THERMEC 2013 : selected, peer reviewed papers from the 8th International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, December 2-6, 2013, Las Vegas, USA / edited by B. Mishra, M. Ionescu and T. Chandra.

Format:

Book

Conference/Event

Contributor:

Mishra, B., editor.

Ionescu, M., editor.

Chandra, T. (Tara), editor.

Conference Name:

International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (8th : 2013 : Las Vegas, USA)

Series:

Materials science forum ; Volume 783-786.

Materials Science Forum, 1662-9752 ; Volume 783-786

Language:

English

Subjects (All):

Materials--Congresses.

Materials.

Composite materials--Congresses.

Composite materials.

Physical Description:

1 online resource (2893 p.)

Edition:

1st ed.

Place of Publication:

Zurich, Switzerland : TTP, 2014.

Language Note:

English

Summary:

Selected, peer reviewed papers from the 8th International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, December 2-6, 2013, Las Vegas, USA.

Contents:

Intro

THERMEC 2013

Preface, Committees and Acknowledgements

Table of Contents

Keynote Presentations

Aspects of Thermomechanical Processing of 3rd Generation Advanced High Strength Steels

Diffusion Bonding of Duplex Stainless Steel and Ti Alloy with and without Interlayer

Development Status, Applications and Perspectives of Advanced Intermetallic Titanium Aluminides

The Influence of Thermomechanical Controlled Processing on Bainite Formation in Low Carbon High Strength Steel

Mechanical Properties of High-Manganese Austenitic TWIP-Type Steel

{111}&lt

110&gt

Recrystallization Texture Evolution in Al-Mg-Si Alloy Sheets Fabricated by Symmetric/Asymmetric Combined Rolling Process

Dynamic Transformation during the Torsion Simulation of Strip Rolling

Factors Influencing the Shearing Patterns in High-Pressure Torsion

The Cube Recrystallization-Texture Related Component in the β-Fiber Rolling-Texture FCC Metals

Modelling Microstructure and Properties during Annealing of Cold-Rolled Al-Mn-Fe-Si-Alloys with Different Microchemistries

Development of Fracture Assessment Standards in Japan with Weibull Stress

Control of Oriented Extracellular Matrix Similar to Anisotropic Bone Microstructure

Biofunctional Surface Layer and its Bonding Strength in Low Modulus β-Type Titanium Alloy for Biomedical Applications

Effects of Austenite Conditioning and Transformation Temperature on the Bainitic Microstructure in Linepipe Steels

Chapter 1: Al Alloys

A Numerical Model for Predicting the Zener-Hollomon Parameter in the Friction Stir Processing of AZ31B

Corrosion Resistance of Al-Cu Alloys in Function of the Microstructure

Microstructure, Fracture and Mechanical Properties of ECAPed Aluminum P/M Alloy with Respect to the Porosity.

Deformation of AA6016 Aluminum Alloy Sheets at High Temperature and Strain Rate

High Thermal Conductivity Aluminum Powder Metallurgy Materials

Finite Element Simulation of Diffusion and Precipitation with Application to Internal Oxidation of Ni-Xwt%Cr Alloys at 950°C

Alloy Design for Semi Solid Metal Forming

An Investigation into Double Oxide Film Defects in Aluminium Alloys

A Novel Process for Grain Refining and Semisolid Processing

Ultrasonic Degassing of Aluminum Alloys

Morphology of Si Phase in Al-Mg-Si-Cu Alloys with Excess Si Addition

Dynamic Observation of Hydrogen Gas Release during Crack Propagation in Al-Zn-Mg Alloy

Isothermal and Non-Isothermal Annealing of Cold-Rolled Al-Mn-Fe-Si Alloys with Different Microchemistry States

Effect of Heat Treatment Conditions and Small Addition of Cu on Occurrence of Serration in Al-Si Alloys

