Innovative Pre-Treatment Techniques to Prevent Corrosion of Metallic Surfaces.

Format:

Book

Author/Creator:

Fedrizzi, L.

Contributor:

Terryn, H.

Simoes, A.

Series:

European Federation of Corrosion (EFC) Series

Language:

English

Subjects (All):

Corrosion and anti-corrosives.

Protective coatings.

Physical Description:

1 online resource (249 p.)

Place of Publication:

Burlington : Elsevier Science, 2007.

Language Note:

English

Summary:

There has long been a need for effective pre-treatment techniques to prevent corrosion of metallic surfaces. This important volume discusses key research on the development of pre-treatment techniques for a range of metals. Chapters review various coatings and preparation methods for aluminium and aluminium alloys such as silane films, sol-gel coatings and magnesium-rich primers. Further chapters discuss the pre-treatment methods for steel, copper and magnesium alloys. The book also assesses methods for monitoring the effectiveness of pre-treatments, covering dissolution-precipitation mechanis

Contents:

Cover; Innovativepre-treatmenttechniques toprevent corrosion ofmetallic surfaces; Copyright; Contents; Contributor contact details; European Federation of Corrosion (EFC)publications: Series introduction; Volumes in the EFC series; 1Silane films for the pre-treatment of aluminium: film formation mechanism and curing; 1.1 Introduction; 1.2 Experimental procedures; 1.3 Results and discussion; 1.4 Conclusions; 1.5 References; 2EIS investigation of the behaviour in 0.1 M sodium chloride solution of a double layer cerium-silane pre-treatment on Al 2024-T3; 2.1 Introduction

2.2 Experimental procedures2.3 Results and discussion; 2.4 Conclusions; 2.5 Acknowledgements; 2.6 References; 3Deposition of zirconia as an adhesion promoter on Al 1050 alloy: two preparation routes; 3.1 Introduction; 3.2 Experimental procedures; 3.3 Results and discussion; 3.4 Conclusions; 3.5 References; 4Sol-gel coatings for pitting corrosion resistance of AA 2024-T3 aluminium alloy; 4.1 Introduction; 4.2 Experimental procedures; 4.3 Results and discussion; 4.4 Conclusions; 4.5 Acknowledgements; 4.6 References

5Magnesium-rich primers for chromate-free protective systems on Al 2024 and Al 70755.1 Introduction; 5.2 Experimental procedures; 5.3 Results and discussion; 5.4 Conclusions; 5.5 Acknowledgements; 5.6 References; 6The importance of the near-surface region in the surface pre-treatment of rolled recycled aluminium; 6.1 Introduction; 6.2 Experimental procedures; 6.3 Results; 6.4 Discussion; 6.5 Conclusions; 6.6 Acknowledgements; 6.7 References; 7Corrosion studies and analytical characterisation of galvanised steel substrates pre-treated with doped silane solutions; 7.1 Introduction

7.2 Experimental procedures7.3 Results and discussion; 7.4 Conclusions; 7.5 Acknowledgements; 7.6 References; 8Electrochemical evaluation of protection methods for galvanised steel using passivation treatments without hexavalent chromium; 8.1 Introduction; 8.2 Experimental procedures; 8.3 Results; 8.4 Conclusions; 8.5 Acknowledgments; 8.6 References; 9The effect of cerium nitrate on the corrosion behaviour of electrogalvanised steel substrates, evaluated by XPS and SVET; 9.1 Introduction; 9.2 Experimental procedures; 9.3 Results and discussion; 9.4 Conclusions; 9.5 Acknowledgements

9.6 References10Inhibition of corrosion of zinc by Cr(VI) and Cr(III) treatments; 10.1 Introduction; 10.2 Experimental procedures; 10.3 Results; 10.4 Discussion; 10.5 Conclusions; 10.6 Acknowledgements; 10.7 References; 11Use of a surfactant to develop an aqueous conversion coating based upon zinc heptanoate; 11.1 Introduction; 11.2 Experimental procedures; 11.3 Experimental results; 11.4 Discussion; 11.5 Conclusions; 11.6 Acknowledgements; 11.7 References; 12Effect of silane solution concentration on the anticorrosive protection of pretreatments applied on steel; 12.1 Introduction

12.2 Experimental procedures

Notes:

Description based upon print version of record.

ISBN:

1-84569-368-X