Advanced design and manufacturing technology II : special topic volume with invited peer reviewed papers only / edited by Hun Guo [and five others].

Format:

Book

Contributor:

Guo, Hun, editor.

Series:

Key engineering materials ; Volume 693.

Key Engineering Materials, 1662-9795 ; Volume 693

Language:

English

Subjects (All):

Engineering design.

Manufacturing processes--Automation.

Manufacturing processes.

Computer integrated manufacturing systems.

Physical Description:

1 online resource (2,058 pages) : illustrations, photographs, graphs, tables.

Edition:

1st ed.

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications Ltd, 2016.

Summary:

Special topic volume with invited peer reviewed papers only.

Contents:

Intro

Advanced Materials and Manufacturing Technology II

Preface

Table of Contents

Chapter 1: Engineering Technologies in Designing of Machines and Equipments

A FE Modelling Method for the Thermal Characteristics of High-Speed Motorized Spindle

Aerodynamic Characteristic Analysis of Flow Structure around the High-Speed Train Equipment Bay

An Improved Design Method of High Efficiency Contactless Power Transmission in Ultrasonic Vibration System

Analysis of Multi-Components Force Standard Machine Loading System Based on Stewart Structure

Analyzing Out-of-Plane Vibration of a Rotating Ring with Wave Propagation

Combining Design of Vibration Absorbing and Isolation for a Power Equipment Based on 2 Degrees of Freedom

Design and Analysis of a Power Transmission Network Model of Electric Vehicle

Design and Analysis of Conjugate Cam Beating-Up Motion Law

Design and Analysis of the End-Effector of the Flexible Polishing Robot

Design of Equipments for Nonlinear Static Experiment of Rubber Damping Materials

Design of High-Speed Thin Steel Plate Roller Based on the Fuzzy Reliability

Design of New Type High-Speed Cutting Deformation Test Device

Design of Plasma Discharge Structure for Surface Treatment of PP Film

Design on the Main-Axis in Big Power Inverted Umbrella Aeration Machine Based on Genetic Algorithms

Development of High Speed Precision Press and its Development Trends

Dynamic Analysis and Simulation of 4R 3-DOF Wrists

Dynamics Simulation Analysis of Column for NC Bevel Gear Grinder

Empirical Research on Public Transport Type Escalator Riding Traffic Characteristics

Experimental on the Performance of Centrifugal Fan with Limited Size by Changing the Openness Distribution

Factors Affecting Contact Pressure Distribution on Bolted Joint Interface.

Five-Axis Stone Carving Machine Modeling and Optimization Design of the Column

Frequency Characteristics Analysis of Micro-Displacement Structure with Parallel Flexure Hinges

Improved Design of Driller Based on the Variable Drilling Speed Damping Mechanism

Investigation on the Metrology of Conical Thread Gauge

Luggage Impact and Structure Optimization for Rear Seat Frame of Automobile

Optimization Design of Input Location Parameters of Scissor Lift Mechanism

Optimization of the Frame and Performance Analysis of Solar Modules Based on Ansys Workbench and Solidworks

Particle Motion Simulation and Parameter Optimization Design in Drum Granulation

Research on Dynamic Characteristics of Glider Hydrofoil by Finite Element Models Analysis

Research on Modal Analysis of Aero-Engine Key Parts Structure Damage

Research on the Coaxial Connection between Gas Flowmeter and Critical Flow Venturi Nozzle Gas Flow Standard Device

Structural Design and Improvement of Spindle in Five-Axis Wood Engraving Machine

Study of Vehicle Jerking Problem during Clutch Engagement Based on Numerical Value Analysis Method

Study on the Dynamic Characteristics of the Winding Head

Study on Torsional Excitation of Vibration Stress Relief Based on Lateral and Torsional Coupling

Study on Vibration Characteristics for Vehicle Inner Doors

The Design and Development of a Kind of Antenna Pattern Far-Field Verification Test Stand Based on Level Acquisition

The Designing of High Speed Presses Safety Gates

The Finite Element Analysis and the Multi-Objective Optimization Design of Spindle Systems of CNC Gantry Machine Tools

The Influence of Non-Uniform Impeller on the Cross Flow Fan Noise

The Research and Design of a Storage Variable Delivery Machine

The Response of Irregular Enclosure with Different Excitation.

The Structural Design and Analysis of the New Type of Gripper

Design and Calculation of Explosion Rotary Cutting Deformation Test Device

Optimization Analysis of the Efficiency of the Gear Box in the In-Wheel Drive System

The Design and Application of a New Type of CNC Tool Nozzle

Basic Experimental Study on Rubber Materials for Vibration Damping in Vehicles

Biomechanical Analysis of Femoral Fixation with a New Compression Plate Using Finite Element Method during Stair Climbing

Dynamics Modeling and Simulation of Deployable Mechanism with Double Clearance

Effects of Wide-Area Operation Environment on the Bogie of High-Speed Train and Solutions

Energy Balancing Method to Identify Nonlinear Damping of Bolted-Joint Interface

Experimental Investigation of Dynamics of Assembly with Typical Mechanical Joint

Finite Element Analysis and Experimental Study on Failure Rolling Bearing

Finite Element Analysis of Dynamic and Static Performance for Machining Tool Bed of Precisions Grinding Machine SMF6020

