Modern Trends in Materials Processing.

Format:

Book

Author/Creator:

Bratan, Sergey.

Contributor:

Roshchupkin, Stanislav.

Series:

Key Engineering Materials

Key Engineering Materials ; v.Volume 910

Language:

English

Subjects (All):

Manufacturing processes--Congresses.

Manufacturing processes.

Materials--Congresses.

Materials.

Physical Description:

1 online resource (1176 pages)

Edition:

1st ed.

Place of Publication:

Zurich : Trans Tech Publications, Limited, 2022.

Summary:

Selected peer-reviewed full text papers from the 5th International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021).

Contents:

Intro

Modern Trends in Materials Processing

Preface

Table of Contents

Chapter 1: Materials Processing Technologies

Maximum Operability of Replaceable Hard Alloy Plates during Steel Turning EI867-VD

A Note on the Change in the Surface Quality Characteristics during Flat Grinding of Titanium Intermetallic with Shape Memory Effect

Dispersion of Flatness of the Machined Surface and Optimization of Cutting Conditions when Performing a Real Experiment of Face Milling of High-Hardness Steel

Modeling of Molten Metal Flows in a Continuous-Casting Machine Mold at Free Rotation of the Floating Closed-Bottom Nozzle

Modeling of Gear-Hone Teeth with Consideration of Elasticity, Correction, and Operational Wear

Engineering Quality Support of the Surface Layer and Operational Properties of Machine Parts during the Process of Electroerosion

The Model of Local Fracture on Brittle Material Surface during Machining

Investigation of the Effect of Pretreatment of the Carbon Fiber Surface on the Continuity of the Sol-Gel Coating

Contact Stresses during Roller Rolling of Heat-Exchange Tubes

Application of Combined Processing Methods for High-Tech Products Manufacturing

Development of Technology for Producing Holes in Parts with Unpredictable Surface Fluctuations

Welding Mode Justification for a T-Joint

Use of Hidden Phase Transfer Heat for Temperature Stabilization in Technological Cutting Systems

Influence of Processing Modes on the Distribution of Wall Thickness during Cell Formation

Researching of the Influence of the Cutting Parameters of Expanded Polystyrene with a Thermal Tool on the Form Errors of the Product

Determination of the Optimal Temperature for Processing Styrofoam with a Thermo-Tool.

Study on the Ultrasonic Vibration Impact on the Performance of Taps when Thread Cutting in Workpieces Made of Difficult-to-Machine Materials

Tilt Angle Effect on Friction Stir Welding Conditions

Investigation of Hadfield Steel Machinability in Milling Operations

The Impact of Cutting Modes on the Output Turn-Milling Parameters for High-Speed Steel

Algorithm of Determination of Optimal Conditions for Low-Rigidity Prismatic Workpieces Flat Grinding

Analysis of the Properties of the Fluidized Bed during the Formation of the Abrasive-Polymer Compound for Waterjet Cutting

Improving Productivity of Misaligned Boring of Hydraulic Cylinder Holes with a Rotating Cutter Block Based on Computer Simulation Results

Combined Processing of Flat End Surfaces of Electrical Parts

Efficiency of Application of Epilams when Protecting the Surface of Fast Cutting Tools

Modeling of Technological Processes for the Deposition of Composite Plasma Coatings

Influence of Forging Force on Tensile Strength of the 30KhGSA/40KhMFA Steels Welded Joints Made by Rotary Friction Welding

Effect of Elements of the Cutting Conditions on the Amplitude of Vibration during End Milling

Titanium Drawing

Effect of Hot Machining on the Surface Quality of Cylindrical Parts

Application of Additive Technologies in the Development of Aerodynamic Models for Rocket and Space Technology Products

Additive Technologies in Manufacturing and IT Industry

Analysis of Factors Affecting Operability to Assess Risks and Opportunities in the Operation of Built-Up Cutting Tools

High-Performance Processing of Complex-Shaped Parts Using Combined Methods

Improving the Efficiency of Machine Grinding of Double Curvature Surfaces with a Profiled Flap Wheel

Calculation of the Grinding Performance of Diamond-Bearing Ceramic Tools.

The Use of Laser Surface Modification Technologies for Obtaining Parts of Roller-Screw Mechanism

Development and Implementation of the Technology for Obtaining Channels in the Turbopump Units Bodies

The Use of Additive Technologies in the Study of the Process of Cross Wedge Rolling Workpiece for the Stamping of the Crankshaft

Model Selection and Dragging Parameters in Cross-Wedge Rolling

Research of the Influence of Cutting Conditions on the Temperature Field during Turning

Improving the Corrosion Resistance of Polished Stainless Steel Parts by Introducing the Energy of the Ultrasonic Field into the Forming Zone

Application of Software Tools for Simulation of Hot Isostatic Pressing

The Method of Calculating the Optimal Shape of the Electrode-Tool for Electrochemical Treatment of Gas Turbine Engine Blades

