Engineering and innovative materials VI : 6th ICEIM 2017 : selected, peer reviewed papers from the 6th International Conference on Engineering and Innovative Materials (ICEIM 2017), September 3-5, 2017, Tokyo, Japan. / edited by Takahiro Ohashi and Muhammad Yahaya.

Format:

Book

Contributor:

Ohashi, Takahiro (Mechanical engineer), editor.

Yahaya, Muhammad, editor.

Series:

Diffusion and defect data. Defect and diffusion forum ; Pt. A, Volume 382.

Defect and Diffusion Forum, 1662-9507 ; Volume 382

Language:

English

Subjects (All):

Engineering--Congresses.

Engineering.

Materials--Technological innovations--Congresses.

Materials.

Materials science--Congresses.

Materials science.

Genre:

Conference papers and proceedings.

Physical Description:

1 online resource (385 pages) : illustrations, tables.

Edition:

1st ed.

Place of Publication:

Zurich, Switzerland : Trans Tech Publications Ltd, 2018.

Summary:

6th ICEIM 2017Selected, peer reviewed papers from the 6th International Conference on Engineering and Innovative Materials (ICEIM 2017), September 3-5, 2017, Tokyo, Japan.

Contents:

Intro

Engineering and Innovative Materials VI

Preface, Committee

Table of Contents

Chapter 1: Polymers and Composites

Preparation and Characterization of Composite Membrane Chitosan-Silica-Polyethylene Glycol

Synthesis and Characterization of Poly(Lactic Acid)-Grafted Natural Rubber by Reactive Melt-Blending Technique

Effects of Impregnation of Organoclay in the Thermo-Physico-Mechanical Properties of Recycled Composite Aluminates as Barrier Material

Preparation Polyisoprene (NR) and Polyacrylonitrile Rubber Latex Glove Films by Dipping Ceramic Hand Molds Process and their Properties

Alternative Methods for Accelerating Mechanical Stability of Concentrated Natural Rubber Latex

Plasma Surface Modification of Poly(Lactic-co-Ricinoleic Acid)Urethane: Chemical and Biological Characterizations

Barrier Properties Analysis of Polyethylene Terephthalate Films (PET) Coated with Natural Polyphenolic and Gelatin Mixture (PGM)

Morphology and Structure of Amino Fatty Acid Intercalated Montmorillonite

Chapter 2: Metals and Alloys

Physical and Mechanical Properties of the Amorphous and Nanocrystalline Alloys

Magnetic and Mechanical Properties of the Amorphous Alloys

Ultra-Fine and Nano-Crystalline Structure Induced by Sliding Friction of Carbon Steel

Mechanical Properties of Ni-Pd Thin Films Fabricated by LIGA Process

Thermodynamics on the Modification of Inclusions by Ca and Mg Treatment in GCr18Mo Bearing Steel

Thermodynamics of Aluminum Deoxidization Equilibria in GCr18Mo Bearing-Steel

Chapter 3: Material Processing and Manufacturing Engineering

Non-Isothermal Crystallization and Viscoelastic Behavior of Polypropylene/Nanoclay Composites Fabricated from Masterbatch by Using a Mini Extruder.

Comparison of Reinforcing Efficiency between Calcium Carbonate/Carbon Black and Calcium Carbonate/Silica Hybrid Filled Natural Rubber Composites

Effect of Tool Path Parameters on Part Porosity in Fused Filament Fabrication of Poly(Ethylene-co-Trimethylene Terephthalate)

Extrusion Temperature and Flow Rate Effects on Tensile Properties of Additively Processed Poly(Ethylene-co-Trimethylene Terephthalate)

Experimental Investigation of Bouncing-Back of Multidirectional CFRP Laminates during Ultrasonic Assisted Edge Trimming

Friction Stir Forming for Mechanical Interlocking of Ultra-Thin Stainless Steel Strands and Aluminum Alloys

FEM Analysis of Cold Flaring Process of SUS304 Pipe

Evaluation of Periodic Wrinkle during Sheet Press Forming Utilizing Frequency Characteristic of Ultrasonic Wave

Evaluation of Material Deformability and Pressure Distribution on a Die Surface under a Tool in Spot FSF

