Advances in fracture and damage mechanics XIV : selected, peer reviewed papers from the 14th International Conference on Fracture and Damage Mechanics (FDM 2015), September 21-23, 2015, Budva, Montenegro / edited by Darko Bajic, Zdenko Tonkovic and Ferri Aliabadi.

Format:

Book

Conference/Event

Contributor:

Bajić, Darko, 1967- editor.

Tonković, Zdenko, editor.

Aliabadi, M. H., editor.

Conference Name:

International Conference on Fracture and Damage Mechanics (14th : 2015 : Budva, Montenegro)

Series:

Key engineering materials ; Volume 665.

Key Engineering Materials, 1013-9826 ; Volume 665

Language:

English

Subjects (All):

Fracture mechanics--Congresses.

Fracture mechanics.

Materials--Fatigue--Congresses.

Materials.

Physical Description:

1 online resource (307 p.)

Edition:

1st ed.

Distribution:

Enfield, New Hampshire : Trans Tech Publications Inc, [date of distribution not identified]

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications Ltd, 2016.

Summary:

Selected, peer reviewed papers from the 14th International Conference on Fracture and Damage Mechanics (FDM 2015), September 21-23, 2015, Budva, Montenegro.

Contents:

Intro

Advances in Fracture and Damage Mechanics XIV

Preface and Committees

Table of Contents

Fracture Prediction for Ultralow Carbon Steel Sheet Subjected to Draw-Bending Using Forming Limit Stress Criterion

Influence of Small Cavity Existing in the Vicinity of 3D Crack Front

Computation of Effective Material Properties in Smart Composite Materials by a Symmetric Galerkin BEM

Multi-Physics and Multi-Scale Deterioration Modelling of Reinforced Concrete

Experimental Analysis of Ti6Al4V Orthogonal Cutting

Ductility of Ultra-High Performance Concrete and its Correlation with Tensile Strength Increase

Rheological Study of the Performance and the Vulnerability of an Element of RC Structure during and after a Seismic Signal

Experimental Tensile Tests on Bone Cement: Effect of Test Sample Shape

On the Influence of the Contact Force and the Angle between the Wires on ACSR Conductors' Mechanical Properties and Durability

Light Alloys Structural Behaviour in Severe Environmental Conditions

Evaluation of Bond Strength between Steel Fiber Reinforced Ultra-High Strength Concrete and Rebar

Boundary Element Analysis of Stiffened Panels with Repair Patches

Different Inclusion Contents in H13 Steel: Effects on VHCF Response of Gaussian Specimens

Mixed-Mode Crack Patterns in Ordinary State-Based Peridynamics

Flexural Property and In Situ Observation of Carbon Milled Fiber Added Plain Woven Carbon Fiber/Epoxy Resin Composite

Preparation and Characterization of Halloysite Nanocomposites by Rapid Prototyping Technology

A Micro-Mechanical Model for Grain-Boundary Cavitation in Polycrystalline Materials

Fatigue Resistance of Laser Welded S355 Steel Sheet

High Temperature Low Cycle Fatigue Characteristics of Grit Blasted Polycrystalline Ni-Base Superalloy.

Numerical Fracture Analysis of Compact Tension Shear (CTS) Specimens with Tortuous Crack Fronts

Inelastic Dynamic Seismic Response of 15-Story and 25-Story RC Buildings with and without Shear Walls Designed with the Mexico City Building Code

Effects of Fine Particle Peening on Fatigue Strength of Transformation-Induced Plasticity (TRIP)-Aided Martensitic Steel

Fatigue Crack Growth Behaviour of Friction Stir Welded Aluminium Alloys

Description of Strengthening Mechanism in Layered Ceramic Composites

Evaluation of J Integral for Interacting Twin Collinear Through-Wall Cracks in a Plate under Tension

Evaluation of Defects in Adhesive Joint by Double Cantilever Beam Experiment

Crack Bridging Modelling in Bioglass® Based Scaffolds Using Gradient Elasticity Theory

Calibration Function for Fatigue Crack Propagation

Interfaces Behavior in Glued Granular Materials

Crack Coalescence and Failure Patterns in Brittle Rock-Like Specimens with Pre-Existing Fissures under Uniaxial Loading: Experimental Studies

