Mechanical properties of materials from nano to micro/meso-scale : selected, peer reviewed papers from the Local Mechanical Properties (LMP 2014), November 12-14, 2014, High Tatras, Slovak Republic / edited by Alexandra Kovalcikova and Frantisek Lofaj.

Format:

Book

Contributor:

Kovalcikova, Alexandra, editor.

Lofaj, Frantisek, editor.

Series:

Key engineering materials ; Volume 662.

Key Engineering Materials, 1013-9826 ; Volume 662

Language:

English

Subjects (All):

Materials--Mechanical properties--Congresses.

Materials.

Physical Description:

1 online resource (277 p.)

Edition:

1st ed.

Distribution:

Enfield, New Hampshire : Trans Tech Publications Inc, [date of distribution not identified]

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications Ltd, 2015.

Summary:

Selected, peer reviewed papers from the Local Mechanical Properties (LMP 2014,) November 12-14, 2014, High Tatras, Slovak Republic.

Contents:

Intro

Mechanical Properties of Materials from Nano to Micro/Meso-Scale

Preface, Committees and Sponsors

Table of Contents

Chapter 1: Research of Mechanical Properties by Nanoindentation Technique

Residual Stresses and Energies in Elastic-Plastic Materials after Concentrated Contact

Pile-Up Correction of Mechanical Characteristics of Individual Phases in Various Steel by Depth Sensing Indentation

Anisotropic Mechanical Properties of Pure Magnesium Analyzed by In Situ Nanoindentation

Local Mechanical Properties of Cu-Co Alloys with Coherent Co Precipitates

Nanoindentation in Metallic Glasses with Different Plasticity

Nanoindentation Study of the Influence of the Loading Rate on the Deformation of Metallic Glasses

Relationship between Indenter Calibration and Measured Mechanical Properties of Elastic-Plastic Materials

Investigation of Indentation Parameters Near the Interface between Two Materials

Influence of Hydrogen Content on Microstructure and Mechanical Properties of Zr1Nb Fuel Cladding after High-Temperature Oxidation

Influence of Plasma Treatment on the Surface Properties and Strength of Bonded Joints at Selected Polyolefins

Combined Indentation Testing of Spark Plasma Sintered Steels

Fracture Process in a Fine-Grained Cement-Based Composite Monitored with Nanoindentation and Acoustic Emission

Strain Mapping of Indented Zr-Based Bulk Metallic Glass Using Nano-Diffraction

Influence of Microstructure on Tribological Properties and Nanohardness of Silicon Carbide Ceramics

Local Mechanical Characterization of Metal Foams by Nanoindentation

Chapter 2: Mathematical Simulation and Modelling

Finite Element Analysis of Elastic-Plastic Concentrated Contact

Plastic Zone around a Fatigue Crack Determined by the FEM and a Nanoindentation Technique.

Mechanical Properties Determination of Unknown and 10Ch2MFA Steel Based on Non-Destructive Instrumented Hardness Test

Particulate Composite Damage: The Influence of Particle Shape on Crack Path

Modelling and Analysis of Reinforced Concrete Beams

Chapter 3: Films and Coatings Engineering

Characterization of Sputter-Deposited NiTi Thin Film by Nanoindentation

Study of the Mechanical Properties of Single-Layered and Bilayered CoCrFeSi Ribbons Using Quasistatic and Dynamic Nanoindentation Tests

Effect of Nitrogen Content on the Mechanical Properties of Amorphous SiCN Films

Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings

Cracking in Brittle Coatings during Nanoindentation

Nanohardness of DC Magnetron Sputtered W - C Coatings as a Function of Composition and Residual Stresses

High Temperature Resistance of Selected HVOF Coatings

Deterioration of Local Mechanical Properties of HVOF-Sprayed Stellite 6 after Exposure to High-Temperature Corrosion

Utilization of Acoustic Emission in Scratch Test Evaluation

Influence of Hot Corrosion on Local Mechanical Properties of HVOF Sprayed Coating Based on NiCrBSi Alloy

Chapter 4: Mechanical Properties of Biomaterials

Mapping of Local Changes of Mechanical Properties in Trabecular Interconnections

Comparison of Micromechanical Parameters of Different Dental Implants Using Nanoindentation

Micromechanical Properties of Biocompatible Materials for Bone Tissue Engineering Produced by Direct 3D Printing

Local Mechanical Properties of Highly Porous Si3N4 for Trabecular Bone Replacement

Wear and Mechanical Properties of Various Bone Cements - Influence of Saline Environment

The Effect of the Cortical Bone Thickness on the Stress Distribution in Dental Implants by FEM.

The Effect of Graded Structure of Sintered Iron-Manganese Biomaterials on the Range and Distribution of Local Hardness Values

Chapter 5: Mechanical Properties of Materials in Micro- and Meso-Scales

Barrage Lock Concrete Porosity Evaluation Using X-Ray Microtomography

Scratch Resistance of the Si3N4-Graphene Nanoplatelets Composites

Estimation of the Plastic Zone Size from the Multi-Parameter/Generalized Form of Fracture Criteria on Various Mode I Geometries

Estimation of Local Plastic Deformation in Cutting Zone during Turning

Surface Layer Micro-Hardness of Modified LDPE by Radiation Cross-Linking after Temperature Load

Hardness/Microhardness Properties of HDPE Blends

Effect of High Doses Beta Irradiation on the Micromechanical Properties of Surface Layer of Glass-Filled Polypropylene

Micro-Indentation Test and Morphology of Electron Beam Irradiated HDPE

The Use of a 3D Scanner for Evaluating the Morphology of a Sandblasted Concrete Surface

Correlation between Hardness and Fatigue Properties

Fatigue Strength and Damage Mechanisms of Laser Welded Structural Carbon Steel Sheets

Mechanical Joining of Various Materials by Clinching Method

Local Notch Toughness of Slab Surface Zone in ULC/IF and HSLA Steels

Non-Destructive Analysis of Surfaces after Hard Milling Based on Barkhausen Noise Technique

Influence of Nanoparticle Size on Strain at the Core-Shell Interface

Generation of Nanoscale Stripes at Failure of Amorphous Metals

The Behaviour of Recycled Material with Particles of Various Sizes of Polyamide 6 to Micro Hardness

Evaluation of Influence of Carbon Nanotubes on the Mechanical Properties and Morphology of the Thermoplastic Polymer Matrix

Comparison of the Results of Creep and Micro-Indentation Creep to Irradiated HDPE

Local Strengthening of EN AC-44200 Al Alloy with Ceramic Fibers.

Behavior of Glued Connections under Shear Loading

Experimental Verification of the Effective Thickness of Laminated Glass

Determination of Mechanical Properties of Non-Conventional Reinforcement

Evaluation of Material Parameters of Multiphase Materials Using Drift Distortion Corrected SEM Imaging

Short Overview of the Effects of Nanoparticles on Mechanical Properties of Concrete

The Effect of Technology on Micromechanical Properties of Rubber

Keywords Index

Authors Index.

Notes:

Includes indexes.

Description based on online resource; title from PDF title page (ebrary, viewed September 26, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0026-5

OCLC:

958570405