Advances on Mechanics, Design Engineering and Manufacturing IV : Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2022, June 1-3, 2022, Ischia, Italy / edited by Salvatore Gerbino, Antonio Lanzotti, Massimo Martorelli, Ramón Mirálbes Buil, Caterina Rizzi, Lionel Roucoules.

Format:

Book

Contributor:

Gerbino, Salvatore, editor.

Series:

Lecture Notes in Mechanical Engineering, 2195-4364

Language:

English

Subjects (All):

Engineering design.

Industrial engineering.

Production engineering.

Computer-aided engineering.

Engineering Design.

Industrial and Production Engineering.

Computer-Aided Engineering (CAD, CAE) and Design.

Local Subjects:

Engineering Design.

Industrial and Production Engineering.

Computer-Aided Engineering (CAD, CAE) and Design.

Physical Description:

1 online resource (1646 pages)

Edition:

1st ed. 2023.

Place of Publication:

Cham : Springer International Publishing : Imprint: Springer, 2023.

Summary:

This book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022), held on June 1–3, 2022, in Ischia, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and collaborative and soft robotics. The book is organized into five main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations. .

Contents:

Intro

Preface and Acknowledgements

Organization

Conference Chairs

Conference Advisory Chairmen

Scientific Committee Coordinator

Organizing Committee

Scientific Committee

Track General Chair

Track Chairs

Design Methods and Tools

Geometric Modelling and Analysis

Advanced Manufacturing and Control

X-Reality for Interactive Design

Education and Representation Techniques

ADM

Ingegraf

S.Mart

Contents

A Computer-Aided Tool for the Energy Optimization of Industrial Robots in Manufacturing Applications

1 Introduction

2 Dynamic Scaling for Trajectory Planning

3 Graphic User Interface

4 Conclusions

References

Experimentation and Characterization of Mycelium-Based Biocomposites for Ephemeral Product Applications

2 Materials and Methods

2.1 Regulations, Tests and Specimens

2.2 Culture and Growth of the Specimens

2.3 Description of the Tests

3 Results

4 Discussion

5 Conclusions

Life Cycle Assessment of a Mobile Tiny House Made with Sustainable Materials and Design Implications

2 Context of the Work

3 Methodology, Goal and Scope of the Study

4 Data Collection and Life Cycle Inventory

4.1 Hemp Cultivation-Stage A1a

4.2 Hemp Shives Production-Stage A1b

4.3 Hemp Blocks Production-Stage A3

4.4 Construction of the Tiny Prototype-Stage A5

5 Results and Discussion

5.1 Life Cycle Impact Assessment

5.2 CML-IA Baseline Results for the Mobile Tiny House Prototype

6 Conclusions

Industrial Scraps Valorization: Designing Products to Make Detached Value Chains Circular

2 Industrial Symbiosis Design Approach

3 Case Study: Include Scraps in Components Manufacturing

3.1 Scraps and Components Characterization.

3.2 Re-design and Innovative Applications

5 Conclusion

Circular Strategies to Improve Ephemeral Products Sustainability Through Co-creation and Its Metrics

2.1 Objectives Definition

2.2 Ephemeral Products and Circular Economy

2.3 Metrics and Indexes in Circular Economy

3 Co-creation Workshop

3.1 Co-creation Workshop. Preparation and Description

3.2 Case Study: Surgical Face Masks

4 Results and Discussion

4.1 Results of the Co-creation Process

4.2 Metric Test

A Step Forward Life Cycle Assessment to Optimize Products and Increase Company Eco-design Competencies

