Functional and functionally structured materials. III : Chinese materials conference 2018 (CMC 2018) : Chinese materials conference 2018 (CMC 2018) : selected, peer reviewed papers from the Chinese Materials Conference 2018 (CMC 2018), July 12-16, 2018, Xiamen City, Fujian, China / edited by Yafang Han.

Format:

Book

Contributor:

Han, Yafang, editor.

Series:

Materials Science Forum Series

Materials Science Forum Series ; v.Volume 944

Language:

English

Subjects (All):

Composite materials--Congresses.

Composite materials.

Physical Description:

1 online resource (1,291 pages)

Edition:

1st ed.

Place of Publication:

Zürich, Switzerland : Trans Tech Publications Ltd., [2019]

Summary:

Chinese Materials Conference 2018 (CMC 2018)Selected, peer reviewed papers from the Chinese Materials Conference 2018 (CMC 2018), July 12-16, 2018, Xiamen City, Fujian, China.

Contents:

Intro

Functional and Functionally Structured Materials III

Preface

Table of Contents

Chapter 1: Properties and Processing Technologies of Structural Alloys and Intermetallic Compounds

Effects of Solid Solution Temperature on Microstructure and Properties of Extruded and Forged FGH95 Superalloys

Creep Properties and Microstructural Evolution at 760°C/785MPa of a Re-Containing Single Crystal Superalloy

Thoughts on High Performance Superalloy Design and Microstructural Characteristics of a Newly Designed Ni-Cr-Co-W Superalloy Applied above 850°C

Microstructure-Dependent Deform Behavior of a Polycrystalline Ni-Based Superalloy Based on Micropillar Compression

Double Annealing Processes of Ti-5Al-5Mo-5V-1Cr-1Fe Titanium Alloy

Thermal Deformation Behavior and Critical Conditions of Dynamic Recrystallization of QCr0.8 Alloy

Effect of UDC Casting on Hot Deformation Behavior and Properties of 2A14 Aluminum Alloy

Numerical Simulation of Electromagnetic Phenomena and Solidification under a Pulsed Magnetic Field

Effects of Different Mold Temperature on Dendrite Morphology of Sn-Bi Alloy in Directional Solidification

Microstructure and Mechanical Properties of TiB2/ Al-Si Composites Fabricated by TIG Wire and Arc Additive Manufacturing

Effects of Hot-Rolled Process and Heat Treatment on Microstructure and Mechanical Properties of Ti-6Al-4V ELI Alloy

Effect of Preparation Process on Surface Quality and Microstructure of Titanium Sheet

Effect of Lubrication Conditions on the Forming Limit of Deep Drawing of 6061 Aluminum Alloy Sheet

Multi-Scale Microstructure Regulation Technology of Near-α High Temperature Titanium Alloy

Effect of Processing Techniques on the Mechanical Property of New Zirconium Alloy Strip.

Effect of Ultrasonic Impact Treatment on the Residual Stress Distribution of Electron Beam Welded TA15/BTi-6431S Dissimilar Titanium Alloys

Influence Mechanism of Cu on High Temperature Oxidation Behavior of Titanium Alloys

Fatigue Crack Growth Behaviors in Novel TC32 Titanium Alloy with Bimodal and Basket-Wave Microstructures

Combustion Microstructures and Frictional Ignition Resistance of Ti-6Al-4V Titanium Alloy

High Temperature Deformation Behavior in the Isothermal Compression of Ti-5Al-4Mo-2Cr-4Zr-2Sn-1Fe Alloy

Influence of Different Surface Treatments on Fatigue Life of 7050 Al Alloy

Thermodynamic Study on Equilibrium Phases in Nickel-Base Single Crystal Superalloys

Numerical Simulation of Dendrite Growth and Micro Segregation of Ni-Cu Alloy

High Compressibility ZrTiHfV0.5Nb0.5CX Refractory High-Entropy Alloys

Phase Stability and Mechanical Properties of FCC Structural CoCrCu0.5FeNi High-Entropy Alloy with Silicon or Boron Addition

Interfacial Reaction of CoCrFeNi High Entropy Alloy in Molten Al

Selective Laser Melting of Multi-Principal NiCrWFeTi Alloy: Processing, Microstructure and Performance

Chapter 2: Properties and Processing Technologies of Steels and Structural Metals

Influence of Cold Rolling Reduction on Microstructure and Mechanical Properties in 204C2 Austenitic Stainless Steel

Effect of Primary Annealing Temperature on Primary and Secondary Recrystallization in Strip-Cast Grain-Oriented Silicon Steel

The Effects of Current Density on Microstructure and Properties of Electrolytic Copper Foils

High-Precision Section Control Technology for High-Strength Yoke Steel Strip

Effect of Annealing Treatment on Microstructure, Mechanical and Damping Properties of Ductile Iron

Evolution of Grain Boundary Character Distribution in Pure Copper during Low-Strain Thermomechanical Processing.

