Functional and functionally structured materials IV. / Yafang Han.

Format:

Book

Author/Creator:

Han, Yafang, author.

Series:

Materials Science Forum Series

Materials Science Forum Series ; v.Volume 993

Language:

English

Subjects (All):

Adsorption.

Alloys.

Building materials.

Physical Description:

1 online resource (1,574 pages) : illustrations

Edition:

1st ed.

Place of Publication:

Switzerland : Trans Tech Publications, Limited, [2020]

Summary:

Selected, peer reviewed papers from the 20th Chinese Materials Conference 2019 (CMC 2019)Selected, peer reviewed papers from the Chinese Materials Conference 2019 (CMC 2019), July 10-14, 2019, Sichuan, China.

Contents:

Intro

Functional and Functionally Structured Materials IV

Preface

Table of Contents

Chapter 1: Properties and Processing Technologies of Structural Alloys and Non-Ferrous Metals

Removal Mechanism of Titanium Alloy Material in Ultrasound Vibration Drilling

Effect of Strontium Modification on the Morphology of Primary Si in Hypereutectic Al-Si Alloys

Deoxidation Process of Oxidized Zirconium Alloy

Effects of Alloying Process on Inclusions in Fe-9Cr Alloy Reinforced with Y2O3 Nanoparticles

Microstructure Formation and Nanoindentation Behavior of Rapidly Solidified Cu-Fe-Zr Immiscible Alloys

Effect of RE Addition on the Solidified Process and Microstructure of Al-7Si-0.3Mg Alloys

Correlation between Solidified Microstructure Evolution and Undercooling of Au-12 Wt.%Ge Eutectic Alloy

Mechanical and Tribological Behaviors of WAl12 Reinforced 2024 Aluminum Alloy Matrix Composites

Research on Strong Spinning Process of GH4169 Alloy

Preparation of Titanium Alloy Powder by Plasma Rotating Electrode Process

Microstructure and Mechanical Properties of 5052 Al Alloy by Cryogenic Rolling

Microstructure and Mechanical Properties of GMAW Welded Joints Er-Containing Aluminum Alloy

Penetration Damaging Behavior of TB17 Titanium Alloy

Effect of Extrusion Temperature on Microstructure and Mechanical Properties of 7A36 Aluminum Alloy

Investigations on the Hardness Distribution and Microstructure of Friction-Stir-Welded 6082 Aluminum Alloy

Microstructure of 7N01 Aluminum Alloy Microalloyed with Er and Zr in the Homogenization Process

Microstructure and Macrosegregation of Ф508 mm 7050 Aluminum Alloy Billet under Internal Electromagnetic Stirring

Microstructure of 7075 Aluminum Alloy by Homogenization

Modeling of Yield Strength in Retrogression of RRA Treatment of Spray Formed Al-Zn-Mg-Cu Alloy.

Effect of Ca and Zr Additions and Aging Treatments on Microstructure and Mechanical Properties of Mg-Sn Alloy

Effect of Ca on Microstructure and Mechanical Properties of Directionally Solidified Mg-Zn-Ca Alloys

Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts

Study on Compression-Torsion Deformation Behavior and Recrystallization Grain Size of Mg13Gd4Y2Zn0.5Zr Alloy

Microstructural Evolution and Properties of Cu-1.5 Wt %Ti Alloy during Aging

Microstructure, Texture and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy during Repetitive Upsetting-Extrusion after Heat Treatment

Microstructure and Properties of Rapidly Solidified Al-Zn-Mg-Cu Alloy

Microstructures and Mechanical Properties of a New Type of High Temperature Titanium Alloy

Effect of Primary α Phase Content on Creep Property of High Temperature Titanium Alloy

Effect of Heat Treatment Process on Microstructure of a New Metastable β Titanium Alloy

Hot Compressive Behavior and Constitutive Equation of Ti-Al-Nb-Zr-Mo-Cr Alloy

Constitutive Equation and Hot Processing Map for Tensile Test of Mg-13Gd-4Y-2Zn-0.5Zr Alloy at Elevated Temperature

Semi-Solid Rheological Squeeze Casting Process of ZL114A Aluminum Alloy Thin-Wall Complex Casting

Effect of Different Deformation Methods on Microstructure Evolution of TC4 Titanium Alloy Prepared by Spark Plasma Sintering

Fatigue Crack Growth Behavior of TA29 Titanium Alloy at Different Temperatures

Preparation of 2A14 Aluminium Alloy Large-Sized Hollow Ingots by Electromagnetic Stirring DC Casting

Structure Evolution of Au50Cu50 Alloy from Melt to the Disordered Solid Solution

Solidification Microstructure and Mechanical Properties of Bulk Near-Eutectic AlCoCrFeNi2.2 High Entropy Alloy.

