Materials engineering and technologies for production and processing III : ICIE-2017 : selected, peer reviewed papers from the International Conference on Industrial Engineering, May 16-19, 2017, Saint-Petersburg, Russian Federation / edited by Andrey Radionov.

Format:

Book

Contributor:

Radionov, Andrey, editor.

Series:

Diffusion and defect data. Solid state phenomena ; Pt. B, Volume 265.

Solid State Phenomena, 1662-9779 ; Volume 265

Language:

English

Subjects (All):

Materials science--Congresses.

Materials science.

Materials--Research--Congresses.

Materials.

Genre:

Conference papers and proceedings.

Physical Description:

1 online resource (1,173 pages) : illustrations.

Edition:

1st ed.

Place of Publication:

Zurich, Switzerland : Trans Tech Publications Ltd, 2017.

Summary:

ICIE-2017Selected, peer reviewed papers from the International Conference on Industrial Engineering, May 16-19, 2017, Saint-Petersburg, Russian Federation.

Contents:

Intro

Materials Engineering and Technologies for Production and Processing III

Preface, Conference Committee, Sponsors

Table of Contents

Chapter 1: New Functional and Structural Materials and Processing Technologies

Physical-Chemical Properties of Molybdenum Films Prepared with Magnetron Sputtering

Optimization of Synthesis Mode for Hydro Silicate-Based Supplements Used for Lime Dry Construction Mixtures

Current State and Future Prospects for Improvement of Mineral Melt Production Technologies

The Wear Resistance of Mottled Iron with Stabilized Carbide Phase

Research of Activity of Natural Radionuclides in Construction Raw Materials of the Volgograd Region

Sulfur Composite Materials Based on Sulfide Containing Industrial Waste

Environmental and Technical Possibilities of Marble Waste Recycling in Bricks and Sorbents Production

Improvement of Environmental Safety due to Utilization of Industrial Wastes in Refractory Concretes Production

Multi-Layer Wood-Polymer Composite

Study of Residual Stresses and Surface Hardening in Tubes for Nuclear Steam Generators

Multifractal Parametrization of Welded Joints Structure as an Instrument of Diagnostics and Detection of Defects

Assessment of Welded Joints Structure Defectiveness Based on the Presence of Non-Metallic Inclusions

Pulse Processing of Molten Metals

Choice of Laser Cementation Method of Blade Woodcutting Tools

Bolts Manufacturing Technology

Strengthening Mini Silo Construction Made of Reinforced Concrete Blocks with Carbon Fiber Lamellae

Strengthening Building Structures with Polymer Composite Materials

Influence of Concrete Mix Transportation with Inertia Conveyor on Concrete Properties

Structure and Properties of Concrete for Injection with Two-Stage Expansion.

On Effect of Superplasticizers and Mineral Additives on Creep Factor of Hardened Cement Paste and Concrete

Phenomenological Model of Low-Carbon Steels Hardening during Multistage Drawing

Low Density Cellular Concrete Made of Reftinskaya SDPP Fly Ash

Future-Oriented Technology of Preparing Suspensions of Metals

On Reliability of Stainless Maraging Steel

Ti-TiN Multilayer Coatings Obtained by ION FLUX Surface Modification

Wood Heat Treatment in Construction Materials Production

Lamb Wave Analysis for Plate of Weak Ferromagnetic YFeO3

Evolution of BrOCS 5-5-5 Alloy Microstructure and Mechanical Parameters under Intensive Plastic Deformation Conditions

Multi-Component Coatings Formation on Polycathode Magnetron Sputtering Systems

Thermal Modification of Wood in Production of Finishing Materials

Behavior of Micro-Alloyed Steel at Thermal Treatment

Diffusion Saturation by Titanium from Liquid-Metal Media as Way to Increase Carbide-Tipped Tool Life

Effect of Aggressive Components of the Marine Environment the Protective Properties of the Textile Materials

Expansion of Concrete Functionality due to Use of New Hydrophobic Additives

Fusion Technology Nanopowder Magnetic Fluids

Integrated Method of Study of Hardened of Details

Investigation of Heat Resistance of Al-Ni Layered Coating

Islet Nitriding of Product Surfaces Made from Alloy Steel

Mechanical Properties and Stress-Strain Behaviour of Binary and Ternary Composites Based on Polyolefins and Vegetable Fillers

New Composite Dispersion Reinforcement Materials with Modulated Characteristics

New Unconventional Additives in Concrete Technology for Expansion its Functionality

Physical and Technological Features of Formation of Large Thickness Welded Joints in Electron-Beam Welding.

