FarEastCon - Materials and Construction III.

Format:

Book

Author/Creator:

Solovev, Denis B.

Series:

Key Engineering Materials

Key Engineering Materials ; v.Volume 887

Language:

English

Subjects (All):

Materials science--Congresses.

Materials science.

Structural engineering--Congresses.

Structural engineering.

Physical Description:

1 online resource (729 pages)

Edition:

1st ed.

Place of Publication:

Zurich : Trans Tech Publications, Limited, 2021.

Summary:

Selected peer-reviewed full text papers from the International Scientific Conference "FarEastCon" 2020 Selected, peer-reviewed papers from the International Scientific Conference "FarEastCon" 2020 (FarEastСon-2020), October 6-9, 2020, Vladivostok, Russian Federation.

Contents:

Intro

FarEastCon - Materials and Construction III

Preface

Table of Contents

Chapter 1: Special and Functional Materials

Thermotropic Copolyesters Based on Polyethylene Terephthalate and 4-Hydroxybenzoic Acid for High Modulus Fibers

Influence of Microwave on the Structure and Properties of Nanomodified Fluoroplastic

Synthesis of 5-Hydroxymethylfurfural-Acetone Resins

Surface Carboxylation of a Boron-Carbon BC5 Nanotube in the Development of Sensor Devices

Special Features of Formation of the High Damping State in Bimetallic Structural Materials Obtained by Explosion Welding

Features of Glass Plate Hardening by the Ion Exchange Method

Development of Titanium Implants with a Rough Calcium Phosphate Surface to Control the Morphofunctional State of Stem Cells

Investigation of the Thermal State of Parts to Justify the Possibility of Additive Forming of Nitinol Blanks In Situ

Electrochemical Sensors Based on Noble Metal Nanoparticles in Voltammetry

Investigation of BaSO4-KPO3-Na2B4O7 Low-Melting Glass System as a Basis for Synthesis of a Glass-Solder Material

Visualization of the Effect of an Impurity on the Optical Homogeneity of Lithium Niobate Doped with Boron Cations

Chapter 2: Polymers and Composites

Obtaining of Composite Alloys Based on Nickel Aluminides with Rare Metals

Research Investigation of Deformation Characteristics of Thin Polymer Films at Different Doses of Electron Irradiation

The Mechanism of Getting New Composite Polymer Materials with Improved Hardness Properties

Thermal Decomposition Characteristics of Poly((4-Vinylbenzyl) Trimethylammonium Bis (Trifluoromethanesulfonimide)) Studied by Pyrolysis-GS / MS

Towards a Strategy for the Synthesis of Polymeric Ionic Liquids with a Bulk Anion in Various Reaction Media.

Development of Forming Method of Deployable Boom from Thermoplastic Polymer Composite

Effect of Wood Filler Concentration on Physical and Mechanical Properties of PLA-Based Composites

Investigation of the Staging of Damage Accumulation in Polymer Composite Materials during Bending and Tensile Tests

Oxidative Degradation of Polyethylene Filled with Nanosized Crushed Shells of Sea Oysters

Evaluation of the Influence of the Conditions of Catalytic Continuous Steam Explosive Activation of Wood on the Physical and Operational Properties of Wooded Composite Materials Based on Activated Fibers

Nanomodified Epoxy Materials with Improved Operating Characteristics

Physicochemical WPC Modification Techniques

Testing of Carbon Nanotubes and their Influence on the Physical and Mechanical Characteristics of Polyester Resin

Chapter 3: Materials and Technologies of Chemical Production

Fundamentally New Composite Materials of Fast Reactors Made on the Basis of Nanotechnology

Redox Behavior of Chelate Complexes Based on 8-Oxyquinoline Promising in OLED Display Technology

Purification of Zinc Oxide from Chlorides Using Microwave Radiation

Direct Synthesis of Titanium Nanoparticles by Induction Flow Levitation Technique

Polychelates Based on Magnesium, Aluminum, Iron, Zirconium, and Vanadyl Acetylacetonates - Synthesis, Structure and Properties

Optimization of the Choice of Technological Methods for Nanomodification of Natural Aluminosilicates through the Parameters of the Element-Oxygen Chemical Bond

Chapter 4: Properties and Processing Technologies of Steel and Alloys

Structure and Properties of Additive Hard Magnetic Alloys 25Cr15Co and Alnico

Microstructure-Impact Toughness Relationships in Quenched and Tempered Low Carbon Low Alloy Steels

Modern Technologies of Metal Processing in the Socio-Cultural Context.

