Structural steel design / Abi Aghayere and Jason Vigil.

Format:

Book

Author/Creator:

Aghayere, Abi O., author.

Vigil, Jason, 1974- author.

Language:

English

Subjects (All):

Building, Iron and steel--Textbooks.

Building, Iron and steel.

Physical Description:

1 online resource (956 pages)

Edition:

Third edition.

Place of Publication:

Dulles, Virginia ; Boston, Massachusetts ; New Delhi : Mercury Learning and Information, [2020]

Summary:

This simple, practical, and concise guide to structural steel design - using the Load and Resistance Factor Design (LRFD) and the Allowable Strength Design (ASD) methods -- will equip the reader with the necessary skills for designing real-world structures. Following a holistic, project-based learning approach that bridges the gap between engineering education and professional practice, the design of each building component is presented in a way such that the reader can see how each element fits into the entire building design and construction process. Structural details and practical example exercises that realistically mirror what obtains in professional design practice are presented.

Contents:

Intro

CONTENTS

PREFACE

ACKNOWLEDGMENTS

1 Introduction to Steel Structures

1.1INTRODUCTION

1.2 THE MANUFACTURE OF STRUCTURAL STEEL

1.3 PROPERTIES OF STRUCTURAL STEEL

1.4 STRUCTURAL STEEL SHAPES AND ASTM SPECIFICATION

1.5 BASIC STRUCTURAL STEEL ELEMENTS

1.6 TYPES OF STRUCTURAL SYSTEMS IN STEEL BUILDINGS

1.7 BUILDING CODES, DESIGN SPECIFICATIONS, AND THE STEEL CONSTRUCTION MANUAL

1.8 THE STRUCTURAL STEEL DESIGN AND CONSTRUCTION PROCESS

1.9 GRAVITY AND LATERAL LOAD PATHS AND STRUCTURAL REDUNDANCY

1.10 ROOF AND FLOOR FRAMING LAYOUT

1.11 SUSTAINABILITY IN THE DESIGN AND CONSTRUCTION OF STEEL STRUCTURES

2 Design Methods, Load Combinations, and Gravity Loads and Load Paths

2.1 INTRODUCTION TO DESIGN METHODS

2.2 STRENGTH REDUCTION OR RESISTANCE FACTORS

2.3 LOAD FACTORS AND LOAD COMBINATIONS

2.4 INTRODUCTION TO STRUCTURAL DESIGN LOADS

2.5 GRAVITY LOADS IN BUILDING STRUCTURES

2.6 DEAD LOADS

2.7 LIVE LOADS

2.8 FLOOR LIVE LOADS

2.9 ROOF LIVE LOAD

2.10 SNOW LOAD

3 Lateral Loads and Lateral Force Resisting Systems

3.1 LATERAL LOADS ON BUILDINGS

3.2 LATERAL FORCE RESISTING SYSTEMS IN STEEL BUILDINGS

3.3 WIND LOADS

3.4 CALCULATION OF WIND LOADS

3.5 EFFECT OF NET FACTORED UPLIFT LOADS ON ROOF BEAMS AND JOISTS

3.6 DESIGNING FOR TORNADOES - SIMPLIFIED METHOD

3.7 CALCULATION OF SEISMIC LOADS

3.8 SEISMIC ANALYSIS OF BUILDINGS USING THE ASCE 7 LOAD STANDARD

3.9 EQUIVALENT LATERAL FORCE (ELF) METHOD

3.10 VERTICAL DISTRIBUTION OF SEISMIC BASE SHEAR, V

3.11 STORY DRIFT DUE TO SEISMIC LATERAL FORCES

3.12 STRUCTURAL DETAILING REQUIREMENTS FOR SEISMIC DESIGN

4 Tension Members

4.1 INTRODUCTION

4.2 FAILURE MODES AND ANALYSIS OF TENSION MEMBERS

4.3 DESIGN OF TENSION MEMBERS

4.4 TENSION RODS

5 Compression Members Under Concentric Axial Loads.

5.1 INTRODUCTION

5.2 EULER CRITICAL BUCKLING LOAD

