Recent advances in materials, mechanical and civil engineering : ICRAMMCE 2017 : selected, peer reviewed papers from the International Conference on Recent Advances in Material, Mechanical and Civil Engineering - 2017 (ICRAMMCE-2017), June 1-2, 2017, Hyderabad, India / edited by Dr. P. Nageswara Rao, Dr. R. Kotaiah and Dr. D. Venkateswarlu.

Format:

Book

Conference/Event

Contributor:

Rao, P. Nageswara, editor.

Kotaiah, R., editor.

Venkateswarlu, D., editor.

Conference Name:

International Conference on Recent Advances in Material, Mechanical and Civil Engineering (2017 : Hyderabad, India)

Series:

Applied mechanics and materials ; Volume 877.

Applied Mechanics and Materials, 1662-7482 ; Volume 877

Language:

English

Subjects (All):

Mechanical engineering--Congresses.

Mechanical engineering.

Civil engineering--Congresses.

Civil engineering.

Physical Description:

1 online resource (471 pages) : illustrations.

Edition:

1st ed.

Place of Publication:

Zürich, Switzerland : Trans Tech Publications Ltd, 2018.

Summary:

ICRAMMCE 2017Selected, peer reviewed papers from the International Conference on Recent Advances in Material, Mechanical and Civil Engineering - 2017 (ICRAMMCE-2017), June 1-2, 2017, Hyderabad, India.

Contents:

Intro

Recent Advances in Materials, Mechanical and Civil Engineering

Preface, Committees, Sponsors

Table of Contents

Chapter 1: Structural Materials and Processing Technologies

Microtexture Study: Effect of Different Irradiation Sources on Zirconium and its Alloys

Biosorption of Basic Textile Dye from Aqueous Solution Using Pongamia pinnata as Adsorbent

Effect of FSP on Strength and Fracture Toughness of Aluminium Alloy 7000

Equilibrium and Isotherm Studies on the Removal of Basic Textile Dye from Aqueous Solutions Using Kigelia africana Biosorbent

Mesoporous Iron-Manganese Magnetic Bimetal Oxide for Efficient Removal of Cr(VI) from Synthetic Aqueous Solution

Studies on Notch Tensile Properties of Ti-5Al-2.5Sn ELI at Cryogenic Temperature for Hydrogen Embrittlement Effect

Application of Composites in Orthotic Calipers and its Experimental Validations

Study on Mechanical Property of Aluminium 6061 with E Glass Fiber Reinforced Composite

Development of Mathematical Modeling and its Exploration Based on Genetic Algorithm for Blanking Die Design Parameters Optimization

Effect of Cast Geometries on Particle Dispersion in Metal Matrix Composites

Predicting the Deposition Efficiency of Plasma Sprayed Alumina Coatings on AZ31B Magnesium Alloy by Response Surface Methodology

Characterisation of Micro Channels Machined with ECDM for Fluidic Applications

FEM of ECDM Process on Semi Conducting Materials

An Analysis on Bilayer Tube Flaring

Effect of Welding Speed on Mechanical Properties of Friction Stir Welded AA 6082-T6 Al Alloy

Development &amp

Characterization of Alumina Coating by Atmospheric Plasma Spraying

Optimization of MRR and Surface Roughness of AlMg3 (AA5754) Alloy in CNC Lathe Machine by Using Taguchi Method.

Dry Sliding Wear Behavior of Titanium Metal Powder Filled Aluminum Alloy Composites for Gear Application

Effect of Pre-Ageing on the Age Hardening Response of Cryorolled Al-Mg-Si Alloy

Experimental Investigation of EDM Parameters on Al-LM6/SiC/B4C Hybrid Composites

Improving Mechanical Properties of Dissimilar Material Friction Welds

Influence of Water Cooling and Post-Weld Ageing on Mechanical and Microstructural Properties of the Friction-Stir Welded 6061 Aluminium Alloy Joints

Investigations of Milling Parameters on Hemp Fiber Reinforced Composite Using ANOVA and Regression

Fabrication and Analysis of Accumulative Roll Bonding Process between Magnesium and Aluminum Multi-Layers