Hydrodynamic Lubrication and Load Carrying Capacity Analysis of Laser Surface Texturing Valve Core

Kinetic Properties of Hybrid Vibration Screen with Two-Translation and One-Rotation

Modeling and Analysis of Single Hydraulic Props in Coal Mines

Nonlinear Dynamic Modeling of Constant Force Supported Thermal Power Pipeline

Numerical Analysis for an Novel Hooke Hinge Based on ANSYS

Research on FBE Grinding Device of Deepwater Multifunctional Pipeline Repair Machinery

Research on Thermal Resistance of Micro Heat Pipe with Trapezium-Grooved Wick

Simulation, Experiment and Optimization for Thermal Characteristics of a Machine Tool Spindle System

Study of High-Pressure Physical Properties of Marine Heavy Oil

The Study of Offshore Wind Power Jacket Cutting Equipment.

Vibration Analysis on the Tripod Sliding Universal Joint of Ships

A New Fuzzy Comprehensive Evaluation Method for Priority Design of Column of Vertical Grinding Machine

A New Integrated Performance Forecasting Model of TBM

An Approximate Analytical Solution for Dynamic Response of a Large Nonlinear Rotor-Bearing System

Analysis of Vibrational Energy on the Pendulum Based on Finite Element

Calculation of Meshing Efficiency of Helical Gear Based on Double Integral Method

Coupled FEM/BEM Method for Noise Prediction of Common and Sandwich Circular Saw Blades

Dynamic Characteristics Analysis and Structural Topology Optimization of the Plane Grinder

Hydrothermal Aging Test Study of Double-Glazed Module

Numerical Simulation of Duck Wave Energy Converter

A Numerical Research on Diverse Cratered Film Cooling Hole Geometries

Color Offset in the Process of High-Power LED Life Aging

The Analysis of Longitudinal Impact Response for Variable Cross-Section Rod

The Vibration Features Analysis on Special Computer

The Process Research and Numerical Simulation of Composite Roll

Chapter 2: Materials in Mechanical Engineering

An In Situ Raman Spectroscopy Study of Load Transfer for Carbon Nanotube Film

Application of Different Dispersants in Fabricating Ti(C,N)-Based Cermet Tool Materials

Carbon Nanotubes Decorated by Carbon Nanospheres through Hydrocarbon Ion Deposition

Cellular Automaton Modeling of Dynamic Recrystallisation Microstructure Evolution for 316LN Stainless Steel

Design of Nano/Micro-Structured Diamond Coating on Cemented Carbide

Drawing Die Preparation of Composite Diamond Coating Based on Nb Interlayer

Fabrication and Characterization of Lanthanum Treated Carboxyl-Graphene Oxide Self-Assembled Composite Film on Silicon Substrate.

Layer-by-Layer Fabrication and Tribological Investigation of PDDA/GO Multilayer Film

Microstructure and Tribological Behavior of Ultra-Fine Cemented Carbides

Oxygen-Enriched Combustion Characteristics of Solid Fuel - The Lignite

Semi-Sintered Medical Zirconia Ceramic Used for Denture CAM Processing

Study on Microstructure and Properties of Coating on the Surface of Fe14Mn6Si5Ni Alloy

Study on Performances of Plasma Sprayed Ceramic Coatings on Die Wear Surface

Study on SiС2 Nanoparticles to Aluminum Alloy Surface Performance by FSP

Study on the Constitutive Model of SiCp/Al Composites

Study on the Friction Factor and High-Temperature Friction Resistance of Semi-Metal Frictional Materials

Synthesis and Characterization of Graft Copolymers of Acrylic Acid onto Starch

The Microstructure Properties of PbO-TiO2-SiO2 System Sealing Solder for Vacuum Glazing

Tribological Performance Comparison and Analysis on Friction Material: Four Modified Phenolic (PF) Resins

Well-Ordered Nanoporous Copper Fabricated by Dealloying Cu-Mn and its Characterizations

Experimental Study of Element Diffusion between the Material of Heavy-Duty Cemented Carbide Insert and the Material of Large Cylinder

Microstructure Prediction of 316LN Stainless Steel for Dynamic Recrystallization Based on Cellular Automata

Research on Drilling of Ni-Based Powder Metallurgy Superalloys

Chapter 3: Advanced Technologies in Material Machining

3D Topography Analysis of Ball-End Milled H-13 Die Steel Surfaces Using Wavelet Decomposition Method

A Numeric Investigation of Rectangular Groove Cutting with Different Lateral Micro Textured Tools

A Study of Cutting Force and Force Coefficients in Orthogonal Cutting of High-Strength CFRP T700 Laminates

An Experimental Investigation of Cutting Forces in Micro End-Milling Process.

Analysis on the Friction and Wear Properties of Friction Stir Jointing for 7022 Aluminum Alloy Joining Region.

Notes:

Includes bibliographical references at the end of each chapters and indexes.

Description based on online resource; title from PDF title page (ebrary, viewed June 30, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0201-2

OCLC:

951642780