Situ Nanocomposites of Graphene Nanosheets/Polyurethane

Crystalline Morphology and Crystallization Behavior of Poly(Trimethylene Terephthalate)/Functionalized Graphene Oxide Nanocomposites Prepared by Melt Compounding

Microstructure Analysis and Preparation of Graphene Reinforced Aluminum Matrix Composites

Analysis of Electroluminescence Application on Display.

Preparation and Characterization of 3-Glycidoxypropyltrimethoxysilane Functionalized Graphene Oxide

Chapter 3: Properties of Steel and Alloys, Processing Technologies and Manufacturing Processes

Low Cycle Fatigue Life Evaluation According to Temperature and Orientation in Nickel-Base Superalloy

Effect of Frequency to Ultrasonic Vibration-Assisted Wire-EDM

Deformation Analysis of TC4 Titanium Alloy Shell Material

Cr12MoV Die Repair Experiment Based on Laser Cladding with Wire

Effect of Citric Acid on Cerium Conversion Coating of Hot-Dip Galvanized Steel

Subsurface Stress Distribution and Failure of PPS Thrust Bearings under Rolling Contact Fatigue in Water

Study on the High Temperature Creep Behavior of 30Cr25Ni20 Heat-Resistant Steel

Effect of Different Hole-Making Technology on Fatigue Properties of Directionally Solidified Alloy IC10

Control of Microstructure and Properties of Welded Joints of Heavy Structures of Low Alloy High Strength Steels

Effects of Mixed Mode Loading Conditions on Fatigue Crack Growth Rate

Fundamental Research on Gasification Dephosphorization with Coke Powder Reducing Converter Molten Slag

Experiments and Regression Analysis of Grinding Hardened Layer Depth Based on Transverse Feed

Throughput Estimation Model of Cluster Tool in Semiconductor Manufacturing

An Intelligent Optimization System for PIM Process

Formation of Feed-Direction Burr in Axial Vibration Drilling

Main Features of High Speed Machining Chucks and their Selection

Failure Observation of 3D-Printed Thrust Bearing Specimens with Inner Defects in Water Conditions

Welding Repair of High Chromium Cast Iron Defects

Research on Base Welding Technology of Alkaline Welding Rod with Arc Method

New Low Alloy High Strength Steel Welding Procedure Evaluation.

Study on Welding Technology of Low Alloy High Strength Steel

Study on Fatigue Life of Straight Hole Plate of Directionally Solidified Alloy IC10

Study on Particle Modified ABS in 3D Printing

Effect of Different Aging System on Microstructure and Mechanical Properties of X2A66 Alloy

Optimization of Precipitation Phase Type and Mechanical Properties of X2A66 Alloy by Pre-Deformation Treatment

Study on Fatigue Properties of Copper Alloy Netting Structure

Chapter 4: Measurements and Modeling of Materials Properties and Materials Behavior

Evaluation of Wickability of Quick Dry Inner Wear

A Study of Wickability of Gauze Products for Infant

Synthesis and Clay Anti-Swelling Properties of Diethyl Dodecyl Allyl Ammonium Chloride

Microstructure Investigation of He+- Implanted and Post-Implantation-Annealed 4H-SiC

Thermal Management of a Li-Ion Battery for Electric Vehicles Using PCM and Water-Cooling Board

Observation of Tribological Fatigue Fracture on PEEK Shaft with Artificial Defect under One-Point Rolling Contact by Using 2.5D Layer Method

Multilayered Elastic Medium under Axisymmetric Loading and Surface Energy

Effect of Aspect Ratio on Horizontal Field Magnetoresistance

Observation of Crack Growth Behavior of 400μm Cracks in 4.762mm Silicon Nitride Balls under Cyclic Compressive Load

Effects of CeO2 Addition on Slip - Cast Yttria Tetragonal Zirconia Polycrystals Toughened Alumina (ZTA)

Chapter 5: Materials for Biomedical Application

Antibacterial Properties among Different Concentration of Bioactive Glasses

Comparison of Three Commercial Latex and Non-Latex Orthodontic Elastic Bands

Chemical Constituents of the Aerial Parts of Scoparia Dulcis and Anti-Cancer, Anti-Inflammatory Activities

Preparation, Characterization and Hemostatic Properties of Chitosan Caffeates.

Comparison of Mechanical Properties of Plain and Reversed Curve Nickel-Titanium Archwires

Shear Bond Strength of Experimental Light-Cured Orthodontic Adhesives

Chapter 6: Materials and Technologies for Construction

Effect of Shrinkage Reducing Admixture on Shrinkage and Crack Properties of Cement Based Materials

Water Resistance Modification of Magnesium Oxychloride Cement with H3PO4/Na2O·xSiO2·nH2O

Correlation between Unconfined Compressive Strength and Penetration Index Obtained from DCP Tests for Cemented Lateritic Soils

A Model for Bond Strength in Presence of Corrosion in Concrete

Effect of High Temperature Process on Microstructure and Properties of Industrial Steel Slag Cement

Experimental Study on Permanent Deformation of Fine Sandy Subgrade Filling in Coastal Region

Rebar Anchor Plate Research and Application

Evaluation on Sulfuric Acid Resistance of Concrete Protected by Biomimetic Coating Mortar

Axial Behavior of Columns Strengthened with Seismic RC Jacket Section

Chapter 7: Materials and Technologies for Chemical Production and Processing

Synthesis of Cerium Phosphate White Pigments from Cerium Oxalate

Desorption of Mercury Complex from Fe-Modified Montmorillonite Adsorbent Membrane

Ni0.75Fe0.25 Coated Tubular GDC Anode for Cathode-Supported IT-SOFC with High Anode Porosity

Congo Red Dye Removal Using Ca-Al Layered Double Hydroxide: Kinetics and Equilibrium

Effects of Extraction Conditions on Total Phenolic Content and Total Flavonoid Content of Roselle (Hibiscus sabdariffa L.) Extracts

Response Surface Methodology Optimization for Extraction of Natural Anthocyanins from Vietnamese Carissa сarandas L. Fruit

Microfluidic Chip Injection Photo Solidification Molding Study on Reaction Kinetics

Characterization and Photocatalytic Activity of Microspheres ZnO by Hydrothermal Method.

Synthesis of New Phosphate and the Evaluation as Scale Inhibitor in Oilfield

Modification of Ligustrum vulgare Leaves Extract as Eco-Friendly Corrosion Inhibitors in Oil Fields

Study on Source Analysis of the Cation in Produced Water from Sulige Gas Field and Anti-Scaling Measures

Preparation and Evaluation of Phosphate Scale Inhibitor for Oilfield Produced Water

Catalytic Cracking of Oleic Acid over Zeolites

Effect of Compatibilization on the Melt Properties of Mixed Waste Plastics

Effect of Extraction Process on Extraction Yeild, Total Polyphenol Content and Antioxidant Activity of Jasminum Subtriplinerve

Keyword Index

Author Index.

Notes:

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3488-7

OCLC:

1111980863