Effect of Combined Electromagnetic Fields on Microstructure and Properties of Large-Sized Ingot of 2219 Aluminum Alloy

Mechanical Behavior and Microstructure of Hot Deformation of with Er 7N01 Aluminum Alloy

Oxidation Behavior of Ta-W Alloy

Precipitation Behavior and Strengthening Mechanism of Second Phases in AZ31-1.3Ca-1.0Sm-0.3La Alloy

Microstructure of Ti-Based Alloys after Rapid Solidification

Effect of Solution Treatment on Second Phase Dissolution for an Al-9.2Zn-2.0Mg-1.9Cu Alloy

Analysis of Porosities in Nickel-Based Superalloys Powders

Ultrasonic Preparation of Submicron Low Melting Point Alloy Powder

Non-Isothermal Kinetics Analysis of α→β Transformation in Zirconium Alloy

Microstructure and Mechanical Properties of a Novel Ti-6.5Al-2Sn-4Zr-1.5Mo-2Nb-0.25Fe-0.2Si High-Temperature Titanium Alloy

Effect of Cu Content on Ageing Behavior for AA3104-H19 Can Body Sheet

In Situ Observation on the Deformation Behavior of Primary α-Ti in a Textured Ti-6Al-4V

Development of Copper Alloy-Steel Bimetallic Bearing Materials and Manufacturing Technology

Microstructures and Phase Formation of Refractory MoNbTaVZr High Entropy Alloy

Preparation and Properties of Spherical Mo Powders by Plasma Rotating Electrode Process for Additive Manufacturing

Effects of Electromagnetic Agitation on Crystal Growth during the Pure Aluminum Slow Cooling Process

A Review on Water Footprint Research of Materials Industry

Progresses on Development of Manufacturing Methods of High Purity Tungsten Targets

Finite Element Analysis on Processing of PCD End-Mill Milling Copper

Microstructure and Texture Evolution of 0.6 mm Ultra-Thin-Walled Tubes of Magnesium Alloys Fabricated by Multi-Pass Variable Wall Thickness Extrusion (VWTE).

Microstructural and Textural Evolutions of OFHC Cu during the CECC Process and Annealing Treatment

Chapter 2: Properties and Processing Technologies of Structural Steels

Growth Kinetics of Interfacial Intermetallic Compound in Al(AA4343)/Steel(SUS316) Clad Strip

Microstructure and Properties of 20G/316L Dissimilar Metal TLP Welded Joints

Microstructure and Properties of Lean Duplex Stainless Steel UNS S32101 Welded Joint by Hot Wire TIG Welding

Effect of Thermal Aging on the Stress Corrosion Cracking Sensitivity of Z3CN20.09M Stainless Steel

Static Recrystallization Behavior of Non-Quenched and Tempered Steel 38MnSiVS

Effects of Zero Time Holding Quenching Temperature on Tempering Microstructure and Mechanical Properties of 40Cr Steel

Simulation of Mechanical Property and Fracture Behavior of Reactor Pressure Vessel Steel by Small Punch Test

Effect of Ferritic Hot Rolling Process on Microstructure and Properties of IF Steel

EBSD Study of the Effect of Hot Deformation on Low Carbon Bainitic Structure

Retained Austenite Control and Extra-Cryogenic Impact Toughness of Fe-3.0%Mn Low Carbon Steel

Prediction Model for Microstructure and Properties of Medium Carbon Non-Quenched and Tempered Steel Bar

Effect of Composition System on Microstructure and Properties of 1000-MPa Grade Cold Rolled DPSteel

Accelerated Transformation of Hot Deformed Austenite in SCM435 Steel

Effects of Final Cooling Temperature on Microstructure Transformation and Properties of Q550 Low Carbon Bainite Steel

Reliability Prediction of Variable Amplitude Corrosion Fatigue Life of TP140 Casing Steel

Comparative Study on Hydrogen Embrittlement Susceptibility in Heat-Affected Zone of TP321 Stainless Steel

Investigation on the Microstructure and Mechanical Properties of T23 Steel during High Temperature Aging.

Optimized Design of Ultra-High Strength Stainless Steel Based on Thermo-Calc Calculation

Effect of Tempering Temperature on Microstructure and Properties of Low Carbon High Silicon Alloy Steel Treated by Q-P-T Process

Analysis of Interfacial Bonding Strength and Microstructure of Rolled Clad Plates

Applications of Nickel-Based Alloy for Oil Country Tubular Goods

Analysis of Tensile Properties of N80Q Steel and 80SH Steel

Application Feasibility Study of High Strength Pipeline Steel to Rig Derrick and Substructure

Mechanical Response and Performance Relationship of X70 Pipeline Steel with Weld Zone

Chapter 3: Polymers and Composites

Preparation and Property of Waterborne Polyurethane/Cellulose Nanofiber Nanocomposite Films

Preparation and Magnetic Properties of Fe@SiO2 Soft Magnetic Composites

Microstructure and Properties of Co@RGO/Cu Composites by One-Step In Situ Reduction Method

Functionalization of MWNTs and its Influence on Thermal Performance of Modified Diphenyl Ether Polyimide Films

Manufactory and Properties of Poly(p-Phenylenebenzobisoxazole) Aerogels Prepared by a Simple Freeze-Drying Procedure

Preparation and Properties of Halogen-Free Flame Retardant Polyurethane for Superfine Fiber Leather

Effect of Simulated Seawater on Flexural Property of Corn Straw Fibers Reinforced Polypropylene Composites

Effect of Carbon Nanotubes Sizing Agent on the Mechanical Properties of Carbon Fiber/PP Composite

Synthesis of Four-Armed Star-Shaped Poly(N,N- Diethylacrylamide) by Group Transfer Polymerization in the Presence of Hydrosilylane

Effect of Air Oxidation Treatment on Interficial Properties of Carbon Fibers

Preparation of Silver Nanoparticles-Loaded Gel Fibers Based on Microfluidic Method and its Application as SERS Substrates.

Effect of Copoly(Ester-Amide 6)(PET-PA6) on Compatibility of PET/PA6 Blended Fibers.

Notes:

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3566-2

OCLC:

1193134931