Science and engineering 2015 : selected, peer reviewed papers from the International Conference "The Young for Science & Engineering 2015", November 5-6, 2015, Płock, Poland / edited by Anna Krawczynska-Piechna [and three others].

Format:

Book

Contributor:

Krawczynska-Piechna, Anna, editor.

Series:

Applied mechanics and materials ; Volume 797.

Applied Mechanics and Materials, 1662-7482 ; Volume 797

Language:

English

Subjects (All):

Materials--Congresses.

Materials.

Engineering--Congresses.

Engineering.

Physical Description:

1 online resource (431 p.)

Edition:

1st ed.

Place of Publication:

Pfaffikon, Switzerland : TTP, 2015.

Summary:

Selected, peer reviewed papers from the International Conference "The Young for Science & Engineering 2015", November 5-6, 2015, P_ock, Poland.

Contents:

Intro

Science and Engineering 2015

Preface, Organising Committee, Scientific Committee

Table of Contents

Chapter 1: Building Structures and Materials

Reduction in the Critical Moment for Lateral Torsional Buckling of Coped Beams

The Comparison of Methods of Assessing the Reliability of the Steel Frame

Application of FEM Mesh Generation Algorithm for Digital Processing of Handmade Sketches

Monte Carlo Simulation of the Torsional Strength due to Concrete Compression of Reinforced Concrete Element

Probabilistic Analysis of Shear Resistance due to Concrete Tension

Computational Analysis of Biaxial Bending in Reinforced Concrete Columns

Research on the Phenomenon of Relaxation of Compressed Concrete Elements

Generating Interaction Curve Graph Based on the Rotation Angle of Strain Diagram, According to EN 1992

Designing Compressed Reinforcement Cross-Sections by Curvature and Nominal Stiffness Methods

Research on Compresive Strength and Strain of Expansive Concrete

Calculation of Reinforced Concrete Beam Cross Sections According to General Method Included in EC2

Degradation Analysis of Notched Foam Concrete Beam

Application of TOPSIS Method in Formwork Selection Problem

Comparison of Steel Trusses Analysed with Different Types of Fire Curves

Conception of FEM Analysis Using Special Multi-Area Plane State of Stress Elements

Analysis of the High Buildings Structure

Simplified Numerical Modelling of a Blast Load Impact

Neural Approximation of the Buckling Coefficient of Compression Flange of Box Girder Evenly Loaded Transversely

Adhesion Assessment between Concrete Layers Using the Ultrasonic Pulse Velocity Method

Recycling of Concrete as the Direction of a Modern and Efficient Building.

The Effect of Adding Selected Nanoparticles on the Mechanical Properties of the Cement Matrix of Self-Compacting Concrete

Modified Protective Concrete

Optimized Thermal Performance Design of Filled Ceramic Masonry Blocks

Chapter 2: Energy Saving and Energy Efficiency in Civil Engineering

Analysis of Domestic Hot Water Production Efficiency for Detached Houses

A Neural Network Assisted On-Line Cleaning of Heat Exchanger Network

Influence of Solar Radiation and Ambient Temperature on the Unit Yield of a Photovoltaic System

Theoretic Assessment of Possibility of Leg Ventilation Duct in Thermal Insulation System of a Renovated Apartment Building

Chapter 3: Geotechnics

Design of the Pressurized Tepula Channel

Numerical Simulation of Subsoil Freezing Risk under the Freezer Room

Comparison of Methods Determining Particle Sphericity

Application of Fractal Geometry in the Evaluation of Surface Microtexture of Soil Particles

Comparison of Methods Determining the Angularity of Aggregate Particles

Chapter 4: Engineering Mechanics and Mechanical Engineering

Numerical Analysis of Shell-Side Fluid Flow in Shell-and-Tube Heat Exchanger

Experimental Data Acquisition System for Flow Boiling in Mini Channels

Comparison of Selected Meshless Methods for Analysis of Steady, Fully-Developed, Laminar Flow of an Incompressible Newtonian Fluid in Internally Finned Tubes

Vibration Transmission Loss of Auxetic Lattices

Comparative Analysis of Forms of Lateral Baffles for Road Tanks

Photographic Technique Application to the Determination of Void Fraction in Two-Phase Flow Boiling in Mini Channels

Finite Element Modelling of Contact Interaction between Spherical Indenter and Elastic-Plastic Body

The Behaviour of the Bed in Rotating Drum for Five Different Drum Diameters.

Study of Heat Transfer in Pneumatic Pulsator

Air Evacuation from the Pressure Accumulator during Work Cycle of the Pneumatic Pulsator

New Environmentally Friendly Solutions to Prevent Oil Pipelines Disasters

Chapter 5: Chemical Engineering

The Role of the Additive in the Form of Na2SO4 in the Epoxidation of Dialllyl Ether

Influence of Equivolumetric Mixture of Ethyl Levulinate and Fatty Acid Methyl Esters on Chosen Properties of Diesel Fuel

Synthesis of Ethyl Levulinate, a Perspective Biocomponent of Motor Fuels

Epoxidation of Natural Limonene over the Ti-MCM-41 Catalyst with 60 Wt.% Hydrogen Peroxide

The Application of Coagulation and Advanced Oxidation Processes Combined in the Treatment of Tar Water from Biomass Gasification

The Impact of the Structure of the Sampler on the Representativeness of LPG Samples

The Influence of Stretch Rod Speed on the Relationship between Preblown Bottle Aesthetic Quality and Final Blown Bottle Thickness Profile in Stretch Blow Molding from Preform Process

Synthesis and Characterization of Nickel Aluminate Spinel (NiAl2O4) Prepared from the Equilibrium Mixture of Al2O3 and NiO

The Size and Shape Analysis of Titanium Particles in Composites from ZrO2 - Ti System

The Effect of Leachant pH on the Level of Heavy Metals Release from Industrial Waste

Minimum Compressor Shaftwork in the Refrigeration System Thermally Coupled with a Rectification Column Network

Keywords Index

Authors Index.

Notes:

Includes indexes.

Description based on online resource; title from PDF title page (ebrary, viewed September 26, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0013-3

OCLC:

958547102