2 Approach

3 Case Study

Workstation Design Centered to Workers' Safe Use

1.1 Context and Aim of the Paper

1.2 Our Approach and Hypothesis

2 Design Methodology

2.1 System Engineering Approach

2.2 Workstation Layout Design for Workers' Safety Use

3 Ergonomic Analysis

4 Conclusion, Future Works

Design and Manufacture of a Sustainable Recycled Plastic Shredder

1.1 Object

1.2 State of Art and Justification

2 Methodology

3 Background

3.1 Market Study

3.2 Study of the Basic Model

3.3 Innovation and New Design Requirements

4 Solutions and Prototyping Process

5 Prototype Analysis

5.1 Prototype Experimental Analysis

7 Future Prototype Improvements

Critical Analysis on the Limitations of the Diffusion of Life Cycle Assessment

2 Literature Background

3 Methodology

3.1 Used Approach

3.2 Considered Case Studies

4.1 Identified Problems

4.2 Proposed Strategies of Intervention

5 Conclusions.

References

Implementation of a Sustainable Washing System Applied to Waste Recycling

1.1 The Microplastic Problem

2 The Washing System

2.1 Experimentation

3 Premises for a Sustainable Washing System

3.1 Conceptualization and Ideas

3.2 Construction

4 Future Work

4.1 Divulgation of the Information in Open-Source Communities

4.2 Design and Testing of a 3D Printed Microplastics Filter

Basic Design and Virtual Prototyping of a Hydrofoil Hybrid Daysailer

2 State of Art

3 Introduction to the Foil-Sailing Theory

3.1 The Lift Generated by a General Wing

3.2 The Behavior of a Wing in Water

3.3 Introduction to the Stability of a Foiling Sailboat

4 Basic Design and Virtual Prototyping of "ROMa 33" Project

4.1 Hull Concept

4.2 Hull Design

4.3 Hydrofoil Design

4.4 Positioning of the Bulkhead Containing the Hydrofoil

5 Roma 33 Performance Simulations

5.1 Main Hydrofoil CFD Analysis

5.2 Overall Appendices CFD Analysis

5.3 Hydrogen Propulsion and Hydrides

6 Conclusion

Virtual Design for Repair: The Case of a Gearmotor

2 The Method

3 Results and Discussion

3.1 Disassembly Analysis

3.2 Failure Causes

3.3 The Gearmotor Re-design

Can MaWR-Method for Symmetry Plane Detection be Generalized for Complex Panfacial Fractures?

2 Methods and Tools

2.1 MaWR-Method

2.2 Asymmetry Value Index

2.3 Starting Data

Mixed Reality-Based Support for Total Hip Arthroplasty Assessment

2 Methods

4 Conclusion

A Semiautomatic Procedure to Assist Physicians in Paediatric Airway Stenting

2 Method.

2.1 Stent Characterization Procedure

3 Case Studies

An Engineering Method to Evaluate Care Processes and Introduce Televisits

2 Scientific Background

3 Method and Tools

4 Application to a Case Study

4.1 Collection of Information

4.2 Representation of Process with IDEF0

4.3 Check of Preliminary Mapping

4.4 Discussion on the Introduction of Televisits

5 Discussions

Modeling of Cutting Operations for Robotic Surgery Using CAE Tools

3 Overview on Milling and Deburring

4 Mechanical Design of the Compliant Spindle

5 Virtual Prototype via CAE Tools

6 Results

7 Conclusions

Skeleton and Medial Axis Functions Evaluation of Voxel Discretized Geometries

2.1 Geometry Models

2.2 Scanning Imaging Algorithm

2.3 Shape Analysis: Thinning and Distance Function Algorithms

User-Centered Design for Manufacturing and Assembly: An Application in the Early Design Stages

1.1 Related Literature Review

2 Method

3.1 Step1 Modular Design

3.2 Step2 Decisional Step

4 Discussion and Conclusions

A Medical Device for Correctly Positioning Custom-Made Implants for Fractured Orbital Cavities

2 Design and Development of the Orbital Implant Positioner

2.1 Requirements and Functions

2.2 Technical Specifications

2.3 Conceptualisation

2.4 Embodiment and Detail Design

2.5 Physical Prototyping

3.1 Assessment of the Patient-Specific Implant Accuracy

3.2 Assessment of the Implant Positioner Orientation

References.

A 3D Modeling Approach to Realize and Test Customized Knee Implants

2 Method and Tools

2.1 Case Study

A Design-Based Thinking for Alarm Use and Management in the Neonatal Intensive Care Unit

1.1 Communication

1.2 Alarm Fatigue

1.3 The Nurse

2.1 Framework for Critical Alarms Design (Sanz-Segura, 2021) [2]

2.2 Data Collection

2.3 Data Analysis

2.4 Prototype the Concept

3.1 Communicative Efficiency

3.2 Smart Alarm Management

3.3 Soundscape Treatment

3.4 Technical Aspects

5 Discussion

A Design Method for Custom Functionally Graded Lattice Orthoses

2.1 Acquisition of the Geometry

2.2 3D Modelling

2.3 Manufacturing

Automatic Segmentation of Stomach of Patients Affected by Obesity

2.1 Dataset

2.2 Network Architecture

2.3 Training Configuration

2.4 Metrics and Evaluation

Automatic Outcomes in Minnesota Dexterity Test Using a System of Multiple Depth Cameras

2 Material and Methods

2.1 Instrumentation

2.2 Experimental Protocol

2.3 Data Processing

3 Results and Discussions

Optimal Design of Surface Functionally Graded Dental Implants with Improved Properties

2.1 CAD Modelling and Implant Design Criteria

2.2 Numerical Simulation

The Morphological and Geometrical Segmentation of Human Thoracic and Lumbar Vertebrae: An Automatic Computer-Based Method

1 Introduction.

2 The Proposed Computer-Based Methodology.

Notes:

Includes index.

ISBN:

3-031-15928-4

OCLC:

1347023440