Light metals technology 2015 : selected, peer reviewed papers from the Seventh International Light Metals Technology Conference (LMT 2015), July 27-29, 2015, Port Elizabeth, South Africa / edited by H. K. Chikwanda and S. Chikosha.

Format:

Book

Series:

Materials science forum ; Volume 828-829.

Materials Science Forum, 0255-5476 ; Volume 828-829

Language:

English

Subjects (All):

Light metals--Congresses.

Light metals.

Light metals--Metallurgy--Congresses.

Physical Description:

1 online resource (510 p.)

Edition:

1st ed.

Distribution:

Enfield, New Hampshire : Trans Tech Publications Inc., [date of distribution not identified]

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications Ltd, 2015.

Summary:

Selected, peer reviewed papers from the Seventh International Light Metals Technology Conference, (LMT 2015), July 27-29, 2015, Port Elizabeth, South Africa.

Contents:

Intro

Light Metals Technology 2015

Preface

Table of Contents

Chapter 1: Alloy Development

Achievements in Magnesium Alloy Research

Casting Development with a High Strength Aluminium Alloy

Challenges and Solutions in the Development of Magnesium Sheet for Sustainable Vehicle Concepts

Development of New Oxide Based Master Alloys and their Grain Refinement Potency in Aluminium Alloys

Thermal Stability of Al-Si-Cu-Mg Cast Alloys Modified with Transition Metals Zr, V and Ti

Twin-Roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiC

Chapter 2: Casting and Solidification

Controlling the Formation of Iron-Bearing Intermetallics in Wrought Al Alloys by Melt Conditioned DC (MC-DC) Casting Technology

Direct-Chill Casting of AA7449 Aerospace Alloy under Electromagnetic and Ultrasonic Combined Fields

Effect of Al-5Ti-1B Grain Refiner Addition on the Formation of Intermetallic Compounds in Al-Mg-Si-Mn-Fe Alloys

Effect of Solidified Structure on Hot Tearing in Al-Cu Alloy

Form Accuracy of Optical Mould Inserts Made from Rapidly Solidified Aluminium Alloys

Growth of Solidification Grain of Aluminum Alloy Near a Mold

Influence of Supercooling on the Formation of Primary Phase during Solidification

Magnesium Melt Protection

Melt Refining Technology of Highly-Contaminated Magnesium Alloy Scraps via a Sequential Refining Process

Microstructure and Texture Development during Melt Conditioned Twin Roll Casting and Downstream Processing in an AZ31 Magnesium Alloy

Reducing Non Value Adding Aluminium Alloy in Production of Parts by High Pressure Die Casting Using High Temperature Die Manufacturing Material

Segregation Characteristics of Rheo-High Pressure Die Cast Al-Alloy 2139 Plates.

Solidification and Interface Reaction of Titanium Alloys in the BaZrO3 Shell-Mould

Ultrasonic Melt Processing: Achievements and Challenges

Chapter 3: Powder Metallurgy

Analysis of the Cold Compaction Behaviour of TiH2-316L Nanocomposite Powder Blend Using Compaction Models

Deformation and Densification Study of Titanium Powder Compact during Powder Forging Using Gurson and Gurson-Tvergaard Criterion

Determination of Optimum Process for Thermal Debinding and Sintering Using Taguchi Method

Effect of Processing Parameters on the Properties of Metal Injection Moulded Titanium Dental Implants

Fabrication of Iron-Base Shape Memory Alloy Fiber Reinforced Aluminum by Spark Plasma Sintering

Kinetics of Titanium Metal Injection Moulding Feedstock Thermal Debinding

Powder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical Applications

Reinforcement of 2124 Al Alloy with Low Micron SiC and Nano Al2O3 via Solid-State Forming

Chapter 4: Heat Treatment and Phase Transformation

Contribution of Hydrogen Promoted Aluminium Partitioning to Tempered ά Martensite Embrittlement in Ti-6Al-4V

Development of a Continuous Cooling Transformation Diagram for an Al-Zn-Mg Alloy Using Dilatometry

Effect of Ageing Treatment on the Microstructure and Hardness of the Ti6Al4V Alloy

Effect of Rolling Temperature on Annealing of aa1050 Aluminium Alloy

Heat Treatment of Titanium-Aluminum-Compounds Made by Co-Extrusion of Asymmetric Compound Profiles

Influence of Ageing Heat Treatment on Microstructure and Mechanical Properties of a Secondary Rheocast AlSi9Cu3(Fe) Alloy

Influence of Quench Rate on the Artificial Ageing Response of an Al-8Si-0.4Mg Cast Alloy

Optimization of the Solution Heat Treatment of Rheo-High Pressure Die Cast Al-Cu-Mg-Ag 2139 Alloy.