Pounding between Inelastic Three-Storey Buildings under Seismic Excitations

Influence of Size and Proximity of Paint Coating Defects on Corrosion Behavior of Carbon Steel Plates

Mechanical and Fatigue Parameters of Two Types of Alkali-Activated Concrete

Influence of Semi-Circular Cracks on Threaded Connection Fatigue by Means of Kitagawa-Takahashi Diagram and El Haddad Equation

Predicting Micro-Mechanics Damage Behaviour at a Metal-Ceramic Interface in a Reinforced Alloy

TEM Study of Microstructure Changes, Formation and Distribution of Slip Bands in Austenitic Steels after Low-Cycle Fatigue (LCF) Deformation - II

Deformation of Electroelastic Materials with Dispersed Microdamageability

Investigation on Damage Tolerance of Thick Laminate Composite Structure.

Strength Prediction of Laminated Composites upon Independent Constituent Properties

Simulation of the Transient Behavior of Matter with Characteristic Geometrical Variations &amp

Defects Irradiated by Nanosecond Laser Pulses Using FEA

Three-Dimensional Modeling of Single-Lap Joints with Variable Interfacial Crack Length

A Simulation Study of Surface Breaking Crack in Concrete Beam Based on Time-Reversed Theory of Surface Wave

Interfacial Fracture Strength of Micro-Scale Si/Cu Components with Different Free-Edge Shape

The Role of Residual Stresses in Particulate Composite with Glass Matrix

The Research about the Strength of Composite Riser Pipes Based on Finite Element Method

Second-Order Computational Homogenization Approach Using Higher-Order Gradients at Microlevel

Study on the Physical Properties of Recycled Cold Asphalt Using Cementless Binders

Study on the Durability of Cementless Concrete Produced with Industrial By-Products

Experimental Study on the Microstructure of Cementless Concrete through the SEM and XRD Analysis

Effect of Resin Particle on Interfacial Shear Strength of CF/MAPP after Immersion

Numerical Simulation of Strain Localization of Rock-Like Material Containing Single Flaw

The Influence of Wedge Shape on the Determination of Dynamic Fracture Toughness in SHPB Test

Unable to Detect Burial Defective Rubber Sheet in Digital Image Correlation Method

Research on the Variation of Residual Stress in the Rail Caused by the Wheels Repeated Rolling

Mechanical Properties and Corrosion Mechanism of GFRP Rebar in Alkaline Solution

An Effect of Laser Hardening on Contact and Bending Fatigue of a 42CrMo4 Steel

Failure Susceptibility in Thin Films with Extensive Incompatibility in Thermo-Elastic Material Properties

Study of Reticulated Vitreous Carbon Foam as a Quasi-Brittle Material.

Effect of Voids on a Magistral Crack in Piezoelectric Brittle Materials

Damage Model for Degradation Induced by Volcanic Ash Deposition on Thermal Barrier Coatings

Statistical Analysis of SHM Passive Sensing Systems

On the Role of Double Die Angle on the Hydrogen Embrittlement of Cold Drawn Prestressing Steel Wires

Uncertainty Analysis of Active SHM System

Fracture Events Localization by Numerical Simulations of Cementitious Composites

On the Validation of Williams' Stress Function for Dynamic Fracture Mechanics

Energy Dissipation during Quasi-Brittle Fracture Associated with the Crack and the Fracture Process Zone Progression

A Dual Boundary Element Model for Electromechanical Impedance Based Damage Detection Applications

Optimal Sensor Placement for Damage Detection Based on Ultrasonic Guided Wave

Application of the Nonlinear Model of a Beam for Investigation of Interlaminar Fracture Toughness of Layered Composite

Numerical Investigation of a Stiffened Panel Subjected to Low Velocity Impacts

Finite Element Analysis on Crack Tip Deformation Behavior under Mode-II Loading in Single Crystal Superalloy

Analytical Tool for the Preliminary Design of an Adhesively Bonded T Joint

Keywords Index

Authors Index.

Notes:

Includes indexes.

Description based on online resource; title from PDF title page (ebrary, viewed September 26, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0012-5

OCLC:

923558128