Materials engineering and technologies for production and processing V : 5th International Conference on Industrial Engineering (5th ICIE 2019) / edited by Andrey A. Radionov.

Format:

Book

Contributor:

Radionov, Andrey A., editor.

Series:

Solid State Phenomena Series

Solid State Phenomena Series ; v.Volume 299

Language:

English

Subjects (All):

Production engineering--Congresses.

Production engineering.

Genre:

Conference papers and proceedings.

Physical Description:

1 online resource (1,240 pages)

Edition:

1st ed.

Other Title:

Materials engineering and technologies for production and processing five

Place of Publication:

Switzerland : Scientific.Net, [2020]

Summary:

5th International Conference on Industrial Engineering (5th ICIE 2019)Selected, peer reviewed papers from the 5th International Conference on Industrial Engineering (ICIE), March 25-29, 2019, Sochi, Russian Federation.

Contents:

Intro

Materials Engineering and Technologies for Production and Processing V

Preface

Table of Contents

Chapter 1: Polymers, Composites, Functional and Building Ceramics

Kurgan Clays in the Production of Ceramic Materials

Activity of Zinc Oxide Based Spinels Catalytic

Peculiarities of Heat and Mass Transfer in Porous Moistened Mediums at High Thermal Loads

Mathematical Modeling of High-Energy Pressing Process of Graphite-Plastic Composition

Improving Construction Engineering Properties of Soils Stabilized by a Cement Binder with Techno-Genic Products

Improvement of Strength Parameters of Foam Ceramics for Energy-Efficient Enclosing Structures

Modeling of the Transition Layer in Ceramic Matrix Composites from Coal Wastes and Clay

Determination of Rational Technological Parameters of Co-Extrusion Processing of Secondary Polymeric Materials by the Method of Physical Modeling

Receiving Composite Sorbents for Sewage Treatment on the Basis of Waste of Production and Processing of Micaceous Quartzite

Improving the Fungus Resistance of Polymer Composites

Techno-Genic Fillers in the Composition of Modern Polymer Paints

Study of the Influence of Heat Treatment on the Structure and Properties of Aluminum-Copper Multilayer Systems

Influence of Plasticizers on the Properties of Fine-Grained Polymer Concrete

Analysis of Electron Density Distribution in the CuAlO2 System

Properties of Epoxy-Diane Composites Modified by Techno-Genic Fillers

Quartzitic Waste, as the Possible Component of the Cement Flooring Composite Material

Investigation of Novel Polymer Composites Based on Recycled Multilayer Combined Packaging Materials

Formation and Corrosion Behavior of Nickel/Alumina Nanocomposites.

Reaction of Spot Radioactive Source with the Energy of 661.7 KeV on the Modification in the Structure of Surface Layer of Metal Composite Material

The Influence of Fiber Reinforcement on the Properties of the Self-Compacting Concrete Mix and Concrete

Study оf the Diffusion Interaction between Titanium and Aluminum in the Composition AMg6-AD1-VT1-0 after Rolling with Different Compression

Modeling Stress Deformed State Upon Contact with the Bodies of Two-Phase Microstructure

Investigation of Composition and Technological Parameters of Highly Porous Gypsum Products Obtaining

A Study of the Influence of Thickness of Anti-Diffusion Layer on the Structure and Thermal Resistance of Composite А5-Cr-St3

Improving the Bio-Resistance of Cement Concretes by Means of Fungicidal Poly-Functional Modifiers

Study of the Influence of Refractories Structure on the Thermomechanical Properties of Tunnel Kiln Equipment Lining

Study of the Suspension Stability of Titanium Dioxide of Anatase Modification for Self-Purifying Fine Concrete

Composition Material for Radiation Protection Based on Modified Disperse Titanium Hydride and Silicate Connecting

The Effect of Polyvinyl Alcohol on the System of Cement-Free Binding Alumino-Silicate Composition

Composite Materials Based on Plasma Treated Basalt Fibers for Heavy-Duty Concrete Products

Activating Effect of Aluminum Chloride in the Technology of Poly-Sulfides and Materials Based on them

Physical-Chemical Studies and Evaluation of the Suitability of Chernoyarskoe Deposit's Diatomite for the Synthesis of Foam Glass

Compositions and Properties of Polymeric Concrete with Granulight Additive

Assessment of Fire Safety of Coatings Based on Silicate Paint Sol

Synthesis of Ultra-Dispersed Spherical Composite Materials.