Multi-Objective Optimization of EDM Process Parameters by Using Passing Vehicle Search (PVS) Algorithm

Roll Casting of Al-40%Sn-1%Cu Strip

Gas Nitriding and Oxidation of Ti-6Al-4V Alloy

Prevention of Solidification of Al-40%Sn-1%Cu in Melt Pool on the Roll Casting Using Unequal Diameter Twin Roll Caster

Hydrogen Influence on Microstructure and Properties of Novel Explosive Welded Corrosion Resistant Clad Materials

The Innovation as a Source of Traditional Products' Survival: The Bobbin Lace from Peniche

Chapter 4: Engineering Mechanics of Materials

Two-Dimensional Finite Element Analysis for Investigating Stresses Developed in Cement and Bone Layers in Total Knee Replacement

Application of Coupled Ductile Fracture Criterion to Plane Strain Plates

Fatigue Failure of a Composite Wind Turbine Blade at the Trailing Edge

Four-Parameter Viscoelastic Model for the Plates of Uniformly Varying Cross-Section.

A Micro Constitutive Model for Ultra-High Molecular Weight Polyethylene Orthopaedic Implant Bearings

Eccentricity Effect in the Hole-Drilling Residual Stress Measurement

Stress Analysis of the Thin Coating of the Trapeziometacarpal Replacement

Out-of-Plane Deformation Measurement of Soft Solid Using a Stereo Camera System

Chapter 5: Building Materials

Relationship between UPV and Strength of Rubber-Concrete

Preliminary Study on Reaction of Fresh Concrete with Carbon Dioxide

Incorporating Waste Material in Road Construction for Sustainable Development

An Experiment on Bond-Slip Behavior of Epoxy Coated Rebar Made by IGBT Method

Durability of Cement Based Mortars Containing Crystalline Additives

Influence of a Crystalline Additive on the Porosity of Cement Mortars

The Bearing Capacity of the Pre-Compressed Concrete Filled Steel Tube Columns

Study of the Effect of Waste Materials on Soil Properties

Chapter 6: Bio- and Chemical Technologies and Materials

Non-Isothermal Combustion Properties of Plant Biomaterial Using TG-DSC Technique

Application of Coconut-Shell Activated Carbon as Heterogeneous Solid Catalyst for Biodiesel Synthesis

Bio-Synthesis of Eicosapentaenoic Acid (EPA) from Palm Oil Mill Effluent Using Anaerobic Process

Potential of Agro Waste-Derived Adsorbent Material for Colour Removal

Micro-Peat as a Potential Low-Cost Adsorbent Material for COD and NH3-N Removal

Development of Natural Fiber as a Filter Media in Removing Organic Pollutants from Greywater

Adsorption of Congo Red Dye on HDTMA Surfactant-Modified Zeolite A Synthesized from Fly Ash

Oxidation of Palm Shell Coal Using HNO3/H3PO4-NaNO2 System for Adsorbents

Studies on Physical and Mechanical Properties by Soda-AQ Pulping of Napier Grass

Chapter 7: Functional Materials.

Characterizing Defects Induced by Irradiation Damage in 6H-SiC

A Novel Charged Iridium Polymer for Polymer Light Emitting Diode

A New Functional Material of Immobilized Ionic Liquid on Cotton Cellulose

Characteristics on Physical-Chemical-Thermal Properties of Eggshell Membrane for Biomaterial Applications

Use of Thiols to Enhance the Hydrophobicity of Silver Nanoprisms

The Utilization of Ground Tire Rubber as Ion Exchange Materials

Chapter 8: Materials for Solar Cells

A Varied Alkyl Chains of Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs)

Synthesis and Electrical Conductivity of N-(3-(Trifluoromethyl)Benzylidine)Thiosemicarbazide towards Dyes Sensitized Solar Cell

Thiocyanate Free Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs)

Experimental Studies of Fire from CIGS Thin Film Solar Module Back

Keyword Index

Author Index.

Notes:

Includes bibliographical references at the end of each chapters and indexes.

Description based on online resource; title from PDF title page (EBC, viewed February 15, 2018).

Description based on publisher supplied metadata and other sources.

ISBN:

3-0357-3209-4

OCLC:

1020624154