Recent trends in power engineering : selected, peer reviewed papers from the 2015 9th International Power Engineering and Optimization Conference (PEOCO 2015), March 18-19, 2015, Melaka, Malaysia / edited by Ismail Musirin and Shahril Irwan Sulaiman.

Format:

Book

Contributor:

Musirin, Ismail, editor.

Sulaiman, Shahril Irwan, editor.

Series:

Applied mechanics and materials ; Volume 785.

Applied Mechanics and Materials, 1660-9336 ; Volume 785

Language:

English

Subjects (All):

Power (Mechanics)--Congresses.

Power (Mechanics).

Physical Description:

1 online resource (764 p.)

Edition:

1st ed.

Distribution:

Enfield, New Hampshire : Trans Tech Publications Inc, [date of distribution not identified]

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications Ltd, 2015.

Summary:

Selected, peer reviewed papers from the 2015 9th International Power Engineering and Optimization Conference (PEOCO 2015), March 18-19, 2015, Melaka, Malaysia.

Contents:

Intro

Recent Trends in Power Engineering

Preface and Committee

Table of Contents

Chapter 1: Applications of Artificial Intelligence in Power Engineering

Comparison of EPSO, PSO and EP Approaches in Transmission Loss Minimization in Power System Network

Optimum Substation Placement and Feeder Routing Using GA-MST

Short Term Electric Load Forecasting with Back Propagation Neural Network and Simulated Annealing Genetic Algorithm

A Comprehensive Study of Improved Evolutionary Particle Swarm Optimization (IEPSO) for Network Reconfiguration with DGs Sizing Concurrently

Cuckoo Search Algorithm in Loss Minimization via Capacitor Placement in Distribution System

Artificial Intelligence Based Technique for the Classification of Incipient Faults in Power Transformer

Multi-Objective Optimization for Sizing of Distributed Generation Using Cuckoo Search Algorithm

Application of Artificial Bee Colony Algorithm for Distribution Network Reconfiguration

Prediction of Undervoltage Load Shedding Using Quantum-Inspired Evolutionary Programming-Support Vector Machine

Artificial Neural Network Application in Optimal Coordination of Directional Overcurrent Protective Relays in Electrical Mesh Distribution Network

One-Hour Ahead Load Forecasting Based on Wavelet Neural Networks

Two Stage Optimal Capacitors Placement and Sizing Using Differential Evolution Particle Swarm Optimization

Structural Learning of Boltzmann Machine and its Application

Clustering Techniques in Load Characteristic Analysis

Load Flow Analysis Using Second-Order Load Flow Methods and its Variations

Ant Colony Optimization Technique in Optimal Capacitor Placement and Sizing Problem in Unbalanced Electrical Distribution System

The Improved of BFOA for Ensuring the Sustainable Economic Dispatch.

Chapter 2: Electrical Drives and Power Electronics

Neutral Point Type Buck-Boost Converter Circuit Application for Wireless Energy Transfer

Charge Balancing Control for an Asymmetric Multilevel Inverter with Multiple Paired-H-Bridges

Design and Implementation of LLC Resonant Converter for Photovoltaic Battery Charging Application

A dsPIC Microcontroller Based System Identification of Positive Output Buck Boost Converter for Module Mismatch Application

Asymmetric Cascaded DC Sources Multilevel Inverter with Less Active Switches and Simpler Control Strategy

The Impacts of the Disturbances for the Hybrid Fuzzy-Fuzzy Controller Applied to Induction Motor Drive

Selective Harmonic Elimination Method for Cascaded H-Bridge Multilevel Inverter

Analysis of Changes in Temperature and Irradiance to DC-DC Buck Converter Based on IP Controller for Solar Power Plant Application

Modelling and Simulation an AC-DC Rectifier Circuit Based on Piezoelectric Vibration Sensor for Energy Harvesting System

Design Study of Zero Voltage Switching for DC/DC Boost Converter

Design and Analysis of a Digital Controller for Boost Converter with Renewable Energy Sources for Domestic DC Load

Performance Development of Space Vector Pulse Width Modulation for Induction Motor Drive Using Artificial Intelligence

Modeling and Simulation of Power Electronic Distribution Transformer Based on a Three Level Converter

Alternative Solar-Battery Charge Controller to Improve System Efficiency

A New Controller Scheme for Seven-Level Cascade Multilevel Converter Based Shunt Active Power Filter

Impact of Inverter Controller on Efficiency and Islanding of Photovoltaic Distributed Generation

Application of Robust Control on Arduino Microcontroller Testing in Power Electronics Converters.

