FarEastCon - material and construction. II, International Scientific Conference "FarEastCon ", 2019 : selected, peer reviewed papers from the International Scientific Conference (FarEastCon), October 1-4, 2019, Vladivostok, Russian Federation / edited by Denis B. Solovev.

Format:

Book

Contributor:

Solovev, Denis B., editor.

Series:

Materials science forum ; Volume 992.

Materials science forum ; Volume 992

Language:

English

Subjects (All):

Building materials--Congresses.

Building materials.

Physical Description:

1 online resource (1,059 pages).

Edition:

1st ed.

Place of Publication:

Switzerland : Scientific.Net, [2020]

Summary:

International Scientific Conference _FarEastCon_ 2019Selected, peer reviewed papers from the International Scientific Conference (FarEastCon), October 1-4, 2019, Vladivostok, Russian Federation.

Contents:

Intro

FarEastСon - Materials and Construction II

Preface

Table of Contents

Chapter 1: Construction Materials, Structures and Technologies

Effect of Electron Beam and Heat Treatment on the Reactivity of Aggregates and Mineral Additives towards Alkali-Silica Reaction in Portland Cement Compositions

The Effectiveness of Using Bitumen Emulsion in the Technology of Dedusting Roads with a Transitional Type of Coating

The Effect of the Level of Pouring the Mixture on the Basic Properties of Aerated Concrete with Variotropic Properties

Disperse-Reinforced Polystyrene Concrete Modified by Silica-Containing Additive

Technological Formation Features of the Lightweight Concrete Cellular Structure

Influence of Crumb Rubber Vulcanization Degree on the Quality of Asphalt Concrete Used in Road Construction

Research of Possibility of Application of Hot Tool Flare Welding for Polyethylene Gas Pipelines Construction

Study of the Thermophysical Characteristics of Steel Fiber Reinforced Concrete

Dome House Insulation Systems

Prospects for the Development of Building Ceramics Based on Clays and Nickel Slags of Orenburg Region

Influence of Class of Concrete on Oscillations of Thin-Wall Cylindrical Reinforced Concrete Shells

Insulation Systems of Frameless Buildings

Cullet-Filled Concrete

Study of the Transport Loads Influence on the Nature of Belite Sludge Hardening in Pavement

Phase Transformations in Cement Matrix at Low Temperatures

Influence of Ultrafine Addition Obtained from Pre-Hydrated Cement on Cement Paste

Mechanism of Interaction between Concrete Cement Matrix and Mineral Additive Particles

Improving the Efficiency of Slag Portland Cement by Reducing Shrinkage Deformations

Grip of Mature and Fresh Concrete with Heat Treatment in Winter Conditions.

Reinforcement of Ice Crossings with Geosynthetic Materials

High-Quality Cement-Mineral Suspensions Using Stone Crushing Waste

Studies of Heat Insulation Concrete

Experience of Using Self-Compacting Concrete Mixes in Transport Construction

Modified Composition for Fixing Sandy Soils

Experimental Investigation on Flexural Behavior of Cold Formed Beams with Lightweight Concrete

Fine-Grained Concrete with Nanodispersed Silica Additive

Improvement of Wood-Cement Composition Properties with Microsilica Additive

Effective Highly Dispersed Additive for Concretes on the Basis of Natural Mineral Raw Materials

Effect of Colloidal Silicon Dioxide on the Properties of Building Ceramics

The Method of Estimating the Durability of Structural Materials from the Effects of Cyclic Loads

How Formula and Technology Affect the Generation and Improvement in the Porous Structure of Foam Concrete

Work Head for 3D Printing of Insulated Walls from One-Stage Polystyrene Concrete

Features of the Formation of Properties of Stone-Mastic Asphalt Concrete Based on a Warm Polymer Modified Binder

Winter Concreting of Wall Fragments on Previously Constructed Floor Slabs with Unconventional Methods of Concrete Heat Treatment

Processing Methods Used to Create High-Quality Porous Structure of Aerated Concrete

Non-Autoclaved Aerated Concrete Porosity and Factors Affecting it

The Study of Cement Concrete with Improved Properties Based on the Use of Astivated Silica Fume

Influence of Carbon Nanomodifier on the Structure and Properties of the Modified Gypsum Binder

Improving the Bitumen Quality through the Comprehensive Polymer-Based Modification

Warm Asphalt Mixes Based on Polymer-Bitumen Binders

Influence of Thermally Processed Zeolite on Properties of Composite Gypsum Binder.

