Advanced materials, processing and testing technology. II / edited by Dajing Fang and Tao Kuang.

Format:

Book

Contributor:

Fang, Dajing, editor.

Kuang, Dao, editor.

Series:

Key engineering materials ; Volume 871.

Key engineering materials ; Volume 871

Language:

English

Subjects (All):

Materials science--Congresses.

Materials science.

Physical Description:

1 online resource (394 pages).

Edition:

1st ed.

Place of Publication:

Switzerland : Trans Tech Publications, [2021]

Summary:

Selected peer-reviewed full text papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology (AMPTT 2020)Selected, peer-reviewed papers from the 2nd International Conference on Advanced Materials, Processing and Testing Technology (AMPTT 2020), May 23-24, 2020, Guangzhou, China.

Contents:

Intro

Advanced Materials, Processing and Testing Technology II

Preface

Table of Contents

Chapter 1: Properties and Processing Technologies of Steel and Alloys

Microstructure and Mechanical Properties of W-High Entropy Alloy Composite by Hot Swaging

Analysis of the Crack of 304 Stainless Steel and Improvement Measures

Analysis of Microstructure and Properties of High Strength Steel for Vehicle Axle

High-Throughput Characterization of Composition and Performance of Titanium Alloys Based on Nanoindentation Technology and EPMA

Influence of Mould Slenderness Ratio on the Solidification of Heavy Ingots by Numerical Simulation

Quantitative Characterization of Heat Treatment Response in a Single Crystal Nickel-Based Superalloy

Effect of Tempering Process on Microstructure and Mechanical Properties of Low Alloyed Cast Steel

Study on Fatigue Crack Growth of Laser Melting Deposited 12CrNi2 Alloy Steel Based on XFEM

Microstructure and Mechanical Properties of Low Alloy Ultra-High Strength Steel Microalloyed with Cerium

Influence of Riser Necking Ratio and Taper on the Solidification of Heavy Ingots by Numerical Simulation

Research on Deformation Prediction Method of Laser Melting Deposited Large-Sized Parts Based on Inherent Strain Method

Research on Springback during Hot Stamping with Uniform and Local-Thickened Sheet Blanks

Experimental and Numerical Analyses of Tubular Electrohydraulic Forming Process

Effect of Annealing Temperature on Microstructure and Properties of Cold Drawn Tube

The Studies of Irradiation Hardening and RIS on IASCC of Reactor Internals Bolts

Yield Behavior of Tube Hydroforming and it's Effecti on Hollow Component Manufacturing

Chapter 2: Surfaces and Special Coatings

The Coatings Formation and Characteristic of a Low Pressure Thermal Plasma Torch.

Preparation of WC/Ni Flexible Cloth Coating by Vacuum Brazing

Researching Advances in Application of Bio-Inspired Superhydrophobic Metallic Surface

Microstructure and Property of Novel γ-Fe/ (Cr, Fe)7C3 Lamellar Eutectics Reinforced Composite Coating

Chapter 3: Properties and Processing Technologies of Special Structural and Functional Materials

The Effect of MgO Stabilizer on the Phase Composition and Microstructure of Zirconia Metering Nozzle Matrix

The Influence of Rapid Prototyping Technology on Optimization of Automobile Energy-Absorbing Box

Effect of High Temperature Treatment in Ar Atmosphere on the Tensile Strength and Structure of SiC Fiber

Effect of Tensile Stress on Characteristics of High-Temperature Superconducting Tape

Preparation of Fe-Cu-Based Friction Material and its Adoption in Automobile Mechanical Mechanism

Cutting Behavior of Self-Lubricating Ceramic Tool in Dry Machining of 40Cr Quenched Steel

Thermal Behaviour in the Stereolithography Process for Al2O3 Ceramic Suspension

A High Thermoelectric Performance ZT in p-Type LaSe2 Crystal

Chapter 4: Properties and Application of Polymers and Composites

Research and Prospect of Diamond/Aluminum Matrix Composites

Optimal Design of Composite Material Maintenance Structure for Aircraft Based on ANSYS Workbench

Study on Preparation of Novel Dicyclopentadiene Phenol Epoxy Resin Materials Based on Different Degrees of Polymerization

Performance Improvement of Carbon Fiber Reinforced Epoxy Composite Sports Equipment

Preparation and Mechanical Properties Analysis of Aviation Mechanical Carbon Fiber Reinforced Plastics

Chapter 5: Materials and Technologies for Electronics

The Distribution Trend of Boron Atoms in Semiconductor Silicon under High Temperature

RETRACTED: Fractal Structure in Poly(3-Alkylthiophene) Derivatives.

First-Principles Study of Ag3Sn, AgZn3 and Ag5Zn8 Intermetallic Compounds

Fabrication and Investigation on the Polyimide/Al2O3 Composite Films via Ion Exchange Technology

Research on the Magnetron Sputtering Performance of Active Matrix Liquid Crystal Display Electronic Materials Based on Amorphous Oxide Thin Film Transistors

Effect of Laser Processing Parameters on Microhole Quality of Aluminium Nitride Ceramics

Effect of Reaction Temperature and Mixture Ratio on Polysilicon Production Process

Chapter 6: Chemical Technologies and Chemical Production

A Preparation Method of β-Carotene Reference Standard from β-Carotene Food Additive Based on High Speed Countercurrent Chromatography (HSCCC)

Research on the Stability of Pd-Based Multi-Component Supported Catalysts

Study on Electrochemical Oxygen Evolution Properties of Bimetallic Carbon Nan Sheets

Research Progress of N-Alkylation of Alcohol and Amine by "Hydrogen Reaction

Chapter 7: Building Materials and Structural Elements

Stress Loss of Pre-Tensed CFRP Strips Strengthening Square RС Column

Performance Test of C60 Self-Compacting Steel Fiber Concrete

Model Test of Steel-Concrete Composite Beam Deck under Negative Moment

Effect of Initial Consolidation Stress Path on Shear Behavior of Calcareous Sand

Study on the Development and Performance of a New Concrete Antifoaming Agent

Study on Porous Structure of Porous Media in Geotechnical Materials

Asphalt Modified by Ethylene-Acrylic Acid Copolymer Ionomers: Fundamental Investigations of Mechanical and Rheological Properties

Synthesis, Characterization and Application of a Potential Chemical Sand-Fixing from Lignin Sulfonate Graft Urea-Formaldehyde Resin

A Novel Approach to Characterize the Quantity and Distribution of Microorganisms in Microbial Self-Healing Cementitious Materials

Keyword Index.

Author Index.

Notes:

Includes bibliographical references and indexes.

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3740-1

OCLC:

1204134939