Separation of Pure Silicon from Al-Si Alloy Melts

The Evolution of Texture and Deformation Anisotropy at an Equal Channel Extruded Aluminum 1050 Alloy

Onset of the Portevin-Le Chatelier Effect: Role of Synchronization of Dislocations

Multiscale Analysis of Acoustic Emission during Plastic Flow of Al and Mg Alloys: From Microseconds to Minutes

Quantitative Investigation on Nano-Scale Precipitates in an Al-7.5Zn-1.7Mg-1.4Cu-0.12Zr Alloy under Various Aging Tempers

Plating on Developed Al-Mg-Zn Alloy Casting and its Glossiness

Statistical and Physical Micro-Feature-Based Segmentation of Cortical Bone Images Using Artificial Intelligence

Influence of SDAS on the High Temperature Tensile Behaviour of the C355 Al Alloy

Microstructural Characteristics of Diecast AlMgSiMn Alloy

Image Processing Characterization of Microstructures of Al-Si Casting Alloy

Microstructure, Properties and Design of Direct Quenched Structural Steels.

Hardening of Al-Mg-Si Alloys and Effective Particle Size in Microstructural Models

Effect of Annealing on Structure and Mechanical Behavior of an AA2139 Alloy

The Role of Cr in H Desorption Kinetics in Rapidly Solidified Al

Grain Refinement of Al Cast by Novel Al-Al2.5Cu0.5Ti Refiner Fabricated by Cold Pressing

Recrystallization Microstructure and Texture of Highly Strained Commercial Purity Aluminium Alloy

Reinforcement of Hypereutectic Al-Si Alloys with Fe-Bearing Compounds and Si Particles Assisted with Ultrasonic Treatment

Development of Homogeneity in an Al-6061 Alloy Processed by ECAP and ECAP-Conform

Effect of Contraction Behaviors during Solidification of 7xxx Aluminum Alloys on Hot Tearing Susceptibility

Mechanical Properties of Al-10 Mass % Si-Mg High-Pressure Die-Casting Alloy with Different Mg Content

Influence of Cold Rolling Reduction and Cross Rolling on Recrystallization Texture Formation in Electro Deposited Pure Iron with a Sharp and Homogeneous &lt

111&gt

//ND Fiber

The Numerical and Experimental Study on Electromagnet-Air Knife DC Casting Process of Large-Size AA 7055 Aluminum Alloys

The Numerical and Experimental Study on DC Casting Process of Three-Layer Composite Ingots of 4045/3004/4045 Aluminum Alloys

Effect of Processing Conditions on the Microstructure Development during Constrained Groove Pressing of Aluminium

Chapter 2: Mg Alloys (Prof. Karl U. Kainer Symposium)

Tensile Deformation of Magnesium and Magnesium Alloy Single Crystals

Corrosion Characterization of Magnesium Alloys - The Role of Process Parameters

Parameters Controlling High Temperature Deformability of Wrought Magnesium Alloys

The Effect of Ce Addition on the Creep Resistant Mg-Sr-Mn Alloys

The Orientation Dependence of Strain Hardening and Texture Development in an Extruded Magnesium Alloy.

Effect of Thermomechanical Processes on Twin Roll Casted Magnesium Alloy Sheets

Room Temperature Screw Form Rolling of AZ91D Magnesium Alloy through Processing by Extrusion-Torsion Simultaneous Working

Fabrication of Mg Alloy Single Crystals Containing Rare Earth Elements and their Mechanical Behavior

Development of New High-Strength and Heat-Resistant Mg-Zn-Y-X (X=Zr and Ag) Casting Alloys

Microstructure and Defect Structure Evolution in Ultra-Fine Grained MgAlZn Alloy

Effect of Plane Strain on the Microstructure and Texture of AZ31 Sheet with Various Reduction Ratios

Compressive Characteristics of AZ91 Containing Sn Alloy with the Microstructure

Investigation of Properties of CaO Added Wrought Mg-Zn-Y and Mg-Y-Zn Alloys

Degradation of Magnesium Alloys in Artificial Urine Solution for Urological Device Applications