5.3 COMPRESSION MEMBER STRENGTH

5.4 LOCAL BUCKLING OF COMPRESSION MEMBERS

5.5 ANALYSIS PROCEDURES FOR COMPRESSION MEMBERS

5.6 DESIGN PROCEDURES FOR COMPRESSION MEMBERS

5.7 ALIGNMENT CHARTS OR NOMOGRAPHS

5.8 TORSIONAL AND FLEXURAL-TORSIONAL BUCKLING OF COMPRESSION MEMBERS

5.9 SINGLE ANGLE MEMBERS UNDER ECCENTRIC COMPRESSION LOADS

6 Flexural Members

6.1 INTRODUCTION

6.2 CLASSIFICATION OF FLEXURAL MEMBERS

6.3 FAILURE MODES OF FLEXURAL MEMBERS AND DESIGN STRENGTH FOR COMPACT SHAPES

6.4 DESIGN STRENGTH IN BENDING FOR NONCOMPACT AND SLENDER SHAPES

6.5 DESIGN OF FLEXURAL MEMBERS FOR SHEAR

6.6 BEAM DESIGN TABLES

6.7 SERVICEABILITY REQUIREMENTS FOR BEAMS

6.8 BEAM DESIGN PROCEDURE

6.9 BIAXIAL BENDING AND TORSION

6.10 BEAM BEARING FAILURE MODES AND DESIGN STRENGTH

6.11 BEARING STIFFENERS

6.12 OPEN-WEB STEEL JOISTS

6.13 FLOOR PLATES, RECTANGULAR PLATES, AND GRATING

6.14 CANTILEVERED BEAM SYSTEMS

6.15 FLEXURAL STRENGTH OF WT-SECTIONS AND DOUBLE ANGLES

6.16 FLEXURAL STRENGTH OF SQUARE AND RECTANGULAR HSS, AND BOX-SHAPED SECTIONS

7 Composite Beams

7.1 INTRODUCTION

7.2 SHEAR STUDS

7.3 COMPOSITE BEAM STRENGTH

7.4 SHORING OF COMPOSITE BEAMS

7.5 DEFLECTION OF COMPOSITE BEAMS

7.6 COMPOSITE BEAM ANALYSIS AND DESIGN USING THE AISCM TABLES

7.7 COMPOSITE BEAM DESIGN PROCEDURE

7.8 PRACTICAL CONSIDERATIONS FOR COMPOSITE BEAM AND GIRDER CONSTRUCTION

7.9 OTHER TYPES OF COMPOSITE CONSTRUCTION

8 Members Under Combined Axial Load and Bending Moment

8.1 INTRODUCTION TO BEAM-COLUMNS

8.2 EXAMPLES OF BEAM-COLUMNS IN BRACED FRAMES

8.3 BEAM-COLUMN DESIGN

8.4 MOMENT AMPLIFICATION (P-DELTA) EFFECTS

8.5 STABILITY ANALYSIS AND CALCULATION OF THE REQUIRED STRENGTHS OF BEAM-COLUMNS

8.6 DIRECT ANALYSIS METHOD (DAM).

8.7 AMPLIFIED FIRST-ORDER ANALYSIS METHOD (AFOAM) AND AMPLIFICATION FACTORS

8.8 FIRST-ORDER ANALYSIS METHOD (FOAM)

8.9 EFFECTIVE LENGTH METHOD (ELM)

8.10 UNBALANCED MOMENTS, M, FOR COLUMNS IN BRACED FRAMES DUE TO THE ECCENTRICITY OF THE GIRDER AND BEAM REACTIONS

8.11 STUDENT PRACTICE PROBLEM AND COLUMN DESIGN TEMPLATES

8.12 ANALYSIS OF MOMENT FRAMES USING THE AMPLIFIED FIRST-ORDER METHOD

8.13 ANALYSIS AND DESIGN OF BEAM-COLUMNS FOR COMBINED AXIAL TENSION AND BENDING

8.14 DESIGN OF BEAM-COLUMNS FOR COMBINED AXIAL TENSION AND BENDING

8.15 COLUMN BASE PLATES

8.16 ANCHOR RODS

8.17 UPLIFT FORCE AT COLUMN BASE PLATES

8.18 TENSION CAPACITY OF ANCHOR RODS EMBEDDED IN CONCRETE

8.19 RESISTING LATERAL SHEAR AT COLUMN BASE PLATES

8.20 COLUMN BASE PLATES UNDER AXIAL LOAD AND MOMENT

8.21 COLUMN SCHEDULE

9 Bolted Connections

9.1 INTRODUCTION

9.2 BOLT INSTALLATION

9.3 HOLE TYPES AND SPACING REQUIREMENTS

9.4 FAILURE MODES AND STRENGTH OF BOLTS

9.5 ECCENTRICALLY LOADED BOLTS: SHEAR

9.6 ECCENTRICALLY LOADED BOLTS: BOLTS IN SHEAR AND TENSION

9.7 PRYING ACTION: BOLTS IN TENSION

9.8 FRAMED BEAM CONNECTIONS

10 Welded Connections

10.1 INTRODUCTION

10.2 TYPES OF JOINTS AND WELDS

10.3 WELD SYMBOLS