Ceramic Composition Material with Mullite Crystals Obtained from the Clayy Raw Material of Yakutia

Analysis of the Structure of Cellulose Fibers Using the Imagej Program and Fibercement Properties on their Basis

Firing of Cellular Ceramics from Granulated Foam-Glass

Processes of the Foaming Mixture' Components Interaction during the Foam Glass Synthesis

Activation of Diatomaceous Earth Low-Temperature Plasma

Chapter 2: Polymers and Composites

Study of the Impact Viscosity of the Epoxy Composite Modified Technical Carbon

Study of the Destructive Properties of Biodegradable Wood-Filled Composite Material

Technology of Production of Diamond-Abrasive Composites with Metal Matrix

The Study of Heat and Mass-Exchange Processes during the Drying of Granulate of Hydrophobic Polymers

Mechanical Properties of Superconcentrates Based on Ethylene-Vinyl Acetate Copolymer and Microcrystalline Cellulose

Synthesis of Poly(Ethylene 2,5-Furanoate): I. Kinetics of 2,5-Dimethyl Ester of Furandicarboxylic Acid Transesterification

Studies of Microwave Electromagnetic Field Influence on Adhesion Strength of the "Matrix-Fiber" Contact Zone on the Example of the Elementary Cell of a Certified Polymeric Composite Material

Studying the Effect of Temperature, Static Load and Nanodimensional Defects on the Mechanical Properties of Polyethylene Film at Uniaxial Extension

Destruction of Epoxy-Based Composite Materials under the Influence of Impact Load

Formation of the Structure and Properties of Epoxy-Based Composite Materials

Improving the Energy Efficiency of Autoclave Equipment by Optimizing the Technology of Manufacturing Parts from Polymer Composite Materials

Local Repair of Parts from Polymer Composite Material with the Use of Portable Hot Bonder Control Systems.

Investigation of the Effect of Mechanical Activation of Powder Components on the Properties of Polyimide Composites

About Communication of the Comparative Properties Plasticized PVC Compositions and Quantities of Additives Used

Thermophysical Properties of Syntactic Foams Based on Polymethylphenylsiloxane Resin and Hollow Glass Microspheres

Microstructure of Filled Biocomposites Based on Polyolefin Blends

Structure and Properties of Fibrous Materials Based on Poly(-3-Hydroxybutyrate)

High-Performance Polyesters: Synthesis, Characterization, and Properties of Poly(P-Oxybenzoate)

High-Performance Liquid Crystalline Polyesters: Influence of the Synthetic Pathway on the Thermal Properties

Analysis of Technological Capabilities and Peculiarities of Fuse Welding of Products Made of Metal-Matrix Composite Materials Based on Aluminum Alloy Produced by Internal Oxidation

Development of Multifunctional Composites Based on Ultrahigh Molecular Weight Polyethylene

The Effect of Radiation Sterilization on the Stress-Strain Properties of Non-Woven Materials -Based on Polypropylene

Investigation of the Climatic Stability of Sealing Rubbers Used in the Technology of the North

Regulation of Mechanical Properties of Advanced PCM Products with the Aid of Catalysts

Volume Distribution of Reinforce Particles in a Metal Matrix

Microwave Electromagnetic Field Influence on the Stability of Reinforced Carbon Plastics with Built-In Lightning Protective Coating during Dynamic Loads Action

Influence of Shungite Modificator on Technological Properties of Polymeric Glue Based on Urea-Formaldehyde Resin

Treated Textile Electrostatic Properties Study

Chapter 3: Steel and Alloys, Materials Processing Technologies

Friction Stir Welding in the Aircraft Production.

The Study of Heat Exchange Process between High-Temperature Liquid Metal Coolant and Liquid Steel during Crystallization

Research of 3D Printing Modes of Feedstock for Metal Injection Molding

The Effect of Yttrium on the Distributions of Elements in Different Phase Structures and Properties of Chromium White Cast Iron

Optimization of Technological Parameters of the Process for Obtaining a Strip by the Combined Method of Metal Casting and Deformation

Impact Toughness of Low Alloy Steels Subjected to Heat Treatment and Equal-Channel Angular Pressing at Low Temperature

Investigation of the Structure and Distribution of Chemical Elements between the Phases of Hard Alloys of the Cr3C2-Ti System, Obtained at Various Modes of Explosive Compaction

Kinetics of Phase Transformations in FeAl(Cr,Si) / Fe3Al(Cr,Si) / Fe(Al,Cr,Si) Laminated Coating on the Cr15Al5 Alloy

Development of Combined Machining Modes, Investigation of Mechanical Properties and Structure of Deformed Semi-Finished Products from Alloy 01417

Study of the Stress-Strain State of the Process of Drawing Wire from an Alloy of Palladium with Nickel

The Effect of Tungsten Nanoparticles on the Hardness of Sintered Sn-Cu-Co-W Alloys

The Regularities of Copper-Aluminum System Polymetallic Samples Manufacturing by the Additive Electron-Beam Technology

Welding of Cold-Resistant Micro-Alloed Steels 10HSNDA and 15HSNDA in the Atmosphere of Carbon Monoxide (II)

Development of Ultra-Fluid Compositions of Feedstock for Metal Injection Molding

AlpHaset Process and Molding Sands in Russia

The Effect of Cathode Surface Treatment on the Properties of Electrodeposited Copper Powders

Density and Surface Tension of Fe-Cu Melts

Analysis of Fractional Composition and Specific Surface of Silicone Dioxide Nanopowders.

Influence of the Salt Bath Deoxidation Degree on Change in Hard Alloys Properties during Heat Treatment.

Notes:

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3588-3

OCLC:

1193127938