1 option
20th Brazilian Conference on Materials Science and Engineering : selected, peer reviewed papers from the 20th Brazilian Conference on Materials Science and Engineering (CBECIMAT), November 4-8, 2012, Joinville, Santa Catarina / edited by Dachamir Hotza.
LIBRA TA401.3 .M3793 v.42 (1989), v.83 (1992)-v.150/151 (1994), v.173/174 (1995)-v.258/263 (1997), v.269/272 (1998)-v.289/292 (1998),v.294/296 (1999)-v.318/320 (1999), v.325/326 (2000)-v.419/422:pts.1/2 (2003), v.433/436 (2003)-v.628/629 (2009)
Mixed Availability
- Format:
- Book
- Conference/Event
- Conference Name:
- Brazilian Conference on Materials Science and Engineering (20th : 2012 : Joinville, Santa Catarina), issuing body.
- Series:
- Materials science forum ; 0255-5476 v. 775-776.
- Materials science forum, 0255-5476 ; volumes 775-776
- Language:
- English
- Subjects (All):
- Materials science--Congresses.
- Physical Description:
- 1 online resource (759 p.)
- Edition:
- 1st ed.
- Place of Publication:
- Durnten-Zurich : Trans Tech Publicationd Limited, [2014]
- Language Note:
- English
- Summary:
- Collection of selected, peer reviewed papers from the 20th Brazilian Conference on Materials Science and Engineering (CBECIMAT), November 4-8, 2012, Joinville, Santa Catarina. The 132 papers are grouped as follows: Chapter 1: Biomaterials; Chapter 2: Materials Characterization; Chapter 3: Modeling; Chapter 4: Cements; Chapter 5: Materials Degradetion; Chapter 6: Ecological Materials; Chapter 7: Surface Engineering; Chapter 8: Materials Science and Engineering; Chapter 9: Electrical Electronics and Optical Materials; Chapter 10: Magnetic Materials; Chapter 11: Nanostructured Materials; Chapter
- Contents:
- 20th Brazilian Conference on Materials Science and Engineering; Foreword and Committees; Table of Contents; Chapter 1: Biomaterials; Polyurethane Composite Membranes; Analysis of Bone Repair Tissue after Implantation of Biomaterials and Application of Vibratory Waves; Development of Titanium Dental Implants Using Techniques of Powder Metallurgy; Nanostructured Titanium Surface Obtained by Electrochemical Treatment; Mechanical and Morphological Behavior of Blends Obtained from Biopolymers (PLA/PLC)
- Obtention and Characterization of Collagen and Chitosan Based Cements for Bone Regerneration. Part 1: Extraction and Characterization of Collagen Development of Phosphate Glass Microspheres Containing Holmium for Selective Internal Radiotherapy; Chapter 2: Materials Characterization; Characterization and Study of the Moisture Expansion of Ceramic Blocks from Ceramic Masses Incorporated with Kaolin and Granite Wastes; Thermal Activation of Palygorskite at Different Temperatures; Physical and Microstructural Characterization of Cathode, Composite Cathode and Electrolyte Ceramics to ITSOFC
- Application of Clays in Composition of Asphaltic Masses Characterization of Asphalt Mix Formulated from Equations of Packing; Properties of High Temperature Sintered Clay Ceramic Added with Multi-Wire Sawn Granite Waste; Study of the Rheological Properties of PP/Clay Systems under Steady and Oscillatory Shear Flows; Weibull Analysis to Characterize the Diameter Dependence of Tensile Strength in Sugarcane Bagasse Fibers; Characterization of Tensile Strength Dependence with Diameter of Sponge Gourd Fibers by Weibull Statistical Analysis
- Effect of the Addition of TiO2 Nanoparticles on the Sinterability of a Glass Belonging to the LZSA Glass-Ceramic System Preparation and Characterization of A Composite Obtained through Ti (IV) and Phosphoric Acid; Characterization of Epoxy Matrix Composites Incorporated with Sugarcane Bagasse Fibers; Obtaining of Polyamide 6/Calcined Nickel Ferrite Composite from Different Temperatures; Study of Heat Treatment on Phase Transformation of Ni-44,8 wt% Ti Ribbons Obtained by Melting Spinning
- Morphological Characterization of Al-2.0wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting and Electromagnetic Stirring for Thixoforming ProcessInvestigation of Microstructural Changes after Solution Annealing Treatment in a Duplex Stainless Steel; Study of the Tempering Effect in Phase Transformations of 13Cr1Ni0.15C and 13Cr2Ni0.1C Steels; Characterization of a AISI/SAE 4340 Steel in Different Microstructural Conditions; Microstructural Characterization of CP Steel Used in Automotive Industry; Microstructural Characterization of Dual and Multiphase Steels Applied to Automotive Industry
- Heat Treatment as an Alternative to Brass Warping
- Notes:
- Description based upon print version of record.
- Includes bibliographical references and indexes.
- Description based on online resource; title from PDF title page (ebrary, viewed February 4, 2014).
- ISBN:
- 3-03826-324-9
- OCLC:
- 867656494
The Penn Libraries is committed to describing library materials using current, accurate, and responsible language. If you discover outdated or inaccurate language, please fill out this feedback form to report it and suggest alternative language.