10.4 DIMENSIONAL REQUIREMENTS FOR WELDS

10.5 FILLET WELD STRENGTH

10.6 PLUG AND SLOT WELD STRENGTH

10.7 GROOVE WELD STRENGTH

10.8 ECCENTRICALLY LOADED WELDS: SHEAR ONLY

10.9 ECCENTRICALLY LOADED WELDS: SHEAR PLUS TENSION

10.10 BOLTS USED IN COMBINATION WITH WELDS

11 Moment Connections, Bracing and Truss Connections, and Miscellaneous Details

11.1 INTRODUCTION

11.2 MOMENT CONNECTIONS: INTRODUCTION

11.3 PARTIALLY RESTRAINED (PR) AND FLEXIBLE MOMENT CONNECTIONS (FMC)

11.4 FULLY RESTRAINED (FR) MOMENT CONNECTIONS

11.5 MOMENT CONNECTIONS: BEAMS AND BEAM SPLICES.

11.6 COLUMN STIFFENERS IN MOMENT CONNECTIONS

11.7 COLUMN SPLICES

11.8 DESIGN OF GUSSET PLATES IN VERTICAL BRACING AND TRUSS CONNECTIONS

11.9 COPED BEAMS

11.10 HOLES IN BEAMS

12 Floor Vibrations due to Human Activity

12.1 INTRODUCTION

12.2 VIBRATION TERMINOLOGY

12.3 NATURAL FREQUENCY OF FLOOR SYSTEMS

12.4 FLOOR SYSTEMS WITH OPEN-WEB STEEL JOISTS

12.5 EVALUATION OF FLOOR SYSTEMS FOR WALKING VIBRATIONS

12.6 ANALYSIS PROCEDURE FOR WALKING VIBRATIONS

12.7 RHYTHMIC VIBRATION CRITERIA

12.8 SENSITIVE EQUIPMENT VIBRATION CRITERIA

12.9 VIBRATION OF MONUMENTAL STEEL STAIRS

12.10 VIBRATION CONTROL MEASURES

13 Built-up Sections-­Welded Plate Girders

13.1 INTRODUCTION TO WELDED PLATE GIRDERS

13.2 DESIGN OF PLATE GIRDERS

13.3 BENDING STRENGTH OF WELDED PLATE GIRDERS WITH SLENDER WEBS

13.4 DESIGN FOR SHEAR IN PLATE GIRDERS WITHOUT DIAGONAL TENSION FIELD ACTION (AISCM SECTION G2.1)

13.5 DIAGONAL TENSION FIELD ACTION IN PLATE GIRDERS (AISCM SECTION 62.2)

13.6 CONNECTION OF WELDED PLATE GIRDER COMPONENTS

13.7 PLATE GIRDER PRELIMINARY DESIGN (LRFD)

13.8 PLATE GIRDER FINAL DESIGN (LRFD)

14 Practical Considerations in the Design of Steel Buildings

14.1 INTRODUCTION AND RULES OF THUMB FOR STRUCTURAL STEEL DESIGN

14.2 LAYOUT OF STRUCTURAL SYSTEMS IN STEEL BUILDINGS

14.3 LATERAL LOAD DISTRIBUTION IN HORIZONTAL DIAPHRAGMS

DRAG STRUTS (OR COLLECTORS) AND CHORDS

14.4 DESIGN OF ROOF AND FLOOR DIAPHRAGMS IN STEEL BUILDINGS

14.5 TRANSFER OF LATERAL LOADS IN ROOFS WITH OPEN WEB STEEL JOISTS

14.6 GIRTS AND WIND COLUMNS

14.7 RELIEF OR SHELF ANGLES FOR SUPPORTING BRICK VENEER

14.8 ACHIEVING ADEQUATE DRAINAGE IN STEEL-FRAMED ROOFS

14.9 PONDING IN STEEL-FRAMED ROOF SYSTEMS

14.10 STABILITY BRACING FOR BEAMS, COLUMNS, AND BEAM-COLUMNS.

14.11 STEEL PREPARATIONS, FINISHES, AND FIREPROOFING

14.12 CORROSION PROTECTION OF STRUCTURAL STEEL

14.13 INTRODUCTION TO STRENGTHENING AND RETROFITTING OF EXISTING STEEL STRUCTURES

14.14 ELASTIC SHORTENING OF COLUMNS IN TALL STEEL BUILDINGS

14.15 STRUCTURAL INTEGRITY REQUIREMENTS

14.16 STRUCTURAL DRAWING NOTES, AND SAMPLE ROOF/FLOOR PLANS AND DETAILS

14.17 STUDENT DESIGN PROJECTS

Appendix: Plastic Analysis and Design of Continuous Beams and Girders

Index.

Notes:

Description based on print version record.

Description based on publisher supplied metadata and other sources.

ISBN:

9781523140060

1523140062

9781683923688

1683923685

OCLC:

1537945951