Single-Phase Single Stage String Inverter for Grid Connected Photovoltaic System

Three-Phase Asymmetric Multilevel Inverter Topologies with Better Charge Balancing

Comparison between PSO and FLC: MPPT for Energy Harvesting of PV System under Partial Shading Condition

Comparison between Takagi Sugeno FIS and PI Controller: An Adaptation Scheme of MRAS for Speed Sensorless Control of PMSM

Simulation and Practical Analysis on Power Factor Correction Techniques for Welding Applications

50 cm Air Gap Wireless Power Transfer by Magnetic Resonance Coupling

Performance Comparison of VSI Switches Faults Analysis Using STFT and S Transform

Performance Evaluation of Various Adaptive Neuro Fuzzy Inference System Based Maximum Power Point Tracking for Photovoltaic System

Investigation of Shading Characteristics of Mono-Crystalline and Poly-Crystalline Photovoltaic Modules Connected in Series

DC Loads Matching Technique as an Alternative to AC Inverter in Residential Solar System Application Evaluation and Comparison

Optimization of Sun-Tracker Positioning Using Takagi-Sugeno Fuzzy-Logic Method

Online Monitoring System for Domestic Distribution Box

Chapter 3: Electrical Machines and Apparatus

Performance Analysis of Brushless DC Motor Drive for Air Conditioner

Efficiency Comparison of Trapezoidal and Sinusoidal Method for Brushless DC Motor Drive

Investigating the Impact of Distributed Generators Power Factor to Simultaneous Optimization Analysis

Modeling and Analysis of Linear Permanent Magnet Generator for Wave Energy Conversion Using Finite Element Method

Influence of Leading Design Parameters on the Performance of a T-Shaped Permanent Magnet Tubular Linear Motor

Simulation Study on HST Distribution for ONAN Oil-Filled Transformer.

2D-FEA Based Design Study of Salient Rotor Three-Phase Permanent Magnet Flux Switching Machine with Concentrated Winding

Regenerative Braking of Electric Vehicle with Brushless DC Motor

Design and Improvement of 12S-14P Hybrid Excitation Flux Switching Machine with Field Excitation Coil in Radial Direction

Loading Performances of Low-Power Low-Speed Single-Phase Induction Generator with Energy Saving Lamps

Improved Design of Three Phase Hybrid Excitation Flux Switching Motor with Segmental Rotor

Design and Modelling of a Portable Pico Linear Generator for Wave Energy Conversion System

Design Optimization of Single Phase, Tubular, Linear Permanent Magnet Generator for Wave Energy Conversion System

A Performance Comparison of Three Micro-Sized Blade Rotor Designs for Malaysia Wind Speed Condition

Viscosity Reduction of Palm Oil via Ultrasonic Radiation

Behavior of Biodegradable Oil under Impulse Voltages

Application of PDC Analysis to Identify Effect of Electrical Tracking on Conductivity of LLDPE-NR Nanocomposite

Chapter 4: Quality and Reliability of Power, Protection and Electromagnetic Compatibility in Power Systems

Classification of Circuit Breaker Condition Based on Trip Coil Signature Analysis

Partial Discharge Pulse Propagation and Attenuation in Power Cable Insulation: Simulation in Finite Element Method

Improvisation on Standard Limit of the Critical Clearing Time Specified for the Protection Relays Using one Machine Infinite Bus Equivalent

Analysis of Leakage Current on 11kV Zinc Oxide Surge Arrester Using Finite Element Method

A Novel of Fault Localization Method to Determine Fault Distance for Single Line to Ground Fault in the Distribution Network

Adaptive Distance Protection to Prevent False Relay Tripping during Power Swing.

A Review on DSTATCOM Neural Network Control Algorithm for Power Quality Improvement

Classification of Power Quality Disturbance Based on Continuous S-Transform-Windowing Technique (CST-WT) and ANOVA as a Feature Selection

Simulation of Power Quality Disturbances Using PSCAD

Estimation of Power System Harmonic Using Modified Normalized Least Mean Square

Surface Discharge Characteristics on HDPE, LDPE and PP

The Impact of Synchronous Distributed Generation (DG) on Distribution System

Maximum Loadability Identification Using Self-Tuning Algorithm Considering Voltage Limit

Modified Novel Line Stability Factor Index with Reactive Power Tracing for Identification of Vulnerable Buses in Power System

Injection Impact of Photovoltaic Distributed Generations (PVDG) on Power Distribution System Stability

Proposed on Transformer-Less Dynamic Voltage Restorer

Constrained Reactive Power Control (CRPC) Based Multi-Objective Optimization under Multi-Contingencies (N-m)

A Design of an Automatic Single Phase Power Factor Controller by Using Arduino Uno Rev-3

Bijective Differential Search Algorithm for Robust Design of Damping Controller in Multimachine Power System

Optimization of Automatic Transformer Tap Changer Using Cascaded-Evolutionary Programming Technique

Total Harmonic Distortion Assessment of 17kWp Grid Connected Photovoltaic Systems

Comparison between the System Cascading Collapse Based Hidden Failure and Fault Chain Theory in the Determination of Sensitive Transmission Lines

Severe Total Loading Condition Attributed by a Significant Impact of Dynamic Power System Cascading Collapse

A Phase Shifting Technique for Harmonic Reduction in Modern Electrical Distribution Systems

Reactive Power Compensation in Oman 400kV Transmission System.

Fault Distance Calculation in Radial Distribution System Using Second Order Polynomial Analysis of Voltage Sag Profile.

Notes:

Includes indexes.

Description based on online resource; title from PDF title page (ebrary, viewed September 23, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-03826-982-4

OCLC:

958543325