Sustainable materials : selected, peer reviewed papers from the International Conference on Sustainable Materials (ICoSM 2018, 16 April, 2018, Bangkok, Thailand) / edited by Heah Cheng-Yong [and eight others].

Format:

Book

Contributor:

Cheng-Yong, Heah, editor.

Series:

Solid State Phenomena Series

Solid State Phenomena Series ; v.Volume 280

Language:

English

Subjects (All):

Materials--Congresses.

Materials.

Physical Description:

1 online resource (499 pages)

Edition:

1st ed.

Place of Publication:

Zürich, Switzerland : Trans Tech Publications Ltd., [2018]

Summary:

International Conference on Sustainable Materials (ICoSM 2018)Selected, peer reviewed papers from the International Conference on Sustainable Materials (ICoSM 2018), 16 April, 2018, Bangkok, Thailand.

Contents:

Intro

Sustainable Materials

Preface

Table of Contents

Chapter 1: Functional Materials

Thermoelectric Transport Properties of SrTiO3 Doped with Pm

Investigation of Magnetoelectric Effect in the Bi-Layer Plate Structure

The Effect of Temperature and Time on the Formation of TiO2 (B) Nanowires via Hydrothermal Method

Effect of Neutron Irradiation on Electrical Properties of Bi2Sr2CaCu2 (Bi-2212) Phase Superconductor

Effect of Annealing Temperature on Silver Doped Titanium Dioxide (Ag/TiO2) Thin Film via Sol-Gel Method

Study of Mxene: Characterization and Radiation Properties of Two-Dimensional Titanium Carbide

Thermal Conductivity of Water Based Magnetite Ferrofluids at Different Temperature for Heat Transfer Applications

Ga-Sn Co-Doped ZnO Films via Sol-Gel Route

Comparison of Structural and Electrical Behaviour of Phospho-Olivine LiNiPO4 and LiNi0.8Mn0.1Co0.1PO4 for High Voltage Rechargeable Li-Ion Batteries

Conductivity Characterizationof Iron Oxide Doped 8 mol% Yttria Stabilized Zirconia

Photocatalytic Properties and Graphene Oxide Additional Effects in TiO2

Tungsten Oxide (WO3) Films Prepared by Sol-Gel Spin-Coating Technique

Investigation on the Thickness Effect of TiO2 Photo- Anode on Dye-Sensitized Solar Cell Performance

Chapter 2: Technical Ceramics

Preparation and Characterization of Macro Porous Glass-Ceramics as Bioactive Scaffold Material

Thermal and Electrical Characterization of Zn-Cu Ferrites Thin Films

Erosive Wear Characteristics of Laser Textured Alumina-Based Coatings for Marine Applications

Sinterability of 8 mol% Yttria Stabilized Zirconia

TiC-Coated Carbon Black Particles as a Bioactive Ceramic Compound for Application of Bone Tissue Engineering

Destabilization of Natural and Commercial Bentonite Interlayers by Ultrasonication, pH Control and Salt Addition.

Synthesis of WSi2-W5Si3 Intermetallic Alloy via Self-Propagating High Temperature Synthesis

Structure and Electrical Characteristics of BaTiO3 and Ba0.99Er0.01TiO3 Ceramics

Two-Stepped Synthesis of High Performance Reduced Graphene Oxide Antenna

Microwave and Electrical Properties of Zr-Doped SrTiO3 for Dielectric Resonator Antenna Application

Chapter 3: Soldering and Solder Materials in Electronics

Spontaneous Tin (Sn) Whisker Growth from Electroplated Tin and Lead-Free Tin Alloys Coatings: A Short Review

Microstructure, Interfacial IMC and Wettability of Sn-0.7Cu-xZn Solder Alloy

Growth Kinetic of Sn-0.7Cu-0.05Ni Solder Paste Subjected to Isothermal Aging

Influence of Non-Metallic Particles Addition on Wettability, Intermetallic Compound Formation and Microhardness of Sn-0.7Cu Lead Free Solder Paste

Sn Whiskers Nucleation and Growth - Short Review

Enhancement of Microstructural and Physical Properties of Sn-0.7Cu Lead-Free Solder with the Addition of SiC Particles

The Effects of Gallium Additions on the Microstructure of Lead-Free Solder Materials: A Short Review

The Effect of Temperature on Tin Whisker Growth under Mechanical Stress

Effect of Zn Additions on Thermal and Mechanical Properties of Sn-0.7Cu-xZn Solder Alloy

Microstructure Evolution of Sn-Cu Based Solder Paste with Different Cu Concentration Subjected to Multiple Reflows

Chapter 4: Surface Treatment and Corrosion Resistance

Optimization of Anodized Aluminum Oxide for DNA Application Using Taguchi Methods

Synthesis and Characterisation of Anodized Powder Metallurgy Mg-Ca Alloy

The Effect of Current Densities in Zinc Electroplating Process on Mild Steel for Soil Water Environment Application

Effect of Temperature on Oxide Growth Behaviour of Fe-33Ni-19Cr Alloy.

