Advanced materials and manufacturing processes for strategic sectors : selected, peer reviewed papers from the International Conference on Advanced Materials and Manufacturing Processes for Strategic Sectors (ICAMPS 2015), May 13-15, 2015, Trivandrum, India / edited by P. Ramesh Narayanan and S. V. S. Narayana Murty.

Format:

Book

Contributor:

Narayanan, P. Ramesh, editor.

Murty, S. V. S. Narayana, editor.

Series:

Materials Science Forum

Materials Science Forum ; v.830-831

Language:

English

Subjects (All):

Materials science--Congresses.

Materials science.

Physical Description:

1 online resource (742 p.)

Edition:

1st ed.

Distribution:

Enfield, New Hampshire : Trans Tech Publications Inc, [date of distribution not identified]

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications Ltd, 2015.

Summary:

Selected, peer reviewed papers from the International Conference on Advanced Materials and Manufacturing Processes for Strategic Sectors (ICAMPS 2015), May 13-15, 2015, Trivandrum, India.

Contents:

Intro

Advanced Materials and Manufacturing Processes for Strategic Sectors

Preface, Committees and Sponsors

Table of Contents

Chapter 1: Developments in Materials Processing Technologies

Development of Titanium Alloy Hemispherical Forging for Pressure Vessel of Launch Vehicle

Grain Refinement in the Magnesium Alloy ZK60 During Multi-Step Isothermal Forging

Centrifugal Casting and Characterisation of Primary Silicon and Mg2Si Dispersed Aluminium Functionally Graded Materials

Development and Characterization of 15Cr-5Ni-1W Martensitic Precipitation Hardening Stainless Steel for Aerospace Applications

Development of Hot Isostatic Pressing Technology for Investment Cast Products

Development of High Nitrogen Stainless Steel for Cryogenic Applications

Development of Thin Walled A-356 Components by New Rheocasting Semi-Solid Metal Processing Technology (NRC)

Processing and Characterization of Superinvar for Space Application

The Effect of Magnesium on the Modifying Efficiency of Strontium in A356 Alloy

Processing and Characterization of Inconel 625 Nickel Base Superalloy

Experimental Study on the Effect of Mechanical Stirring in Semisolid Processing of Aluminum Alloys at Thixo-Temperatures

Computer Simulation of Low Pressure Casting Process Using Flow 3DTM

Quantitative Feeder Design for Metal Castings

Computer Simulation of Centrifugal Casting Process Using FLOW-3D

Chapter 2: Powder Metallurgical Processing

Synthesis and Characterization of Nanostructured Tungsten-30 Atomic % Chromium Produced by Mechanical Attrition and Hydrogen Sintering

Effect of Equal Channel Angular Pressing on Densification Behavior of Al 5083 Alloy Powder

AlN-TiB2 Based Self-Lubricating Ceramic Insert Fabricated by Spark Plasma Sintering for Dry Turning Applications.

The Influence of Microwave Sintering on the Tribological Performance of Powder Metallurgy Based Aluminum Cenospheres Composites

Use of Cenosphere for Making Metal-Microspheres Syntactic Foam through Powder Metallurgy Route

Chapter 3: Manufacturing and Processing Techniques

Abrasive Water Jet Machining of Aluminum-Silicon Carbide Particulate Metal Matrix Composites

Effect of hBN Solid Lubricant Concentration on Machinability of Titanium (Ti-6Al-4V) Alloy

Analysis of Machining Parameter and Surface Finish of Al-Si Alloys with Grain Refiners and/or Modifier

Design for Manufacturing &amp

Assembly Approach in Realisation of Cryogenic Thrust Chamber

Manufacturability of Aircraft Winglet for Wind Tunnel Testing

Numerical Simulation of Magnetic Field-Assisted Material Removal in Micro-EDM

Multi-Point Injection Minimum Quantity Lubrication Machining

Machining of Thin Walls and Thin Floor Aerospace Components Made of Aluminum Alloy with High Aspect Ratio

A Review of the Effect of Process Parameters on the Performance of Plastic Injection Molding Process to Control the Warpage in Plastics

Chapter 4: Heat Treatment and other Thermal Technologies

Effect of Cooling Medium on Solution Treatment Response of Titanium Alloy Ti-5Al-5V-2Mo

Effect of Reversion Heat Treatment on the Mechanical Properties of Thermally Embrittled UNS S32760 Duplex Stainless Steel

Effects of Heat Treatment on the Tensile Properties of Flow-Formed AA6082 Aluminum Alloy Tube

Heat Treatment of Friction Surfaced Steel-Aluminum Couple

Heat Treatment Studies on 50CrV4 Spring Steel

Hot Dip Aluminizing of 9Cr-1Mo Steels and their Heat Treatment

Optimization of Aging Cycle of Stainless Maraging Steel Using Dilatometric and Differential Scanning Calorimetric Analysis to Improve its Strength.