Phase Transformation Cycle β→ α' + α + α"→ β in Ti6Al4V Alloy

Static Recrystallization Characteristic of Low Temperature Rolled AZ31 Magnesium Alloy during Annealing

The Effect of Natural Pre-Ageing on the Mechanical Properties of Rheo-High Pressure Die Cast Aluminium Alloy 2139

Age-Hardening Response of Mg-Al-Sn Alloys

Chapter 5: Mechanical Properties

Bending Collapse Behaviour of Polyurethane Foam-Filled Rectangular Magnesium Alloy AZ31B Tubes

Diamond Insert Wear when Turning Rapidly Solidified Aluminium RSA 443 of High-Silicon Content

Dry Sliding Wear Behavior of EB Surface-Alloyed and Dispersed AZ91 Magnesium Alloy under Mild Wear Conditions

Effect of Zn and Zr Concentration and Extrusion Conditions on the Mechanical Properties of Lean ZK Alloys

Fatigue Behaviour of Titanium Transition Structures for Advanced Carbon Fibre Reinforced Plastics (CFRP)-Aluminium Joints

MagForge - Mechanical Behaviour of Forged AZ31B Extruded Magnesium in Monotonic Compression

Mechanical Properties of Fibre Laser Welded AZ31B Sheets and their Dependence on the Spot-Size

Residual Stress in SLM Ti6Al4V Alloy Specimens

Twinning Assisted Crack Propagation of Magnesium-Rare Earth Casting and Wrought Alloys under Bending

Chapter 6: Coating and Surface Modification

Development of Biodegradable Coating for Controlled Dissolution of a Magnesium Alloy as an Implant

Pre-Treatment and Organic Coating of Al Free Mg Alloy for Controlling Degradation Rates

PVD Hard Coatings for High Loaded Al Alloys - Potentials and Limitations

Surface Microstructure Modification by Wire-Brushing and Annealing and its Effect on Tensile Ductility and Bendability of Mg Sheet

Tribocorrosion Response of Laser Clad TiNiZrO2 Composite Coatings on Ti6Al4V.

Bio-Mechanical Compatibility Assessment of Titanium-Nickel Alloy Fabricated Using Cold Spray Process

Chapter 7: Processing, Joining and Forming

A Novel Process for Fabricating Aluminium Alloy Porous Structure for Possible Application in Antimicrobial Filtration

Development of High Welding Speed in Friction Stir Welded 5182-H111, and the Resulting Influence on down Force

Evolution of High Precision Manufacturing of Contact Lenses

Fine Metallic Particle Emission when Milling Aluminium Alloys and Aluminium Metal Matrix Composites

Laser Weldability of Different Al-Zn Alloys and its Improvement

On the Development of Mg Sheets with Improved Formability by Applying Additional Shear Strain during Processing

Role of Surface Reactivity in Processing and Performance of Magnesium Alloys

Softening Behavior of Ti6Al4V Alloy during Hot Deformation

Chapter 8: Characterisation

Investigation of Primary Fe-Bearing Compounds in Secondary Aluminium Alloys by Differential Scanning Calorimetry

A Comparative Study on the Sintering and Casting of a Blended Elemental Ti-6Al-4V Alloy

Characterisation of Oxide Coatings Produced on Aluminium by PEO at Different Frequencies of Pulsed Current

3D X-Ray Inspection of a Radio Controlled Airplane Engine

Chapter 9: Simulation and Modeling

Determining a Flow Stress Model for High Temperature Deformation of Ti-6Al-4V

Evaluating the Johanson Theory for Titanium Powder

Molecular Dynamics Simulation of Ti and Ni Particles on Ti Substrate in the Cold Gas Dynamic Spray (CGDS) Process

On the Solute Diffusion Length in the Interdependence Model: Dendritic versus Non-Dendritic Interface

Simulation of Natural Aging in Al-Mg-Si Alloys

Optical Monitoring and Numerical Simulation of Temperature Distribution at Selective Laser Melting of Ti6Al4V Alloy

Chapter 10: Applications.

Automotive Light-Weighting Using Aluminium Metal Matrix Composites

Investigations on Fire-Resistant Magnesium Alloys for Aerospace Applications

Light Metals for the Functional Requirements of Developing World Lower Extremity Paediatric Prosthetics: A Review of Current Material &amp

Technology Trends

Keywords Index

Authors Index.

Notes:

Includes indexes.

Description based on online resource; title from PDF title page (ebrary, viewed September 26, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0033-8

OCLC:

958546381