Materials Science and Technology VIII : selected, peer reviewed papers from the 8th International Conference on Materials Science and Technology (MSAT-8), December 15-16, 2014, Bangkok, Thailand / edited by Peerapong Pinwanich.

Format:

Book

Conference/Event

Contributor:

Pinwanich, Peerapong, editor.

Conference Name:

International Conference on Materials Science and Technology (8th : 2014 : Bangkok, Thailand)

Series:

Key engineering materials ; Volume 659.

Key Engineering Materials, 1013-9826 ; Volume 659

Language:

English

Subjects (All):

Materials science--Congresses.

Materials science.

Materials--Analysis--Congresses.

Materials.

Physical Description:

1 online resource (706 p.)

Edition:

1st ed.

Distribution:

Enfield, New Hampshire : Trans Tech Publications Inc., [date of distribution not identified]

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications Ltd, 2015.

Summary:

Selected, peer reviewed papers from the 8th International Conference on Materials Science and Technology (MSAT-8), December 15-16, 2014, Bangkok, Thailand.

Contents:

Intro

Materials Science and Technology VIII

Preface, Committees and Sponsors

Table of Contents

Chapter 1: Materials for Biomedical Application

In Vitro Resorbability of Three Different Processed Hydroxyapatite

Bleached Shellac as an Alternative Polymeric Matrix for In Situ Microparticle

Metrodidazole In Situ Forming Eudragit RS Gel Comprising Different Solvents

Physical and Mechanical Characterizations of Oxidized Regenerated Cellulose/Polycaprolactone Composite for Use as a Synthetic Dura Mater

Physical Properties of Xyloglucan/Bacterial Cellulose Composite Film Plasticized with Glycerol

Preparation and Characterization of Polymer Blends from Nang noi srisaket 1 Silk Fibroin, Gelatin and Chitosan Nanofiber Mats Using Formic Acid Solution

Sintered Titanium-Hydroxyapatite Composites as Artificial Bones

Synthesis and Characterization of Artificial Bone Material Using Calcium from a Natural Source

Properties of Deproteinized Natural Rubber Latex/Gelatinized Starch Blended Films

Chapter 2: Ceramic-Based Materials

Application of Statistical Analysis in the Powder Injection Molding (PIM) of Mullite

Composition-Microstructure-Property Relationships in BaTiO3 with Mg Addition

Compressive Strength in Various Submersion Tests of Fired Clay Bricks from Chi River Sub-Basin

Dispersion Stability of Drinking Water Treatment Sludge

Effect of Rice Husk and Rice Husk Ash on Properties of Lightweight Clay Bricks

Effect of Silica to Alumina Ratio on the Compressive Strength of Class C Fly Ash-Based Geopolymers

Effect of Sintering Additive and Pyrolysis Temperatures on Porous Silicon Carbide

Effects of Water Temperatures on Water-Soluble Binder Removal in Ceramic Materials Fabricated by Powder Injection Moulding

Electromechanical Displacement of Soft/Hard PZT Bi-Layer Composite Actuator.

Fabrication of Fiber Cement Using Tobacco Stalk Pulp from Agricultural Residue

Influence of Alkaline Concentration on Physical Properties of Porous Geopolymer Using Silica Fume as Foaming Agent

Influences of Inhibitor and Firing Temperature on Efflorescence Reduction of Clay Products

Microstructure and Properties of Zirconia Toughened Alumina Fabricated by Powder Injection Moulding

Morphology and Phase Composition of Sol-Gel Derived Aluminum Borate Nanowhiskers

Preparation and Characterization of Clays from Different Areas in Ban Bo Suak, Nan Province, Thailand

Preparation and Properties of PSZTM Ceramics with Different Methods

Properties of Sintered Brick Containing Lignite Bottom Ash Substitutions

Properties of Steel Fiber Reinforced Geopolymer

The Effect of Alumina/Glass Composite Composition on the Adhesion and Strength of a 96% Alumina Joint

The Effects of Solvents on the Solvothermal Synthesis of BiVO4 Photocatalyst Powders

The Effects of Water Removal Process on the Properties of Magnesium Aluminate Spinel Nanopowders Synthesized by Co-Precipitation Method

The Study of Physical and Thermal Conductivity Properties of Cement Paste Containing Nanosilica

Utilization of Glass Cutting Sludge and Sanitary Ware Sludge in Ceramic Pressed Bodies

Effect of Firing Temperature and Mo Doping on the Synthesis of Solar-Reflective Sm2Ce2O7 Yellow Pigment

Effect of Bi2O3 on Thermal Properties of Barium-Free Glass-Ceramic Sealants in the CaO-MgO-B2O3-Al2O3-SiO2 System

Figures of Merit of Low-Cost CuAl0.9Fe0.1O2 Thermoelectric Material Prepared at Different Solid State Reaction Sintering Temperatures

Study of the Hydrolytic Resistance of Glass Bottles under a High Fluctuated Weather Condition

The Effect of Heat Treatment on Fe2+/Fe3+ Ratio in Soda-Lime Silicate Glass.