Prospects for the Development of Building Ceramics, Based on Stale Slags from the Non-Ferrous Metallurgy of Orenburg

The Economic Efficiency of the Development of Dry Mixes with the Supplement Based on Calcium Hydrosilicates

Face Ceramic Brick of Soft Molding Based on Opoka-Like Raw Materials

Fine-Grained Polymer-Cement Basalt Fibrous Concrete for 3D Printing

The Use of Water Treatment Petroleum Sludge in the Manufacture of Ceramic Products

To the Question of an Experimental Assessment of the Fatigue Characteristics of a Transversal Metal-Composite Compound

The Conditions and Results of Ferrite Based on Multicomponent Crystal Formation in High Entropic Oxide Systems

Ceramic Bricks of Semi-Dry Pressing with the Use of Fusible Loams and Non-Traditional Mineral Raw Materials

The Use of Hard Alloy Waste in Composite Galvanic Coatings for the Restoration of Car Parts

Regulation of Electrical, Thermal and Physical Properties of Composites Based on Carbon-Modified Portland Cement Materials

Simple Universal Kelvin Equation Valid in Critical Point Vicinity, External-Internal State Correction, and their Application in Understanding of Oxygen Capillary Evaporation and Condensation in Mesoporous Silica MCM-41

Preparation of Poly-Substituted Crystals with M-Type Hexa-Ferrite Structure Using Melts of the BaO-PbO-SrO-CaO-ZnO-Fe2O3-Mn2O3-Al2O3 System

Thermal Stability of Nano-Crystalline Nickel Electrodeposited into Porous Alumina

Heat-Resistant Composite Materials Based on Secondary Material Resources

Production of Foam Glass Materials from Silicate Raw Materials by Hydrate Mechanism

Use of Natural Biopolymers to Create Nanocomposite Materials

About the Possibility of Recycling Water Treatment Sludge in the Wood-Cement Composites Production.

The Influence of Temperature Testing on the Technical Data of Cementing Technology

Production of Hybrid Polymer-Oxide Materials Based on Molybdenum Oxide Compounds Using Transient Electrolysis Method

Chapter 2: Steels and Alloys, Metallurgical and Metalworking Technologies

The Influence of Cylindrical Specimen Size and Material Properties on the Distribution of Deformation during Torsion Test

Hardenability and Wear Resistance of Carburized to Hypereutectic Concentrations Steels

The Mechanical Properties of the Pipe Steel after Rolling at the Plate Mill

Simulation of High-Speed Cutting Using Deform 3D Software

Formation of Bead Shape, Structure and Mechanical Properties of Cold-Resistant High-Strength Steel Produced by Direct Laser Deposition Method

Theoretical Investigation of the Bending Process of the Pre-Strained Metal Sheet

On the Role of Gamma-Alpha Transformation in the Increase of the Fracture Toughness of Maraging Steel

Verification of a New Torsion Test Method to Study the Rheological Properties of Materials in a Cold State

Increase of Weld Joint Efficiency of the Combined Band of a High-Speed Rotor of an Electric Machine by Local Strengthening

Advanced Statistical Analysis of Grain Structure in Single-Phase Materials Nanostructured by High-Pressure Torsion

The Use of a Magnetic Suspension for the Crucibleless Metal Melting

Computer-Simulation of the Billet Shape Change during Helical Piercing

Study of Electromagnetic Effect Parameters Influence on Fluidity of Fine Nd-Fe-B Powder

The Peculiarities of Smelting of Wear-Resistant Cast Iron IChH28N2 in the Induction Crucible Furnace IChT10

Calculation of Phase Composition of α- and Near-α- Titanium Alloys

How the Material Thickness Affects 0.08% Carbon Cold-Rolled Sheet Steel.

Influence of Thermomagnetic Treatment on the Damping Properties and Structure of Iron-Based Alloys

Effect of Hf Doping of Commercially Pure Copper on Evolution of its Microstructure under High Pressure Torsion

About Impact Strength and Thermal Properties of Steel Melts

Thermodynamic Regularities of Nuclei Growth during Crystallization of Metastable Alloys

Determination of Thermo-Physical and Physical Properties of Complex Alloyed Brass

Increasing of Energy-Power Indicators of Mechanical Processing in a Planetary Mill by the Use of a Working Chamber with a Square Shape of the Internal Cavity

Effect of Friction on Compression Test of Ti-6Al-4V with Open-Cellular Structure

Investigation of the Effect of Oxygen Content in the Auxiliary Process Gas on the Quality and Speed of Laser Cutting of Steel Sheets

Scientific Approaches to the Development of Titanium-Based Alloys for Medical Implants

Phase Equilibria in a Liquid Metal of Fe-La-Ce-O System at 1600 °С

Investigation of Sulfatization Mechanism of Iron-Manganese Concretions in Fluidized Bed

Investigation of the Austenite Grain Growth in HY-TUF Steel

Plastic Twisting of Erect Metal Roller

Evaluation of the Friction Factor Influence on the Results of Cross-Wedge Rolling Simulation in Qform Software

The Method of Testing Cylindrical Specimen for Torsion in Order to Determine the Rheological Properties of Materials Sensitive to the Strain Rate

Microanalysis of Additive Products from Electro-Erosion Cobalt-Chrome Powders

Modeling of Tool for Cold Extrusion of Steel and Tooling with Proportional Bandaging

Prediction of Blast Furnace Thermal State in Real-Time Operation

Influence of Powder Layer Thickness on Microstructure of Selective Laser Melted TiAl6V4

Cast Iron and Steel Smelting in Induction Crucible Furnaces of Industrial Frequency.

Young Modulus at High Temperatures.

Notes:

Description based on print version record.

Current copyright fee: GBP32.00 50\0.

ISBN:

3-0357-3500-X

OCLC:

1138030649