Corrosion behaviour and protection of copper and aluminium alloys in seawater / edited by D. Féron.

Format:

Book

Contributor:

Féron, D.

Series:

Publications (European Federation of Corrosion) ; no. 50.

Woodhead Publishing in materials, 1354-5116

European Federation of Corrosion Publications ; Number 50

Language:

English

Subjects (All):

Seawater corrosion--Congresses.

Seawater corrosion.

Copper alloys--Corrosion--Congresses.

Copper alloys.

Aluminum alloys--Corrosion--Congresses.

Aluminum alloys.

Physical Description:

1 online resource (219 p.)

Place of Publication:

Boca Raton, Florida ; Cambridge, England : CRC Press : Woodhead Publishing Limited, 2007.

Language Note:

English

Summary:

Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships' hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-b

Contents:

Cover; Corrosion behaviour and protection of copper and aluminium alloys in seawater; Copyright; Contents; Contributor contact details; European Federation of Corrosion (EFC) publications: Series introduction; Volumes in the EFC series; Preface; Part I Overview of copper and aluminium alloys; 1 Corrosion behaviour of non-ferrous alloys in seawater in the Polish marine industry; 1.1 Introduction; 1.2 Corrosion behaviour of copper alloys in seawater; 1.3 Corrosion behaviour of aluminium alloys in seawater; 1.4 Recommendations on the use of non-ferrous alloys in seawater

1.5 Areas of future study1.6 Acknowledgements; 1.7 References; 2 Erosion-corrosion interactions of copper and aluminium alloys; 2.1 Introduction; 2.2 Erosion-corrosion testing of marine alloys and coatings; 2.3 Results and discussion; 2.4 Conclusions; 2.5 Acknowledgements; 2.6 References; Part II Copper alloys; 3 Copper and copper-nickel alloys - an overview; 3.1 Introduction; 3.2 Copper and copper alloys; 3.3 Copper alloys in marine applications; 3.4 Copper-nickel alloys; 3.5 Conclusions; 3.6 References

4 Experience with the use of copper alloys in seawater systems on the Norwegian Continental Shelf4.1 Introduction; 4.2 Copper alloys for seawater application; 4.3 Corrosion properties in seawater; 4.4 Experience from the Norwegian Continental Shelf; 4.5 Discussion; 4.6 Conclusions; 4.7 References; 5 CuNi 90/10: How to avoid typical failures of seawater tubing systems and marine biofouling on structures; 5.1 Introduction; 5.2 Effect of alloying elements; 5.3 General corrosion mechanism and establishment of oxide layers; 5.4 Localised corrosion; 5.5 Effect of sulphides

5.6 Effect of ferrous ion containing solutions5.7 Erosion-corrosion; 5.8 Effect of chlorination; 5.9 Galvanic corrosion; 5.10 Biofouling; 5.11 Conclusions; 5.12 Acknowledgement; 5.13 References; 6 70/30 copper-nickel seawater piping systems - use of descaling agents and their effects on corrosion properties; 6.1 Introduction; 6.2 Experimental procedure; 6.3 Results and discussion; 6.4 Conclusions; 6.5 Acknowledgements; 6.6 References; Part III Aluminium bronzes; 7 Long-term and accelerated corrosion testing methods for cast nickel-aluminium bronzes in seawater; 7.1 Introduction

7.2 Experimental procedures7.3 Results and discussion; 7.4 Conclusions; 7.5 Acknowledgements; 7.6 References; 8 Galvanic corrosion of nickel-aluminium bronze coupled to titanium or Cu-15Ni alloy in brackish seawater; 8.1 Introduction; 8.2 Background; 8.3 Experimental procedures; 8.4 Results and discussion; 8.5 Conclusions; 8.6 Acknowledgements; 8.7 References; Part IV Aluminium alloys; 9 Corrosion and protection of aluminum alloys in seawater; 9.1 Introduction; 9.2 Fundamental aspects of corrosion; 9.3 Effect of flow on corrosion rate and morphology; 9.4 Cathodic protection; 9.5 Summary

9.6 References

Notes:

Description based upon print version of record.

Includes bibliographical references at the end of each chapters and index.

Description based on online resource; title from PDF title page (ebrary, viewed February 14, 2014).

ISBN:

1-84569-308-6