Technology of Wood Waste Processing to Obtain Construction Material

Process of Shaped Metal Billets Production from Compositions Based on Iron Powder, Iron Oxide, and Binder

Quality Evaluation of Platinit Wire by Different Producers

Research of Wood Thermal Modification Process in Flue Gases Environment

Study of Carbon Fiber Materials Sorption Capacity to Remove Heavy Metal Ions and Oil Products from Wastewater during its Treatment

Study of Compression Soft Porous Foam Materials

Technological Increase of Adhesion Strength between Antifriction Coating and Base in Bimetal Fluid-Film Bearings

Technology of Mineral Raw Materials Granulation by Electric Arc for Manufacturing of Welding Fused Flux

Use of Low-Grade Vegetable Raw Materials in Production of Composites by Preliminary Processing

Polymer-Bitumen Binder Based Multifunctional Material

Properties of Elastomeric Adhesive Composition Based on Chlorinated Isobutylene Isoprene Rubber Obtained by Mechanochemical Halide Modification

Calculation of Joint Plastic Deformation to Form Metal Compound in Cold Condition

Carbonic and Mineral Adsorbent, Produced of Slurry Withdrawal of Oil-Extracting Production

Cold Spray Repairing Corrosively Damaged Areas on Aircraft Constructions

Colloid-Chemical Bases on Creation of Multifunctional Modifiers of Concrete Mix and Concrete

Combined Influence of Opoka and Slag on Cement Properties in Presence of Superplasticizer

Creating Carbon Nanotubes Microenvironment in Surfactant Water Solutions

Examining the Microstructure of Industrial Leaded Brass Blanks for Quality Control

Extension of Raw Material Base for Ceramic Building Bricks Production

Improving Masonry and Protective Paints Quality

Improving the Reliability of Shell Structures Made of Composite Nanomaterials

Ion Implantation Modification of Surfaces.

Nano Additives Influence on Fuel Oil Properties

Research of Efficient Methods of Superplasticizer Introduction into Cement Materials

Research of Materials for High Temperature Electromechanical Energy Converter

Simple Universal Kelvin Equation Valid in Critical Point Vicinity and its Application to Carbon Dioxide Capillary Condensation in Mesoporous Silica

Study and Analysis of Aluminate Dry Construction Mixtures Properties

Chemical Aspects of the Obtaining of Iron-Containing Coagulant-Flocculant from Electric Steel Melting Slag for Wastewater Treatment

Functional Nanostructured Tribotechnical Materials

Research on Influence of Technology of Bimetal Fluid-Film Bearing Manufacturing on Microstructure and Microhardness of Antifriction Coating and Steel Base

Study of Physical and Mechanical Properties of Non-Polar Rubber-Based Sealants Depending on Filler Type and Volume

Study the Effect of Heavy Elements Nanoparticles in the Photons Energy Spectrum in a Tissue-Equivalent Medium

The Production and Subsequent Selective Laser Melting of AlSi12 Powder

Theoretical and Experimental Investigation of Vibration Damping Sheet Dynamic Behavior

Using Mathematical Modeling to Develop Electrode Coating Composition for Stable Arcing and Arc Restarting

Combined Extender Pigments Based on Industrial Wastes

Influence of Al-Cu-Mn-Fe-Ti Alloy Composition and Production Parameters of Extruded Semi-Finished Products on their Structure and Mechanical Properties

Influence of Gas Shielding Method in Welding with Consumable Electrode on Heat Distribution in a Welded Product

Influence of Selective Laser Melting Process Parameters on Porosity of TiAl6V4 Alloy Fabricated by 200W CO2 Laser

Investigation of Ba-Fe-O System near the BaFe12O19.

Synthesis of EP648-TiC Metal Matrix Composite Powder for Selective Laser Melting by Ball Milling

Effect of Heat Treatment on Change Concentration of Powders in Gradient Material

Electro Physical Hardening of Non Metallic Composite Materials in Additive Technology

Heating and Cooling Impact on Mechanical Properties of RIP Electric Insulator for High Voltage Inputs

The Use of Ferrovanadium Production Sludge Wastes in Claydite Gravel Technology

Numerical Analysis of Stress-Strain State and Crack Propagation in Welded Samples

Capillary-Porous Effects in Concrete during Ice Abrasion

Sorption Properties of Nanostructured Calcium Aluminosilicate with Respect to Cesium Ions

Temperature and Humidity Dependence on Strength of High Performance Concrete

Refractory Core-Shell Powders for Additive Industries

Formation Structure and Properties of Parts from Titanium Alloys Produced by Direct Laser Deposition

Hydrofluoride Method of Complex Processing of Titanium-Containing Raw Materials

Modified Geomembrane Compositions for Hydraulic Structure Impervious Coatings

New 3D Cross-Linked Copolymers with Variable Mechanical Properties and High Durability

Research of Processes of Products Fabrication by Self-Propagating High-Temperature Synthesis (SHS) Method

Applying the Electron Concentration Calculation Method to Assess the Influence of Hydrogen on the Position of the Variable Solubility Lines in Ti-Cr System

Atomic Structure Design of Rapidly Quenched Amorphous Cobalt-Based Alloys

Beta-Phase Decomposition Sequence during Continuous Cooling of High-Temperature Titanium Alloy

Comparative Assessment of Resistance of Hardwearing Anodes, Ternary Coated with Iridium, Ruthenium and Titanium

Composite Material for Railroad Tie

Designing Metamaterial with Arc-Structure for Wide Broad Vibration Isolating.

Determining Undeformed Chip Thickness Models in Milling and its Verification during Wood Processing.

Notes:

Includes bibliographical references at the end of each chapters and indexes.

Current copyright fee: GBP28.00 50\0.

Description based on online resource; title from PDF title page (ebrary, viewed November 20, 2017).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3152-7

OCLC:

1009283399