Quantitative Evaluation of the Effectiveness of Laser Surface Modification Technologies

Research the Impulse Stamping Technology of High-Strength Hard-to-Form Alloys

Cold Rolling Electrostimulation of Hard-Deform Alloys

Technological Characteristics of Production of Implants from Titanium and Alloys Based on it

Ultrasonic Surface Machining of Aluminium Alloy Parts

Numerical Simulation of Shrinkage Porosity during Casting Process

Numerical Simulation of Welding Distortion in Laser Metal Deposition Additive Manufacturing Process

Influence of High-Speed ECAP on the Structure and Properties of Copper and Copper Alloy of Cu-Cr System

Manufacture of Molding Tooling Based on TEIS-53 Heat-Resistant Resin

Simulation of a Diamond Grain Interaction with Ceramics Using the Smoothed Particle Galerkin Method

Implementation of a Fatigue Fracture Approach to Grinding Wheel Wear Using Numerical Simulation

Creation of Grooving and Parting Tools with Cooling Channels Manufactured Using Additive Technologies.

Additive Technology for Forming Channels with Galvanic-Mechanical Coatings

Research on the Mandrel Wear of a Screw Rolling Piercing Mill by the Finite Element Method

Influence of Friction Stir Welding Modes of Copper and Aluminum Alloys

Influence of the Duration of Current Pulses on the Roughness in the Combined Processing of Corrosion Steel 12H18N10T

Simulation of Rolling and Analysis of Structure and Properties of F420W Cold-Resistant Steel for Manufacture of Wind Turbine Towers

Hybrid Optimization for Machinability Enhancement during Green Machining of Stainless Steel

Developing Spiral-Conical Gears for Microsystems by Wire-Assisted Electrical Discharge Machining

Some Aspects of the Experimental Method for Determining Residual Stresses in the Circular Grooves of Body Parts

Influence of Preheating and Postweld Heat Treatment on the Structure and Strength of the Wire Frame Welded Joint Made of Spring Steel C62D

Simulation of Hydro-Mechanical Billet Pressing of Fibrous Bimetallic Composites

The Effect of Hydrogen on the Crack Resistance in the Laser Treatment Area of Structural Steels Used for the Manufacture of Sealed Capsules during Hot Isostatic Pressing

Technology of Obtaining and Mechanical Processing of Resistant Powder Coatings of Ni-Mo-Al System

Modernization of Electrode Composite Material Based on Copper Powder for Electrical Discharge Machining of High-Strength Alloys

Development of Thermoplastic Composite Tube from HDPE/Barley Straw Fibers Using Extrusion Method

Sequential Treatment of Steel Surfaces by Nitriding and Ultrasonic Hardening

Quality Control of Gas-Thermal Coatings of Variable Composition

Constructional Features and Energetic Parameters Influence on Structure Formation and Sealed Welded Joints Properties in the Production of Capsules for Hot Isostatic Pressing.

Modification of the Surface of Structural Materials by Concentrated Energy Flows in Order to Improve their Performance Properties

The Peculiar Properties of Economically Effective Technology of Forming of the Ceramic Coating Based on Aluminum Oxide

Intensification of Restoration of Hydraulic Equipment Components by Iron Plating in the Flow of Electrolyte

Mathematical Modeling of Anodic Oxidation and Cathodic Reduction of Metals Prone to Passivation, Taking into Account the Peculiarities of Heat and Mass Transfer in the IEG under Pulsed Modes

Friction-Electric Modification of the Surfaces of Machine Parts with Tungsten Carbides

Weldability Window for High-Velocity Impact Welding of Al and Ti Plates Obtained by Numerical Simulation

Study of the Effect of Copper (II), Zinc and Iron (II) Sulphates on the Froth Flotation of Sphalerite by Sulfhydryl Collectors

Chapter 2: Materials Science

On the "Super" Storage of Hydrogen in Activated Graphite Nanofibers

Investigation of the Effect of Vibration on the Bearing Capacity of Composite Materials

Computational and Experimental Evaluation of the Tensile Strength of a Reinforced Polymer Coating with a Substrate

Microstructure and Properties of 20Cr23Ni18 (AISI 304L) Thin Steel Tapes Obtained by Melt Spinning

Tribological Behavior of Titanium Alloys during Friction against Ceramics

Regularities of Mass Transfer in the Finishing Layer on the Basis of a Heat-Insulating Dry Construction Mixture in the Process of Moistening

Quality Assurance for the Appearance of Paint Coatings

Increased Material Durability with a Discrete Oxide Layer

Mathematical Modeling of Optimization Process for Shell Mold Material Physical Properties and Structure

Polylactide Fiber Materials and their Application in Agriculture.

Influence of Biodegradable Component Nature on Biodegradation of Composites Based on Polyethylene.

Notes:

Description based on publisher supplied metadata and other sources.

ISBN:

9783035721492

3035721491

OCLC:

1321794772