Chapter 3: Materials and Technologies for Fuel Production

Comparison of Pyrolysis of Jatropha Cake with Different Catalysts Using PY-GC/MS

Cu/ZnO Catalysts for Enhancing the Methanol Selectivity in Fischer-Tropsch Synthesis

Effect of Gallium Loading on Reducibility and Dispersion of Copper-Based Catalyst

Natural Hydroxyapatite (NHAp) Derived from Pork Bone as a Renewable Catalyst for Biodiesel Production via Microwave Irradiation

Preparation of Co/SiO2-Al2O3 Fiber Catalyst by Electrospinning for Fischer-Tropsch Synthesis

Electrochemical Fabrication of Cu2O Photocathode for Photoelectrochemical Hydrogen Evolution Reaction

Visible Light Driven Photocatalytic Hydrogen Evolution by Lanthanum and Carbon-co-Doped NaTaO3 Photocatalyst

Utilization of Waste Enamel Venus Shell as Friendly Environmental Catalyst for Synthesis of Biodiesel

Total Energy Requirement for Hydrogen Production Reactor Using Various Porous Media Materials

The Effect of Ternary Catalyst Atomic Ratios (PtRuSn/C and PtRuNi/C) on Ethanol Electrooxidation for Direct Ethanol Fuel Cell

LPG Synthesis from Syngas over Cu/ZnO-Pd-β Catalysts Prepared by Ultrasonic Spray Pyrolysis

Chapter 4: Eco-Friendly Materials, Technology and Materials in Environmental Engineering

Gas-Sensing Properties of Pt-V2O5 Thin Films for Ethanol Detection

High Density Polyethylene Catalyst Waste as a Filler in Papermaking

Material Safety and Integrity of Water-Filled Low-Density Polyethylene Bags in an Accelerated Weathering Investigation for Applications in Solar Water Disinfection (SODIS)

Photocatalytic Degradation of Phenol by Impure BiFeO3 under Visible Light Irradiation

Pomelo (Citrus maxima) Peel-Inspired Property for Development of Eco-Friendly Loose-Fill Foam

Treatment of Textile Dyeing Wastewater by Electrocoagulation.

Effect of Crystallinity of Hydroxyapatite Nanoparticles Prepared from Bovine Bone on Adsorption of Ammonia Gas

Fabrication and Photocatalytic Degradation of TiO2/Porous Activated Carbon-Zeolite Composite Cylinder

Fabrication of Zeolite Na-A and Activated Carbon Composites by Slip Casting for Drinking Water Filtration

Forming of Zeolite/Carbon Composite Substrate Coated with Titania for Photocatalyst Decomposition of Organic Compound

Homogeneous Precipitation Synthesis and Sintering of Magnesium Aluminate Spinel Nanoparticles

Influence of Carbon Nanotubes on Photocatalytic Activities of Titanium Dioxide Nanocomposite Powders

Organic Based Heat Stabilizers for PVC: A Safer and more Environmentally Friendly Alternatives

Chapter 5: Steels, Metals, Alloys and Intermetallic Compounds

Fe-Sn Intermetallics Synthesized via Mechanical Alloying-Sintering and Mechanical Alloying-Thermal Spraying

Machined Surface Quality of Pre-Sintered Hardenable PM Steel

Microstructural and Phase Analysis of Service-Exposed Ni-Cr Alloy Turbine Blade

Sintered Frictional SiC-Reinforced Cu-Base Composites

Application of Numerical Method and Statistical Analysis in the Integrated Intensity Calculation of the Peaks from the X-Ray Diffraction (XRD) Pattern of α-Iron

Investigation of Fracture Location of T22/T91 Dissimilar Welds

Chapter 6: Polymers and Composites

Biaxially-Stretched Poly(Lactic) Acid (PLA) and Rubber-Toughened PLA Films: Tensile and Physical Properties

Characterizations of Fluorine-Containing Polybenzoxazine Prepared by Solventless Procedure

Characterizations of Silicon Carbide Whisker-Filled in Benzoxazine-Epoxy Shape Memory Polymers

Effect of Fiber Surface Modification on Properties of Artificial Leather from Leather Fiber Filled Natural Rubber Composites.

Effect of Particle Sizes on Film Formation Behavior of Hevea brasiliensis Natural Rubber Latex

Effect of Various Extracted Solvent on DPPH Radical Scavenging Activity of Natural Rubber

Effects of Particles Size of Nanosilica on Properties of Polybenzoxazine Nanocomposites

Fabrication and Application of Nanostructures Using Gas-Assisted Hot Embossing and Self-Assembled Nanospheres

Fabrication of Novel Polyhydroxybutyrate-co-Hydroxyvalerate (PHBV) Mixed with Natural Rubber Latex

Functionalization of Styrene-Butadiene Rubber and Skim Latex by Photo-Catalytic Reaction Using Nanometric TiO2 Film as a Photocatalyst

Improvement of Filler-Rubber Interaction by Grafting of Acrylamide onto Saponified Natural Rubber under Ultraviolet Radiation as a Continuous Process

Improvement of Structure and Properties of Nanocomposite Foams Based on Ethylene-Vinyl Acetate (EVA)/Natural Rubber (NR)/Nanoclay: Effect of NR Addition

Influence of Processing Oil Based on Modified Epoxidized Vegetable Oil with N-Phenyl-p-Phenylenediamine (PPD) on Extrusion Process Behaviors of Natural Rubber Compounds

In Situ Reinforcement of PLA Using Nylon 6 in PLA/Nylon 6 Extrudate Blend via Twin-Screw Extrusion

Investigation of Synthesis Parameters for Modification of Chitosan with Enrofloxacin

Mechanical and Thermal Properties of Hemp Fiber Reinforced High Density Polyethylene Composites

Mechanical and Thermal Properties of Silane Treated Pineapple Leaf Fiber Reinforced Polylactic Acid Composites

Mechanical Properties of All-Cellulose Composites Made from Pineapple Leaf Microfibers

More Values of L-Quebrachitol from Skim Natural Rubber Latex

Morphology and Mechanical Properties of Polyoxymethylene and Acrylonitrile-Butadiene-Styrene Blends with Compatibilizer.

Organomodified Clay and its Influence on Thermal and Fire Behaviors of Clay/Fire Retardant/Poly Vinyl Ester Composites.

Notes:

Includes indexes.

Description based on online resource; title from PDF title page (ebrary, viewed September 26, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0023-0

OCLC:

958543323