Metal Additive Manufacturing.

Format:

Book

Author/Creator:

Lancaster, Robert J.

Contributor:

Fortunato, Alessandro.

Kolisnychenko, Stanislav.

Series:

Specialized Collections

Specialized Collections ; v.Volume 13

Language:

English

Subjects (All):

Powder metallurgy.

Physical Description:

1 online resource (722 pages)

Edition:

1st ed.

Place of Publication:

Zurich : Trans Tech Publications, Limited, 2020.

Summary:

Aggregated Book.

Contents:

Intro

Metal Additive Manufacturing

Preface

Table of Contents

Chapter 1: Powder Bed Fusion (PBF)

Microstructure of Built Part Obtained by Powder Bed Fusion Process with Metal

Powder Bed Fusion of Biomedical Co-Cr-Mo and Ti-6Al-4V Alloys: Microstructure and Mechanical Properties

Impact Testing of H13 Tool Steel Processed with Use of Selective Laser Melting Technology

Comparison of Hardness of Surface 316L Stainless Steel Made by Additive Technology and Cold Rolling

Electrochemical Characterization of Ti6Al4V Components Produced by Additive Manufacturing

X-Ray CT Investigation of Graded Ti-Ti64 Material Produced by Selective Laser Melting

Effect of Selective Laser Melting Process Parameters and Heat Treatment on Microstructure and Properties of Titanium Alloys Produced from Elemental Powders

Investigation of Functional Graded Steel Parts Produced by Selective Laser Melting

Formation of Structure in Titanium Lightweight Structures Made by Selective Laser Melting

Physical and Tensile Properties of NiTi Alloy by Selective Electron Beam Melting

Metallic Materials Prepared by Selective Laser Melting: Part Orientation Issue

Microstructure and Mechanical Properties of Ti-6Al-4V Alloy Samples Fabricated by Selective Laser Melting

Selective Laser Melting of Multi-Principal NiCrWFeTi Alloy: Processing, Microstructure and Performance

Heat Transfer and Phase Formation through EBM 3D-Printing of Ti-6Al-4V Cylindrical Parts

Comparative Study of the Ultrafine-Grained Structure 316L Stainless Steel and Ti-6-4 Alloy Produced by Selective Laser Melting

Energy Absorbing Properties of the Cellular Structures with Different Wall Thickness, Produced by the Selective Laser Melting

Mechanical Properties and Fatigue Resistance of 3D Printed Inconel 718 in Comparison with Conventional Manufacture.

Control of Deviations in Lattice Structures Manufactured by Selective Laser Melting

Selective Laser Melting of AlSi12 Powder

Single Track Formation during Selective Laser Melting of Ti-6Al-4V Alloy

Solidification and Microstructural Control in Selective Electron Beam Melting of Co-29Cr-10Ni-7W Alloy

Fabrication of the Beta-Titanium Alloy Rods from a Mixture of Pure Metallic Element Powders via Selected Laser Melting

Microstructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam Melting

Melting and Solidification Behavior of High-Strength Aluminum Alloy during Selective Laser Melting

Fabrication of Cu-Al-Ni Shape Memory Alloy by Selective Laser Melting Process

Microstructure Characterization of AlSi10Mg Fabricated by Selective Laser Melting Process

Comparison of the Hot Working Behavior of Wrought, Selective Laser Melted and Electron Beam Melted Ti-6Al-4V

Laser Based Manufacturing of Ti6Al4V: A Comparison of LENS and Selective Laser Melting

Experimental Study on Pore-Defect by Selective Laser Melting of 316L Stainless Steel

Wettability Behavior of Ti6Al4V Electron Beam Melted Surfaces

Use of Selective Laser Melting for Manufacturing the Porous Stack of a Thermoacoustic Engine

Selective Laser Melting of Ti42Nb Composite Powder and the Effect of Laser Re-Melting

Laser Assisted High Entropy Alloy Coating on Low Carbon Steel

Contribution of Additive Manufacturing of Rare Earth Material to the Increase in Performance and Resource Efficiency of Permanent Magnets

Research on Forming Quality of AlSi10Mg Powder for SLM Process

Chapter 2: Direct Energy Deposition (DED)

Laser Cladding of Heat-Resistant Iron Based Alloy

Characteristics and Evolution Mechanism of Solidification Microstructure for Laser Additive Manufactured Ti2AlNb-Based Alloy.

An Experimental Characterization of Powder/Substrate Interaction during Direct Metal Deposition for Additive Manufacturing

From Powder to Solid: The Material Evolution of Ti-6Al-4V during Laser Metal Deposition

Microstructure and Mechanical Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy Fabricated by Arc Additive Manufacturing with Post Heat Treatment

Optimization of Microstructural Evolution during Laser Cladding of Ni Based Powder on GCI Glass Molds

Air-Cooling Influence on Wire Arc Additive Manufactured Surfaces

Electron and Laser Beam Additive Manufacturing with Wire - Comparison of Processes

Influence of Technological Parameters of Direct Laser Deposition Process on the Structure and Properties of Deposited Products from Alloy Ti-6Al-4V

