Innovations in Mechanical Engineering II / edited by José Machado, Filomena Soares, Justyna Trojanowska, Erika Ottaviano, Petr Valášek, Mallikarjuna Reddy D., Eduardo André Perondi, Yevheniia Basova.

Format:

Book

Contributor:

Machado, José, editor.

Series:

Lecture Notes in Mechanical Engineering, 2195-4364

Language:

English

Subjects (All):

Engineering design.

Manufactures.

Dynamics.

Nonlinear theories.

Engineering Design.

Machines, Tools, Processes.

Applied Dynamical Systems.

Local Subjects:

Engineering Design.

Machines, Tools, Processes.

Applied Dynamical Systems.

Physical Description:

1 online resource (364 pages)

Edition:

1st ed. 2023.

Place of Publication:

Cham : Springer International Publishing : Imprint: Springer, 2023.

Summary:

This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 2nd International Conference “Innovation in Engineering”, ICIE, held in Minho, Portugal, on June 28–30, 2022, it focuses on innovation in mechanical engineering, spanning from advanced materials and composites, optimization of manufacturing and production processes, and converging issues and technologies in additive manufacturing and industry 4.0. It covers applications in the transport and automotive, and medical and education sector, among others. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials. .

Contents:

Intro

Preface

Contents

Development of Guidelines for the Design of Functionally Integrated Molds for a Novel Vacuum Assisted Resin Infusion Process

1 Introduction and State of the Art

2 Experimental Determination of the Optimum Flow Channel Geometry

2.1 Experimental Setup and Parameters

2.2 Execution and Evaluation of Experiments

2.3 Experimental Validation of Flow Channel Geometry on Complex Application Examples

3 Summary and Outlook

References

Challenges and Opportunities of Industry 4.0 at Mold Production Engineering and Management

1 Introduction

2 Mold Production Engineering and Management

3 Technological Platforms Applied to the Mold Industry

3.1 Functionality and Components Required

3.2 Network for Mold Industries

3.3 Conceptual Model

4 Conclusion

Influence of Mechanical Processing on the Durability of Parts in Additive Manufacturing Conditions

2 Literature Review

3 Research Methodology

3.1 Basic Classification of Additive Manufacturing Processes

3.2 Three-Dimensional Study of Molecular Electrostatics of Materials

4 Results

4.1 Microstructural Analysis

4.2 Mechanism of Shear of Structurally Inhomogeneous Materials Under Additive Manufacturing Conditions

4.3 Microhardness of the Surface Layer of High-Speed Steel Grade Materials P6M5

4.4 Microhardness Research for Various Types of Parts

5 Conclusions

ISO 2631 Vibration Analysis in Portuguese Alfa Pendular Trains

1.1 WBV Evaluation - ISO 2631

2 Materials and Methods

2.1 Equipment

3 Results

3.1 Measurement Results for Car 1

3.2 Measurement Results for Car 4

3.3 Measurement Results for Car 6

4 Discussion

5 Conclusion

Noise Attenuation Analysis of a Multilayer Wall

1 Introduction.

2 General Considerations

3 Determination of Noise Attenuation by Measurement

4 Determination of Noise Attenuation by Calculation

Improving Procedures for Production and Maintenance Control Towards Industry 4.0 Implementation

2 Methodology

3 Discussion and Results

Industry 4.0 Technologies for Maintenance Management - An Overview

2 Industry 4.0 Technologies

2.1 Autonomous/Collaborative Robots (A/CR)

2.2 Big Data (BD)

2.3 Cloud Computing (CC)

2.4 Internet of Things (IoT)

2.5 Horizontal and Vertical System Integration (HVI)

2.6 Simulation and Digital Twin (S and DT)

2.7 Virtual and Augmented Reality (VAR)

2.8 Additive Manufacturing (AM)

2.9 Cyber-Security (CS)

3 I4.0 Technologies Applications in Maintenance Management

4 Conclusions

Design Concept of a Non-invasive Tagging Device for Blue Sharks

2 Design Requirements and Equipment Selection

2.1 Product's Requirements Identification

2.2 Equipment Selection

2.3 Materials Selection

3 Conceptual Design

3.1 Approach for Concept Generation

3.2 Concept Creation

Aspects Regarding Subtractive and Additive CAD-CAM Processes Applied in Prosthetic Dentistry

3 CAD-CAM Approaches in Prosthetic Dentistry

Design and Performance Assessment of a Double-Screen Trommel for MSW Separation

2 Separation Process and System Modelling

2.1 Facility Description

2.2 Trommel Operating Principals

2.3 Mathematical Modelling

3 Proposed Design for the Double-Screened Trommel

4 Trommel Performance Assessment

5 Final Considerations

References.