Optimization Technology of Roll Contours during Skin-Pass Rolling Process of Hot-Rolled Strip

Physical Modeling of Flow Stress during the Hot Deformation of Nb Steels

Microscopic Failure Mechanism of Zinc Layer in Galvanized Sheet during Sheet Forming Process

Hot Ductility Behavior of 9SiCr Alloy Tool Steel by Thin Slab Casting

Effect of Hot Rolling Process Parameters on Microstructure Transformation and Microstructure of 45MnSiV Steel

Study on Continuous Cooling Transformation and Microstructure of 500 Mpa Grade Steel for Railway Freight Car Body

Microstructure and Mechanical Properties of Ferritic Rolling Low Carbon Steel

Effect of Process Parameters on Microstructure and Properties of 1500 MPa Grade Hot Formed Steel without Boron but Containing Niobium

Causes and Control Mechanism of Abnormal Structure in the Center of SWRH82B Wire-Rod-Steel

Continuous Cooling Phase Transformation Rule of 20CrMnTi Low-Carbon Alloy Steel

Solution Treatment of 20LH5 Chromium-Manganese Austenitic Stainless Steel

Titanium Nitride and Niobium Carbide in the Ferritic Stainless Steel and the Influence to Casting Macrostructure

Simulation Experimental Study on Ferrite Rolling Process of Low-Carbon Steels

Effect of Annealing Processes on Microstructures and Mechanical Properties of Medium Mn Steel

Achievements of Endless Strip Production in Rizhao Steel

Optimization of Quenching Process Parameters of 15CrNiMo Steel Used for Roller Bit Bits

Effect of Austenitizing Temperature on the Quenching Microstructure and Properties of 51CrV4

Effect of Rare Earth Elements on the Inclusion Behavior in Low Alloy Structural Steel

Effect of Heat Treatment on the Precipitation Behavior and Hardness of the Second Phase of 0Cr21Mn17Mo3N0.8 High Nitrogen Alloys.

Study of Helium Bubble Induced Hardening in BCC-Fe by Molecular Dynamics Simulation

Chapter 3: Surface Engineering and Wear Resistance of Machine Parts

Relationship between Corrosion Resistance and Microstructure of Copper-Nickel Alloy Pipes in Marine Engineering

Corrosion Behavior and Mechanism of Heat-Resistant Steel T91 in High-Temperature Carbon Dioxide Environment

Analysis of Transverse Cracks Forming in a Railway Axle

Service Temperature Evaluation of Cast K465 Superalloy Turbine Vane Based on Microstructural Evolution

Effects of Gas Film Hole on Mechanical Property and Oxidative Damage of Turbine Blades

Fractal Characterization of Relative Movement Modes in Simulated Friction and Wear Tests

Anti-Oxidation Performance on Graphite Prepared by Plasma Electrolysis Technology

Typical Failure Forms and Cause Analysis of High Speed Railway Wheels

Microstructure and Mechanical Properties of Aluminum Alloy/High Strength Steel Double Beam Laser Deep Penetration Welded Joint

Effect of LBE Corrosion on Surface Wettability of Ti3SiC2 at 450°C

Effect of Precipitate on Thermal Aging Effect of 17-4PH Martensitic Stainless Steel Used as Valve Stem in Nuclear Power Plant

Technology and Antimicrobial Properties of Cu/TiB2 Composite Coating on 304 Steel Surface Prepared by Laser Cladding

Corrosion Behavior and Oxide Films of New Zirconium Cladding Corroded at Different Conditions

Effect of Final Annealing Temperature on Corrosion Resistance of SZA-6 Zirconium Alloy Cladding Tubes

Formation and Properties of Fe-Based Amorphous/Nanocrystalline Alloy Coating Prepared by Wire Arc Spraying Process

Chapter 4: Nanomaterials and Advanced Functional Materials

Properties of PP Wood-Plastic Composites with Biocompatibility Additives

Preparation and Properties of Reflective Heating Polyethylene Terephthalate Fiber.

Effect on Properties of Corn Straw Fibers Reinforced Polypropylene Composites

Crystal Structure and Multiferroic Behaviors of Solid Solution (1-y)BiFe(1-x)MnxO3-yBaTiO3

Effect of SiC Additions on Microstructure Evolution and Mechanical Properties of W-Based Composite Prepared by Arc-Melting

Tough Hydrogels Based on Macromicelles as Crosslinkers with pH and Ion Sensitive Properties

Continuous Fabrication of Temperature-Responsive Hydrogel Fibers with Bilayer Structure by Microfluidic Spinning

The Bending Behavior of Porous Titanium Manufactured Using a Novel Spherical Space Holder

Preparation and Characterization of pH Responsive Complex Micelles with Dynamic Boronate Cross-Linking

Deformation and Residual Stress Measurement of Alumina Ceramics after Dynamic Impacts

Microstructures and Properties of Spinning for Silicon Carbide Particle Reinforced Aluminum Composite

Laser-MIG Hybrid Keyhole Welded 6mm Steel/Aluminum Butt Joints

Joints Properties of Aluminum Foams/Aluminum Plate by Transient Liquid Phase Bonding Process

Effect of the Gamma-Ray Irradiation on the Properties of an Epoxy Encapsulant

Defect Engineering in Antimony Telluride Phase-Change Materials

Activation Process and Mechanism of ZrCoCe Getter Films

Preparation and Characterization of Ni/ZrCoCe Stack Getter Films

Magnetic Anisotropy in [Pt/Co]4/MgO/[Co/Pt]2 Multilayers

Characterization and Mechanism Analysis of Growth Bands in Chemical Vapor Deposited ZnS

Development and Potential Application of Advanced Functional Materials in the Oil Field

Preparation of Porous CoS2 Nanostructures for Highly Efficient Electrocatalytic Hydrogen Evolution

Micromorphology and Characterization of V2O3 Nanoparticles Produced by the Liquid Phase Reduction-Heat Treatment.

A Strategy to Improve O2 Gas Response of La-SnO2 Nanofibers Based Sensor through Temperature Modulation.

Notes:

Includes index.

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3384-8

OCLC:

1086375643