Experimental Investigation of Temperature Distribution during Wire-Based Laser Metal Deposition of the Al-Mg Alloy 5087

Microstructural Characteristics of Laser Metal Deposited Magnesium Alloy AZ31

Additive Manufacturing of Titanium Parts Using 3D Plasma Metal Deposition

Research of the Structure Defects at Wire-Feed Laser and Laser-Arc Deposition with AlMg6

Chapter 3: Cold Spray

Architectured Multi-Metallic Structures Prepared by Cold Dynamic Spray Deposition

Cold Spray for Additive Manufacturing: Possibilities and Challenges

Investigation of Aluminum Composite Produced by Laser-Assisted Cold Spray Additive Manufacturing

Additive Manufacturing of a CNT/Al6Si Composite with the Nanolaminated Architecture via Cold Spray Deposition

Cold Sprayed Additive Manufacturing of SiC/Al Metal Matrix Composite: Synthesis, Microstructure, Heat Treatment and Tensile Properties

Chapter 4: Metal Matrix Composites

Cladding of Stellite-6/WC Composites Coatings by Laser Metal Deposition.

The Effect of Laser Power on the Microstructure of the Nb-Si Based In Situ Composite, Fabricated by Laser Metal Deposition

Microstructure and Mechanical Properties of TiB2/ Al-Si Composites Fabricated by TIG Wire and Arc Additive Manufacturing

Selective Laser Melting of Nanocomposite Ti-6Al-4V and TiC Powder

Selective Laser Melting of Ti/cBN Composite

The Preparation of TiC/TiN Composites by Selective Laser Melting

Fabrication and Tailoring Interface Structure of Diamond/Al(and Al12Si) Composites for Heat Sink Applications by Vacuum Hot Pressing and Selective Laser Melting

Quasicrystalline Composites by Additive Manufacturing

Additive Manufacturing of Ti-6Al-4V with Added Boron: Microstructure and Hardness Modification

Selective Laser Melting of Mixed EP648-Alumina Powder

Selective Laser Fusion of Titanium Based Gradient Alloy Reinforced by Nano Sized TiC Ceramic

Chapter 5: Powder Characteristics

Effects of the Delivery Tube Diameter on the Qualities of Cu-9.7Sn-0.2P Alloy Powder Produced by Gas Atomization

Development of Bio-Compatible Beta Ti Alloy Powders for Additive Manufacturing for Application in Patient-Specific Orthopedic Implants

Research Progress of Preparation Technology of Nano Copper Powder for 3D Printing

Obtaining Spherical Powders of Grade 5 Alloy for Application in Selective Laser Melting Technology

The Study of the Characteristics of Metallic Powders after Electroerosion Dispersion

Water Atomized 17-4 PH Stainless Steel Powder as a Cheaper Alternative Powder Feedstock for Selective Laser Melting

Compositional Optimization of In718 Superalloy Powder for Additive Manufacturing

Characterization of Gas Atomized Ti-6Al-4V Powders for Additive Manufacturing

Developing New Materials for Electron Beam Melting: Experiences and Challenges.

Metallographic Analysis of the Suitability of a WC-Co Powder Blend for Selective Laser Melting Technology

The Influence of Powder Particle and Grain Size on Parts Manufacturing by Powder Bed Fusion

Effect of Powder Type and Particles Size on Microstructure of Selective Laser Sintered Parts

Chapter 6: Process Parameters

The Energy Density as a Reliable Parameter for Characterization of Selective Laser Melting of Various Alloys

Selective Laser Melting of Inconel 718 under High Power and High Scanning Speed Conditions

Effects of Process Parameters on Morphologies and Microstructures of Laser Melting Deposited V-5Cr-5Ti Alloys

Optimizing HIP and Printing Parameters for EBM Ti-6Al-4V

The Challenges Associated with the Formation of Equiaxed Grains during Additive Manufacturing of Titanium Alloys

Preliminary Analysis of Soft Magnetic Material Properties for Additive Manufacturing of Electrical Machines

Influence of Building Parameters on Surface Aspect and Roughness in Additive Manufactured Metal Parts

Chapter 7: Post-Processing and Machining

Influence of Abrasive Materials in Fluidised Bed Machining of AlSi10Mg Parts Made through Selective Laser Melting Technology

Secondary Machining Characteristics of Additive Manufactured Titanium Alloy Ti-6Al-4V

Effects of Heat Treatment on Compressive Behavior of Porous Aluminum Manufactured by SLM

Effects of Heat Treatment on Unique Layered Microstructure and Tensile Properties of TiAl Fabricated by Electron Beam Melting

Heat Treatment Behavior of the 18Ni300 Maraging Steel Additively Manufactured by Selective Laser Melting

Influence of Heat Treatment on Microstructure and Mechanical Properties of Selective Laser Melted TiAl6V4 Alloy

Effect of Optimized Heat Treatments on the Tensile Behavior and Residual Stresses of Selective Laser Melted AlSi10Mg Samples.

Assessment of Heat Treatment Effect on AlSi10Mg by Selective Laser Melting through Indentation Testing.

Notes:

Description based on publisher supplied metadata and other sources.

ISBN:

9783035737523

3035737525

OCLC:

1286632252