Advanced in fracture and damage mechanics : XVII 18th FDM 2019 / edited by Prof. S. A. Paipetis and Prof. Ferri M. H. Aliabadi.

Format:

Book

Contributor:

Paipetis, S. A., editor.

Aliabadi, M. H., editor.

Series:

Key engineering materials ; Volume 827.

Key engineering materials ; Volume 827

Language:

English

Subjects (All):

Fracture mechanics--Congresses.

Fracture mechanics.

Genre:

Conference papers and proceedings.

Physical Description:

1 online resource (524 pages).

Edition:

1st ed.

Place of Publication:

Zürich, Switzerland : Scientific.Net, [2020]

Summary:

18th FDM 2019Selected, peer reviewed papers from the 18th International Conference on Fracture and Damage Mechanics (FDM 2019), September 16-18, 2019, Rhodes, Greece.

Contents:

Intro

Advances in Fracture and Damage Mechanics XVIII

Preface

Table of Contents

Damage of Solid Phase due to Explosion Effect Using Uzawa's Algorithm

Numerical Modelling of Plasticity Induced Crack Closure with Rough Fracture Surfaces

Fibreglass Reinforced Polymer Structure Response under Different Impact Scenarios

Numerical and Experimental Investigation on the Energy Absorption Capability of a Full-Scale Composite Fuselage Section

Finite Element Modelling of Delamination Onset in Polymeric Composite Material

Ultrasonic Damage Detection of Impacted Long and Short Fibre Composite Specimens

Optimum Design of Damage Resistant Reinforced Composite Panels

Nanofillers' Effects on Fracture Energy in Composite Aerospace Structures

Experimental Investigation on the Mechanical Behaviour of Natural Fibre Sandwich Panels with Posidonia Core

Material Model Development of Sandwich Composite: Numerical-Experimental Investigation of Head Dummy Impacting at Vehicle Interior Components

Production and Characterization of Boride Coatings on Steels

Probability Ellipse Method for Damage Detection in a Composite Winglet

A Microscale Approach for Modelling Concrete Fatigue Damage-Mechanisms

Fracture Surface of a Ti-6Al-4V Specimen with EDM Notches Tested under Quasi-Static Loading in Methanol

Crack Tip Stress Field Analysis of Crack Surface Contact and Opening during In Situ Wedge Loading of Human Enamel

A Study on the Influence of Laser Parameters on Laser-Assisted Machining of AISI H-13 Steel

Turbine Blade Distortion after Heat Treatment: Preliminary Experimental Investigation and FEM Analysis

Hybrid Equilibrium Finite Element Formulation for Cohesive Crack Propagation

Mechanical Properties and Fracture Surface Analysis of Vinyl Ester Resins Reinforced with Recycled Carbon Fibres.

Optimization Methodology for Continuous Heterogeneous Structures: A Preliminary Design of an Engine Mounting Bracket

Analysis of the Heat Affected Zone and Surface Roughness during Laser Micromachining of Metals

Virtual Element Method: Micro-Mechanics Applications

A Model for Low-Cycle Fatigue in Micro-Structured Materials

Lifetime Calculation of Soil-Loaded Non-Pressure Polymer Pipes

Size Dependent Thermo-Piezoelectricity for In-Plane Cracks

Study on Generalization of Lefort's Approach to Critical Crack Length

Modelling the Strength of Cellulose Nanofiber-Filled Rigid Low-Density PU Foams

Evaluation of Residual Stresses in Laser Welded High-Pressure Vessels Steels by X-Ray Diffraction

DIC Measurement of the Full Strain Field in a Tiled Laminate to Determine Local and Global Stiffness Properties

Influence of Unsizing and Carbon Nanotube Grafting of Carbon Fibre on Fibre Matrix Interfacial Shear Strength of Carbon Fibre and Polyamide 6

Effect of Air Oxidation Treatment of CNT on Tensile Strength of CNT / Polyamide 6 Nanofibres and their Dispersion

Influence of Magnetite Dispersion on Tensile Properties

Fracture Toughness Evaluation of a Cracked Au Thin Film by Applying a Finite Element Analysis and Bulge Test

Utilization of Williams' Power Series for Estimation of Crack Behavior under Mixed-Mode Loading

A Combined Numerical and Experimental Approach to Evaluate the Hardness of AA Aluminum 6063 T6 with A Ni-P Coating

Growth Rate of Small Surface-Cracks in Age Hardening Cu-Ni-Si Alloy under Cyclic Stressing

Prediction of the Ceramic Foam Structure Failure Using a Detailed Finite Element Model

A Comparison of the Fracture Behaviour of Various Concrete Grades under Mixed Mode I/II Loading.