Effect of Heat Treatment on the Isothermal Oxidation of Fe-33Ni-19Cr Alloy

Electrochemical Impedance Spectroscopy (EIS) Evaluation of Hydroxyapatite-Coated Magnesium in Different Corrosion Media

Chapter 5: Polymers and Polymer Composites

Effects of Dynamic Vulcanization on Properties of Polypropylene/Natural Rubber/Thermoplastic Starch Blends

Mechanical Properties and Morphology of Epoxy/Graphene Nanocomposite Using Bath Sonication and Tip Sonication

Effect of Blend Ratio on the Mechanical and Thermal Properties of Polyurethane/Silicone Rubber Conductive Material

The Influence of Sodium Bicarbonate Loading as Blowing Agent on the Properties of Epoxy Foam

Comparative Study on Microwave and Conventional Joining of Thermoplastic

A Review on Effect of Nanoreinforcement on Mechanical Properties of Polymer Nanocomposites

Radiation Induced Grafting of Acrylic Acid on to Polyaniline Nanofiber

Compressive Stress of Syntactic Foam: Effect of rNBR Particles Reinforced Epoxy Macrospheres (rNBR-EM)

P84 Co-Polyimide Based-Tubular Carbon Membrane: Effect of Heating Rates on Helium Separations

Chapter 6: Biobased Materials

Effect of Microwave Heating Variables on Nitrogen-Enriched Palm Shell Activated Carbon toward Efficient Hydrogen Sulfide Removal

Characterization and Properties of Biodegradable Thermoplastic Cassava Starch/Chitosan Films

Effect of Vacuum and Non-Vacuum Packaging on Total Phenolic Content of Encapsulated Orthosiphon stamineus Spray-Dried Powder during Storage

The Mechanical Properties of Carboxymethyl Cellulose (CMC) Filled Halloysite Nanotube (HNT) Bio-Nanocomposite Films: Effect of Sodium Dodecyl Sulfate (SDS)

Characterization of Several Microcrystalline Cellulose (MCC)-Based Agricultural Wastes via X-Ray Diffraction Method.

Optimization of Methyl Ester Production from Waste Palm Oil Using Activated Carbon Supported Calcium Oxide Catalyst

Effect of Modification Time of Kenaf Bast Fiber with Maleic Anhydride on Tensile Properties of Kenaf-Glass Hybrid Fiber Unsaturated Polyester Composites

The Novel Usage of Nitrocellulose as a Propellant of 5.56 mm Bullet

Study of Cassava Starch Filled with Different Loading of Kenaf Core Fiber

Oil and Water Absorption Behavior of TPU/Natural Fibers Composites

Chapter 7: Technologies of Materials Recycling and Wastewater Treatment

Synthesis and Characterisation of Carbon Nanomaterials (CNMs) Using Polypropylene(PP) Waste as Carbon Precursor: Effect of Reactor Temperature

The Use of Coagulation-UV Irradiation/H2O2 and Electrocoagulation Methods on Pulp and Paper Mill Wastewater Treatment

Influence of Morphology of Cathode-Ray Tube Glass as Coarse Aggregates on Compressive Strength and Water Absorption of Concrete

Mechanical Properties of Biocomposite Films Based on Poly(Lactic Acid) Reinforced with Cellulose Fibers

Characteristic and Morphology of Palm Waste Filled Thermoplastic Composites

Effects of Palm Waste Filled Thermoplastic Composites on Dynamic Mechanical Analysis

Chapter 8: Mineral Processing

Characterisation of Reduction of Iron Ore with Carbonaceous Materials

Minerals Characterization of Magnetic and Non-Magnetic Element from Black Sand Langkawi

Chapter 9: Building Materials

Simulation of the Heat-Insulating Sludge Waste Rubber Composite Brick by the Finite Element Method (FEM)

Investigate the Properties of Solid Waste Bottom Ash (SBA) and Lime Reinforced in Composite Bricks

Effect of Limestone Powder in Self Consolidating Lightweight Foam Concrete

The Effect of Different Sand Gradation with Ultra High Performance Concrete (UHPC).

Categories and Types of Raw Materials Using in Geopolymer Cement Production: An Overview

Thermophysical Properties of Metakaolin Geopolymers Based on Na2SiO3/NaOH Ratio

Keyword Index

Author Index.

Notes:

Includes index.

Description based on print version record.

ISBN:

1-5231-2285-4

3-0357-3330-9

OCLC:

1050870994