A Comparative Study of Weld Bead Geometry of AISI 1023 with Varying Plate Width Using SAW and ASAW

2.1 Taguchi Method

2.2 Multiple Regression Analysis

3 Results and Discussion

3.1 Effect of Input Variables on Penetration

3.2 Effect of Input Variables on Weld Bead Width

3.3 Effect of Input Variables on Reinforcement Height

3.4 Effect of Input Variables on Percentage Dilution

3.5 Effect of Input Variables on HAZ

4 Comparative Study of Bead Geometry on Varying Plate Width

4.1 Effect of Plate Width on Penetration

4.2 Influence of Width of Plate on Bead Width

4.3 Effect of Plate Width on Reinforcement Height

4.4 Effect of Plate Width on % Dilution

4.5 Effect of Plate Width on HAZ

Ecofriendly Technologies of Fish Oils and Collagen Extraction from Fishery Waste - A Review

1.1 Fishery in Portugal

1.2 Fish Oil and Collagen Extracted from Fish Waste

2 Green Extraction Methods

2.1 Ultrasound Extraction

2.2 Supercritical Fluid - Assisted Extraction

2.3 Microwave-Assisted Extraction

2.4 Enzymatic - Assisted Extraction

3 Ecotoxicology

Study Concerning the Correspondence Between Optical Materials and Optical Coatings Using Matlab

1.1 How to Choose a Coating

1.2 Coatings Characteristics

2 Optical Coating Technology

3 Optical Coating Materials

4 Optical Materials and Coatings Selection Guide

Bat Algorithm for Discrete Optimization Problems: An Analysis

1.1 A Subsection Sample

2.1 Heuristics and Metaheuristics

2.2 Local Search (LS)

2.3 Simulated Annealing (SA)

2.4 Discrete Bat Algorithm (DBA)

2.5 Palmer and Campbell, Dudek and Smith (CDS).

2.6 Parameters

3 Case Study

3.1 Problem

3.2 Methodology

3.3 Parameterization

3.4 Detailed Instance Analysis

3.5 30 Instances Results

Geometrical Metrology in Food Product Measurements

2 Measurement Technique

3 Application of Coordinate Measurement Technique

4 Application of Machine Vision

Analysis and Validation of a CFD Simulation of the Wind Through a Horizontal Axis Wind Turbine as an Actuator Disc with a Porous Jump Condition

2 Numerical Model

2.1 Turbulence Modelling

2.2 Neutral Atmospheric Boundary Layer Modelling

2.3 Rotor Modelling

3 Set Up Data

3.1 Wind Turbine V42-600 kW

3.2 Computational Domain and Boundary Conditions

3.3 Solver and Discretization

4 Results and Discussion

4.1 Mesh

4.2 Velocity Variation

4.3 Pressure Field

4.4 Turbulent Kinetic Energy

4.5 Validation Procedure

Eutectic Modification of Al-Si Alloys by Using AlSr10

2 Experiment and Results

2.1 Experimental Material

2.2 Alloy Modification

2.3 Microscopic Analysis

2.4 Scanning Electron Microscopy and EDS Analysis

3 Conclusion

Flow Visualizations in a PDMS Cerebral Aneurysm Biomodel

2.1 Geometry and Manufacturing Process

2.2 In VitroPDMS Aneurysm Biomodel

2.3 Flow Visualizations Setup

What Times Should Be Used for fNIRS and EEG Protocol?

4 Results Analysis

Inclusive Platform: GUS for Social Inclusion and Competencies Development in Cerebral Palsy

1.1 Cerebral Palsy

1.2 Rehabilitation

1.3 Games.

2 GUS Platform Architecture

2.1 Design Objectives

2.2 Logical Platform Architecture

3 Platform Implementation

3.1 Interface Unit

3.2 Cloud Unit

3.3 Tangible Unit

3.4 Data Information

4 Conclusion and Future Work

Kinematic Analysis from Solar Panel Tracking System

1.1 Solar Panels

2 Kinematic Analysis

2.1 Analysis of a Joint

2.2 Kinematic Analysis from Solar Panel Tracking System of Movement by Operating Both Motors

Continuous Improvement of Logistics Processes in a Production Line of Electric Buses Chassis

3 Case Study Development

3.1 Current Status Mapping

3.2 Solutions Implemented

3D Print Technology Used in High Technical Education

2 Preparation of a Project

2.1 Partial Steps of Implementation

3 Design and Realization of 3D Printer Construction

4 Realization of a Project

4.1 Creating a 3D Model

4.2 Printing Process on a 3D Printer

5 Results and Discussion

6 Conclusions

Is Critical Thinking a Skill or a Way to Develop Skills? An Overview in Engineering Education

3 Findings and Discussion

3.1 Search 1

3.2 Search 2

3.3 Search 3

4 Final Remarks

Solving Manufacturing Orders Scheduling Problem Using Annealing Simulation

2 Research Methodology

2.1 Case Study

3 Optimization Methods

3.1 Greedy Algorithm

3.2 Neighborhood's Alteration and Heuristics

3.3 Tabu Search Algorithm

3.4 Simulated Annealing

4 Algorithms' Calculation Results

5 Comparison of Methods

6 Conclusion

Dynamic Sectorization - Conceptualization and Application

2 Literature Review.

3 Problem Definition and Criteria.

Notes:

Includes index.

Other Format:

Print version: Machado, José Innovations in Mechanical Engineering II

ISBN:

9783031093821

3031093828