Numerical Studies of the Correlation between Inclusion Shape and Effective Elastic Properties of the Particle Reinforced Composites

On the Strength Weakening Effect of Stiffening Ribs in the Design of Machine Components

High-Temperature Creep Tests of Two Creep-Resistant Materials at Constant Stress and Constant Load

Hierarchical Reinforcing Fibers for Energy Harvesting Applications - A Strength Study

Recovery of Fracture Toughness on Self-Healing Epoxies Using Ternary Nanomodified Microcapsules: A Parametric Study

Computational Multi-Scale Modelling of Fiber-Reinforced Composite Materials

Water Effect on the Deformation Behavior of Nafion Membrane

An Influence of Cyclic Loading on Behaviour of a Hysteretic Interface Damage Model

Gun Bullet Collision and Penetration Behaviors for Protecting Board

A Finite Element Numerical Methodology for the Fatigue Analysis of Cylinder Liners of a High Performance Internal Combustion Engine

Evaluation of Quasi-Static and Dynamic Fracture Toughness on the Low-Alloy Reactor Pressure Vessel Steel JRQ in the Transition Region

TEM Study of Junctions between Martensite Laths and Changes in Microstructure of Low-Carbon Steel before LCF II

TEM Study of Martensite Microstructure in the Junctions of Laths in Low-Carbon Chromium Steel after LCF III

On the Crack Quasi-Static Growth

The Role of Replicated Service Atmosphere on Deformation and Fracture Behaviour of Carburised AISI Type 316H Steel

Analysis of Maximal Operation Amplitudes of Piezoelectric Vibration Energy Harvesters

Photoelastic Analysis of the Stressed State of a Flat Element with Geometrical Stress Concentrators (Cutout and Cuts)

Low Cycle Fatigue Behavior of Superalloy GH4169 in High Temperature Gas Environment.

Comprehensive Numerical Simulation on Thermally Grown Oxide and Internal Stress Evolutions in Thermal Barrier Coatings

Damage Analysis of Thermal Barrier Coatings Subjected to a High-Velocity Impingement of a Solid Sphere

Prediction of Indentation Size Formed by a High-Velocity Impingement of a Solid Sphere Based on an Expanding Cavity Model

Damage Evaluation of TBC by Rapid Thermal Cycling Test Utilizing a Laser Irradiation

Numerical Simulation of Volcanic Ash Infiltration into Thermal Barrier Coatings

Morphology Evolution and Probability Characteristic of γ' Phase in Single Crystal Superalloy during Creep Rafting

An Approach for Predicting the Initiation of Ductile Fracture in Plane Strain Rolling

Study of the Viscoelasticity of Chopped Aramid Fiber Reinforced Rubber Composite

Crack Initiation Mechanism of Hydrogen Induced Cracking in Nickel

Two-Dimensional Stress Analysis of an Infinite Plate with Anisotropic Inclusions by BFM

Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer

A Comparative Study of Impact Localisation in Composite Structures Using Neural Networks under Environmental and Operational Variations

Analysis of 3-Dimensional Creased Cracks

Rupture and Damage at Dilatant Geological Interfaces

Evaluation of Fatigue Resistance of Laser Welded High Pressure Vessels Steel P355 Considering Fracture Mechanics Approach

Thermoelastic Rolling Contact Problem of an FGM Layered Elastic Solid

Dynamic Fracture Analysis of Plates Loaded in Tension and Bending Using the Dual Boundary Element Method

Effect of Resin Layer Thickness on Mode II Delamination Growth Property of CFRTP Laminates under Static Loadings

Electromagnetic Shielding for Buildings Using Hybrid Polymer Composites: A Life Cycle Assessment Study.

On the Use of Carbon Nanotubes to Develop Durable Structural Electrodes for Self-Sensing Applications

SHM of Composite Mono-Stringer Elements Based on Guided Waves

Smart Bondline Monitoring of an Efficient Industrial Thermoplastic Aircraft Window Frame

Impact Detection on Composite Plates Based on Convolution Neural Network

Strain Energy Decomposition Influence in the Phase Field Crack Modelling at the Microstructural Level of Heterogeneous Materials

Effects of Temperature on the Fibre Matrix Interfacial Shear Strength of Carbon Nanotube Grafted Carbon Fibre Reinforced Heat Resistant Resin

Evaluation of Self Weight Deflection Property of GFRTP Laminate at Moulding Temperature and Formability Simulation of Diaphragm Forming

Experimental Free Vibration of Damaged RC Beam Models

Keyword Index

Author Index.

Notes:

"Selected, peer reviewed papers from the 18th International Conference on Fracture and Damage Mechanics (FDM 2019), September 16-18, 2019, Rhodes, Greece"--Title page.

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3586-7

OCLC:

1134853797