Mechanical and Corrosion Properties of VT6 Titanium Alloy after Irradiation with Helium and Aluminum Lons

Investigation of the Effect of Implantation of Aluminum Alloys by Gas and Metal Ions on the Structure and Phase Composition of the Implanted Layer

Research of Properties of Austenitic Steels

Elasticity Modulus and Hardness of Bearing Steel after Laser Treatment

Amorphous Alloys Atomic Structure Investigation by Means of Electron Microscopy and Diffraction

Development of Combined Rolling-Extruding Modes for Producing Longish Deformed Semi-Finished Products from Aluminum Alloy with Low Cerium Content

Influence of Structure and Dispersivity of Copper on its Melting Features

Features of Structural-Phase Transformations during Oxidation of Metals with Bulk Submicrocrystalline Structure and Fine Metal Powders

Channel Angular Pressing of the Annular Metal Billet

Grinding of Titanium Alloys

Features of the Structure of the Material Formed from AK4-1 Powder Using Laser Energy

Experimental and Analytical Assessment of the Power Parameters of the Combined Rolling-Extruding Process Using a Round Billet from Alloy 01417 Obtained Using an Electromagnetic Mold

Chapter 5: Tribology, Coatings and Surface Engineering

Features of the Formation of Structure and Geometry during Direct Laser Deposition of 321L Stainless Steel on Complex Groove Using the LENS Method

Study of the Impact of Protective Process Agents with Carbon Nanopowder Additives on Chip Forming Processes

Kinetic Characteristics of Electrodeposition of Ni-Co-Al2O3 Composite Coating

Chemical Processes in PEO Coatings Formation and Destruction on Titanium Alloy VT-1

Improving the Tribological Properties of Ceramic Dies

Heat Treatment of the Surface of the ChS57 Alloy with Powerful Nanosecond Ultraviolet Laser Pulses.

Metallographic and Eddy Current Study of Boride Strengthening Coatings

The Effect of Surface Conditions on Corrosion Resistance of a Cobalt-Chromium Alloy

On the Issue of Laser Selective Removal of Paint Coating from a Sample of Metal Plating of Aircraft Gliders

Structural-Mechanical Properties of Polyurethane Surface after Carbon Ion Subplantation

The Effect Covering on the Change in the Properties of Hard Alloys

Impact of Nanodispersed Diamond Graphite Additive on Metal Cutting Temperature

Precast Textured Tool and the Construction of an Intensive Grinding Process Based on It

Chapter 6: Materials and Technologies in Construction

Studies of the Influence of Graphite on the Physical Mechanical and Thermal Properties of Polyurethane Foams for Construction Applications

On the Durability of Concrete under the Action of Ultra-Low (up to -196 °C) Technological Temperatures

Cement Building Materials with Powdered Optical Discs as a Filler

Effective Fine Concrete Modified with a Highly Dispersed Wollastonite-Based Additive

Modified Gypsum Binder for Plastering Systems

Thermal Changes in the Mass, Size and Density of Steel Fiber Concrete after Calefaction

Use of Bacterial Carbonatogenesis to Increase the Strength of Cement Solutions with the Help of Microorganisms

Building Systems Based on Foamed Modified Polymers

The Influence of Ferrous Metallurgy Waste in the Aktobe Region on the Frost Resistance of Ceramic Bricks Based on Low-Melting Clay

Assessment of the Impact of High Temperature on the Strength of Reinforced Concrete Structures during Operation

Investigation of the Rate of Vacuum-Conductive Drying of Wood-Particle Panels Based on Polyvinyl Alcohol

Effect of Cement Paste Preparation Procedure and Cement Stone Age on its Phase Composition.

Unused Plant Waste and Thermal Insulation Composition Boards on their Basis

Sulfide Technology Based on Sulfur Waste Product of Coke Production

Filled Heat Efficient Ceramics

Theoretical Assessment of the Prospects for the Use of Raw Materials in Ceramic Production

Polymer-Bitumen Binders Compositions Selection by Using the Experimental Planning Method

The Use of Waste from the Processing of Copper-Zinc Concentrates of the East Kazakhstan Region in the Production of Non-Fired Refractory Composites

Analysis of the Quality of Quartz-Feldspar Sand as a Component of a Composite Binder

Influence of Fillers on Silicate Compositions Porization

Research of Physical and Mechanical Properties of Fly Ash Ceramics with SiO2 and Al2O3 Nanoparticles as Functional Addition

Extreme Modelling of Concrete Optimal Composition and Content of the Components

Determination of the Chemical Composition of Corrosion Defects on the Inner Surfaces of Hollow Reinforced Concrete Structures

Chapter 7: Computational Procedures, Modelling and Numerical Simulation in Materials Science

System Analysis and Control of the Influence of a Mixed Type of Chemical Bond in Substances and Materials on their Structure and Properties

Modeling of the Process of Drying and Coalescing Nanodispersion Spreading

Finite-Element Simulation of Steckel Mill Rolling

Methodology for Calculating Heat Loss in the Study of Friction Stir Welding

Investigation of Surface-Functionalized CNT-Based Array for Detection of Acetone Vapors

Evaluation of Pozzolanic Activity of Metakaolin Chemometric Method According to the UV-VIS-NIR Spectroscopy

Effect of Initial Conditions and Numerical Investigation of Instability Developed during Synthesis of TiC via Vortex Combustion at Moderate Temperatures. Model of Vortex Combustion.

Statistical Model of a Thin Film Formation.

Notes:

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3776-2

OCLC:

1251449067