Chapter 2: Building Materials and Construction Technologies

Effects of Alkaline Solution on the Properties of Slag Based Geopolymer

Evaluation of Deformation Modulus for the Jointed Rock Masses Using Equivalent Continuum Approach

Horizontal Pullout Capacity of a Group of Two Vertical Square Anchors Embedded in Medium Dense Sand

The Behaviour and Performance of Geo-Textiles with Reference to CBR Value on Clay Soil

Geotechnical Evaluation of Traditional 'Bunds' - Earthen Levees - From Goa

Effect of Increasing Sasobit on Permanent Deformation and Moisture Damage of Asphalt Mixes

Suitability of Quarry Dust as a Partial Replacement of Fine Aggregate in Self Compacting Concrete

Structural Behavior of Hybrid Reinforced Concrete Exterior Beam Column Joint

Influence of Geotextile and Geogrid Reinforcement on Strength Behaviour of Soft Silty Soil

Incorporation of Axial Aging Effects of Pile Foundations into Pushover Analysis of Offshore Jacket Platforms

Seismic Response of Multistoried Building with Different Foundations Considering Interaction Effects.

Application of Principles of Linear Elastic Fracture Mechanics for Concrete Structures: A Numerical Study

Geotechnical Characterization of Dredged Material and Effect of Lime Stabilisation on its Strength Characteristics

Effect of Nano Clay on Mechanical Behavior of Bamboo Fiber Reinforced Polyester Composites

Evaluation of Performance Point of Structure Using Capacity Spectrum Method

Dynamic Analysis of Sandwich Plate Structure by Finite Element Method

Chapter 3: Applied Mechanics and Design Practice in Mechanical Engineering

Turbulent Natural Convection in Partitioned Square Cavities with Different Lengths and Positions

Thermo Structural Analysis of Carbon-Carbon Nozzle Exit Cone for Rocket Cryo Engines

Optimisation of Header of a Compact Radiator

Integrated Thermal Structural Analysis of Advanced Composite Plates and Shells

Nonlinear Analysis of Composite Plates and Shells Subjected to In-Plane Loading

Mixed Culture Microalgae-Based Coconut Biodiesel as Fuel to Improve DI CI Engine Performance, Emission Characteristics

Margin of Safety Estimation of Tongue and Groove Joint of Rocket Motors with Discontinuous End Ring

Levelized Cost of Electricity and Plant Load Factor of 7.5 MW Grid Connected Biomass Power Plant

Lattice Boltzmann Simulation of Transient Natural Convection in a Staggered Cavity with Four Vertically Heated Walls

Investigation on Application of Semiloof Shell Element for Isotropic, Composite and Functionally Graded Material

Effect of Skin Friction Coefficient on Power Developed by Flettner Rotor System for Ship Propulsion

Design and Analysis of Powered Ankle-Foot Mechanism Using Hydraulic System

Design Optimization of Squeeze Mode Magnetorheological Damper.

Experimental Investigation of Performance and Emissions Characteristics of a Diesel Engine with Pongamia Biodiesel and Diesel Blends

Design Optimization of Flow Mode Magnetorheological Damper

Experimental Investigation on Shallow Solar Pond Using CuO Nano Particles

A Review on Methods of Productivity Improvement in Solar Desalination

Thermal Performance on Portable Mini Solar Pond Using NaCl and Coal Cinder

Characterization of Exponential Cohesive Zone Model for Fracture Assessment of De-Bonded Composite Panels

Study on the Stress Concentration in GFRP Composite Plates with Multiple Cut-Outs Subjected to Shear Loading

Influence of Crack on the Instability of GFRP Composite Cylindrical Shells under Combined Loading

CFD Analysis of the Effect of Surface Contour of Nose Cone of a Space Vehicle on the Thermal Field during Re-Entry

Keyword Index

Author Index.

Notes:

Includes bibliographical references at the end of each chapters and indexes.

Description based on online resource; title from PDF title page (EBC, viewed April 4, 2018).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3173-X

OCLC:

1029501815