Damage mechanics : theory, computation and practice : selected, peer reviewed papers from the 2nd International Conference on Damage Mechanics (ICDM2), July 8-11, 2015, Troyes, France / edited by K. Saanouni.

Format:

Book

Conference/Event

Contributor:

Saanouni, K., editor.

Conference Name:

International Conference on Damage Mechanics (2nd : 2015 : Troyes, France)

Series:

Applied mechanics and materials ; Volume 784.

Applied Mechanics and Materials, 1662-7482 ; Volume 784

Language:

English

Subjects (All):

Fracture mechanics--Congresses.

Fracture mechanics.

Deformations (Mechanics)--Congresses.

Deformations (Mechanics).

Physical Description:

1 online resource (532 p.)

Edition:

1st ed.

Place of Publication:

Pfaffikon, Switzerland : Trans Tech Publications Ltd, 2015.

Summary:

Selected, peer reviewed papers from the 2nd International Conference on Damage Mechanics (ICDM2), July 8-11, 2015, Troyes, France.

Contents:

Intro

Damage Mechanics: Theory, Computation and Practice

Preface, Committees and Partners

Table of Contents

Chapter 1: Theoretical Modeling in Damage Mechanics

Complex Damage Variables in Continuum Damage Mechanics

Using of Anisotropic Continuum Damage Mechanics to Describe Yield Surface Distortion

A Creep Damage Model for Rock Mass Based on Internal Variable Theory

Phenomenological Modelling of Impact Toughness Transition Behaviour

Modeling of Stress-State-Dependent Damage and Failure of Ductile Metals

Radiation Induced Damage in Ductile Materials Subjected to Time-Dependent Stresses

Damage Theory Based Fatigue Simulation of Concrete Structure

On the Use of the Generalized Eigenstrain Method in the Modeling of Coupling between Damage and Corrosion

Elastoplastic and Damage Analysis of Trusses Subjected to Cyclic Loading

Elastostatic Fields of an Embedded Circular Rigid Nano/Micro-Fiber with Interfacial Damage in Anti-Plane Couple Stress Elasticity

Multi-Phase Modelling of Concrete Affected by Sulfate Attack

Analysis of Casting Materials under Thermal Fatigue

Numerical Analysis of Laminated Veneer Lumber Panels in Fire

Cohesive Zone Damage-Healing Model for Self-Healing Materials

Microstructural Modeling of Dual Phase Steel Using a Higher-Order Gradient Plasticity-Damage Model

Comparison of Crack-Width Prediction Models for Steel-Reinforced Concrete Structures

Constitutive Model for Timber Fracture under Tensile and Shear Loads

Asymptotic Self-Similar Solution of the Creep Crack Problems in Damaged Materials under Mixed Mode Loading

Advanced Anisotropic Damage Model Fully Coupled with Anisotropic Plasticity

Continuum Model of Deformation of Piezoelectric Materials with Cracks.

Brittle Damage in Initially Anisotropic Materials: A Model Accounting for the Induced Anisotropy and Unilateral Effects

Damage Accumulation and Fracture of Weld Joints under Low-Cyclic Loading Conditions

Chapter 2: Numerical Simulations in Damage Mechanics

Recent Advances in Simulating Failure Evolution with the Material Point Method

A Micro-Cell Size Dependent Damage Law of Concrete

Damage Index Proposals Applied to Quasi-Fragile Materials Simulated Using the Lattice Discrete Element Method

Different Numerical Time Integration Schemes for Elastoplasticity Coupled to Anisotropic Damage

Failure Surface Variation Obtained with the Truss-Like Discrete Element Method

Micromechanical Damage Simulation to Obtain Effect of Coarse Grains Distribution on Mechanical Properties of Bimodal AL Using 2D XFEM

Mathematical and Numerical Modelling of Large Axisymmetric Creep Strains and Damage

Heterogeneous Lattice Model Based Simulation of Concrete under Uniaxial Loading

Impact Failure Analysis of RC Beam Using ASPH Method Based on Damage Theory

Coupled Damage-Plasticity Modelling of Ductile Failure in an Aluminium Alloy

Recent Developments in Modelling of Progressive Damage in Fibre-Reinforced Composites

Adaptive Zooming Method for the Simulation of Quasi-Brittle Materials

Comparison of Two Time-Integration Algorithms for an Anisotropic Damage Model Coupled with Plasticity

Parameter Identification of a Damage Model for the Lifetime Prediction of Adhesively Bonded Joints

Prediction of Low Cycle Fatigue Life Using Cycles Jumping Integration Scheme

Nonlocal Continuum Damage Mechanics Approach of a Discrete Axial Chain under Non-Uniform Axial Load

From Damage to Fracture, a Modelization Based on Moving Discontinuities and Layers

Variational Approach to Dynamic Brittle Fracture via Gradient Damage Models.

Fast Plastic Integration Algorithm for Damage Prediction in Forming Process Simulations

Stochastic Continuum Damage Mechanics Using Spring Lattice Models

Chapter 3: Engineering Application

Influence of Residual Stresses on the Damage of Composite Laminates under Tensile Loading

Effect of Crack Closure Parameter and Negative Triaxiality on Damage Growth in Upsetting Problem

Using Acoustic Emission Monitoring to Observe the De-Bonding Behavior of Rebar in Cyclic Pull-Out Tests

A Study on the Collapse Mechanism of High Strength Concrete Columns Apply to Fiber-Cocktail

Experimental Study on Horizontal Shear Crack Control of Prestressed Corrugated Composite Beams

A Study on the Microstructure of Welded Structural Steel Members at High Temperature

Influence of the Stress State on the Predictability of the Failure Probability in the Beremin Model

Modelling of Chip Breakage in Machining Process with Damage Mechanics Model

FE Analysis of Flexural Behavior of Externally Bonded CFRP Reinforced Timber Beams

Development of Unified Viscoplastic-Damage Model for Crashworthiness Analysis of Boron Steel Safety Components with Tailored Microstructures

Validation of Micro-Meso Electrical Relations for Laminates with Varying Anisotropy

Probabilistic Weibull Methodology for Fracture Prediction of Brittle and Ductile Materials

Comparison of Conventional Mechanical Testing with Innovative Techniques for Determination of Mechanical Properties of Nuclear Power Plant Components Materials

Strain-Based Continuum Damage Mechanics Model for Predicting FLC of AA5754 under Warm Forming Conditions

Statistical Laws of Dynamic Fragmentation of ZrO2 Ceramics

In Situ Dynamic Experiments and Modeling in Multiscale Kinetics of Damage-Failure Transition

Application of a Local Continuum Damage Model to Porous TRIP-Steel.

On the Failure Mechanisms in Reactor Pressure Vessel with Austenitic Cladding

Evaluation of Cumulative Damage of RC Members under Repeated Impact Loading

Effect of Freeze-Thaw Cycles on Mechanical Behaviors of Ceramsite Concrete under Impact Loading

Influence of Specimen Geometry on Strain Localization Phenomena in Steel Sheets

Keywords Index

Authors Index.

Notes:

Description based upon print version of record.

Includes bibliographical references at the end of each chapters and indexes.

Description based on online resource; title from PDF title page (ebrary, viewed September 26, 2016).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-0021-4

OCLC:

921031937