Influence of Nd in Extruded Mg10Gd Base Alloys on Fatigue Strength

Effect of ZrB2 Nanoparticle Addition: Nano-LPSO-Grain Structured Ultra-High Strength Mg-RE Alloy

Low Temperature Warm Forming of Magnesium ZEK 100 Sheets for Automotive Applications

Effect of CaO on Thermal Conductivities of Mg and Mg-Zn Alloys

Manufacturing Technology and Usable Properties of Magnesium Alloy after Plastic Deformation

Hot Forging of Cast Magnesium Alloy TX31 Using Semi-Closed Die and its Finite Element Simulation

On the Bonding Strength of Mg-Mg and Mg-Al Material Compounds

A New Model for Discontinuous and Continuous Precipitation in AZ91 Magnesium Alloy

Age-Hardening Behavior of Mg-Al-Zn Alloys Produced by Sand Mold Casting

Microstructure and Mechanical Property in Cast AZ91 Magnesium Alloy with Y Addition

Method for the Depletion of the Basal Texture in Rolled AZ31 Magnesium Sheets

Microstructure Evolution of Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy during Isothermal Forging Process.

High Temperature Creep Behavior and Effects of Stacking Fault Energy in Mg-Y and Mg-Y-Zn Dilute Solid Solution Alloys

Recrystallization of AZ31 Alloy

Microstructural Characteristics and Mechanical Properties of Spray-Deposited Mg-Gd-Y-Zr Alloy

Improved Paint Baking Response of a Novel Al-Mg-Si Alloy Automotive Body Panels by Adding Zn Element and Pre-Ageing Matching

Relaxation of Misfit Dislocations at Nodes

Microstructure Change of AZCa912 Magnesium Alloy Continuous Casting Bar by Hot Compression

Twin Roll Casting (TRC) of Magnesium Alloys - Opportunities and Challenges

Twin Roll Casting and Rolling of New Mg-Wrought Alloys for Body Protective Safety Equipment

Effect of Microstructure on Hot Bulging Deformation for AZ31 Magnesium Alloy Sheet with Resistance Heating

Chapter 3: Ti Alloys/Aerospace Structural Metallic Materials

ATI 425® Alloy Formability: Theory and Application

Recovery and Recrystallization during Thermo-Mechanical Processing of Ti-6.5Al-1.5Zr-3.5Mo-0.3Si Alloy

Modelling of the Ductile Damage Behaviour of a Beta Solidifying Gamma Titanium Aluminide Alloy during Hot-Working

Effect of Al Addition on Phase Constitution and Heat Treatment Behavior in Ti-8.5mass%Mn-1mass%Fe-Al Alloys

Three-Stage Character of Strain Hardening of α-Ti in Tension Conditions

Friction Stir Welding of Ti-6Al-4V Alloy

Effect of Zr Addition on High Temperature Mechanical Properties of Near Alpha Ti-Al-Zr-Sn Based Alloy

Dynamic Globularization of α-Phase in Ti6Al4V Alloy during Hot Compression

Fatigue and Fracture Behavior of Porous TiNi Alloys

Mechanical Properties of Ti-Mn-Al-Fe Alloys after Solution Heat Treatment

Effect of Si and Ge Addition on the Evolution of Microstructure in Near Alpha Titanium Alloy

FEM Study of Superplastic-Like Forming of Ti-6Al-4V Alloy.

Beta-Forging of Ti6Al4V Titanium Alloy Powders Consolidated by HIP: Plastic Flow and Strain-Rate Relation.

Notes:

Description based upon print version of record.

Includes bibliographical references at the end of each chapters and indexes.

Description based on online resource; title from PDF title page (ebrary, viewed July 22, 2014).

Description based on publisher supplied metadata and other sources.

ISBN:

3-03826-454-7

OCLC:

880637613