Thermo Mechanical Working and Heat Treatment Studies on Meta-Stable Beta Titanium Alloy (Ti15V3Al3Sn3Cr) Plates

Wetting Kinetics and Cooling Performance of PAG Polymer Quenchants

Assessment of Wetting Kinematics and Cooling Performance of Select Vegetable Oils and Mineral-Vegetable Oil Blend Quench Media

Effect of Heat Treatment on the Microstructure of Gravity Cast and Squeeze Cast Al-Si-Mg Alloy

Effect of Heat Treatment on the Mechanical Properties of Copper-Beryllium Alloy (C17200)

Heat Transfer during Immersion Quenching in MWCNT Nanofluids

Effect of Annealing on Hardness Penetration of Caliber Rolled Mg-3Al-1Zn (AZ31) Alloy

Effect of Post Weld Heat Treatment on Mechanical Properties of 17-4-PH Stainless Steel Welds

Chapter 5: Testing and Analysis of Mechanical Properties

Axial and Bending Fatigue Testing of AISI 304 L Plumbing Tubes Used for Launch Vehicles Control System

Application of Small Punch Test to Evaluate Tensile Properties of SA213T22 Grade Boiler Steel

Evaluation of Elastic Properties of CP Ti by Three Different Techniques

Creep-Rupture Behavior of SUS 304H - IN 617 Dissimilar Metal Welds for AUSC Boiler Applications

On the Measurement of Dynamic Elastic and Internal Friction Properties of Nickel Based Super Alloys up to 650°C Temperature

Studies on Mechanical Properties of Ti-6Al-4V ELI at Liquid Hydrogen Temperature

Thermo Mechanical Fatigue Testing of GTD 111 Superalloy for Use in Gas Turbine Blades

Wettability and Bond Shear Strength of Sn-9Zn Lead-Free Solder Alloy Reflowed on Copper Substrate

Evaluation of Mechanical Properties of the Rocket Thrust Chamber Material under Flight Conditions

Static and Localized Strain Analysis of High Hardened Linear Model Mock-Up Bearing for Fast Breeder Reactor.

On the Anomalous Coffin-Manson Behavior Observed under Elevated Temperature Ratcheting in Type 316LN SS

Effect of Microalloying Elements on Mechanical Properties in the High Strength Low Alloy Steel

Compressive Behaviour of Al-Si-Mg/SiCP Foams

Effect of Bending Strain in Forming Limit Strain and Stress of IN-718 Sheet Metal

Material Characterisation and Constitutive Modelling of a Copper Alloy and Stainless Steel at Cryogenic and Elevated Temperatures

Chapter 6: Materials Joining

Effect of EBW Parameters on Weldment Quality of Ti6Al4V Alloy

Effect of Varying Process Parameters on the Microstructure and Mechanical Properties of Cu-Cr-Zr-Ti Alloy Brazed Using Cu-Mn-Ni-Sn-Fe Foil

Characterization of Electron Beam Weld Joints of Alpha-Beta Titanium Alloys for Cryogenic Applications

Experimental Investigation and Micro-Structure Study of Interface of Explosive Welded SS304 and AA6061 Plates

Solder Joint Reliability of Sn-Cu and Sn-Ag-Cu Lead-Free Solder Alloys Solidified on Copper Substrates with Different Surface Roughnesses

Structure and Hardness of Friction Stir Welds out of High-Strength Non-Heat Hardenable Cast and Wrought Aluminum Alloys

Studies on Friction Stir Welding of Al-Cu-Li (AA2195) Alloy

Study on Dissimilar Butt Joining of Aluminum Alloy, AA5052 and High Strength Low Alloy Steel through a Modified FSW Process

Vacuum Brazing of Molybdenum - Kovar and Evaluation of its Joint Strength

Wetting Kinetics and Joint Strength of Sn-0.3Ag-0.7Cu Lead-Free Solder Alloy on Copper Substrate as a Function of Reflow Time

Prediction of Temperature Profile in the HAZ of Maraging Steel GTAW Weldments

Modelling and Simulation of Temperature and Stress Analysis in TIG Welding Process

Influence of Filler Wire Material on Dissimilar Welding of 15-5PH to KC20WN (Haynes 25).

Experimental Study on the Effect of Tool Pin Profile on Aluminium AA6063 Friction Stir Welded Butt Joint

Explosive Welding of SS304 and Al6061 Using Copper as Interlayer - Development of Trial Methodology and its Optimisation

Effect of Brazing and Heat Treatment Cycle on the Mechanical Properties of Base Materials

Effect of Cooling Rate on Mechanical and Microstructural Characterization of Friction Stir Welded 316 L Austenitic Stainless Steel Joints

Chapter 7: Materials Characterisation

Assessment of Latent Heat and Solid Fraction of Al-22Si Alloy Using Newtonian and Fourier Analysis Techniques

Characterization of Hot Workability of Boron-Added Modified 9Cr-1Mo Steel (P91B) Using Dynamic Materials Model

Determination of Instability in Zr-2.5Nb-0.5Cu Using Lyapunov Function

Dry Sliding Wear Behavior of Ti-6Al-4V Alloy

Effect of Grain Size on Deformation Twinning Behavior of Ti6Al4V Alloy

Investigation of High Temperature Compatibility between Ferroboron and 9Cr-Based Ferritic Steel towards the Development of Indigenous Shield Material for Fast Reactor Applications

Microstructure and Superplasticity of an Al-Mg-Sc-Zr Alloy Processed by ECAP and Subsequent Cold Rolling

Microstructure Mapping: An Approach to Quantitative Interpretation of Microstructural Evolution in Indian Fast Reactor Advanced Clad Material during Hot Forging

Microstructure Control and Mechanical Property Correlation in Titanium Alloy Ti-6Al-4V Fasteners for Space Applications

Study of Microstructure and Wear Behavior of T6 Heat Treated as Cast Al-25Mg2Si-2Cu Alloy

Study on Orange Peel Phenomena in Cu-Cr-Zr-Ti Alloy Thrust Chamber

Thermal Expansion Behaviour of Inconel-690 by In Situ High Temperature X-Ray Diffraction

Electron Microscopic Study of Nodules Formed during Electrodeposition of Copper on Aluminium.

Effect of Sb, Sn and Pb Additions on the Microstructure and Mechanical Properties of AZ91 Alloy.

Notes:

Includes indexes.

Description based on online resource; title from PDF title page (ebrary, viewed September 26, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0006-0

OCLC:

958543266