High temperature corrosion and protection of materials 7 : selected, peer reviewed papers from 7th International Symposium on High Temperature Corrosion and Protection of Materials, Les Embiez, France, May 18-23, 2008 / edited by Pierre Steinmetz [and four others] ; under the auspices of the European Federation of Corrosion.

Format:

Book

Conference/Event

Author/Creator:

International Symposium on High Temperature Corrosion and Protection of Materials, Corporate Author.

Contributor:

Steinmetz, Pierre.

European Federation of Corrosion.

Conference Name:

International Symposium on High Temperature Corrosion and Protection of Materials (7th : 2008 : Île des Embiez, France)

International Symposium on High Temperature Corrosion and Protection of Materials.

Series:

Materials science forum ; v. 595-598.

Materials science forum, 0255-5476 ; volumes 595-598

Language:

English

Subjects (All):

Materials at high temperatures--Corrosion--Congresses.

Materials at high temperatures.

Materials at high temperatures--Protection--Congresses.

Physical Description:

1 online resource (1179 p.)

Place of Publication:

Stafa-Zuerich, Switzerland ; Enfield, N.H., USA : Trans Tech Publications, [2008]

Language Note:

English

Summary:

This special volume addresses fundamental and practical aspects of high-temperature corrosion and protection. It stresses that devoting attention to an understanding of the corrosion problems encountered by contemporary industry, and providing opportunities for extended interaction, could lead to approaches for improving the performance of materials and protective measures. The book is divided into the topics: I. Materials and Coatings for Gas Turbines, II. Power Boilers and Incinerators; H2 Syngas and Biofuel Production, III. HT Materials for Nuclear Processes, IV. HT Corrosion in the Process

Contents:

High Temperature Corrosion and Protection of Materials 7; Committees; Preface; Table of Contents; Progress in the Study of the Theory and Practice of High Temperature Protective Coatings in the 22 Years of the Les Embiez Symposia; I. Materials and Coatings for Gas Turbines; Erosion and High Temperature Oxidation Resistance of New Coatings Fabricated by a Sol-Gel Route for a TBC Application; Evolution of Oxide Scales on Aluminide Coatings under Isothermal and Cyclic Conditions; Improvement of High-Temperature Oxidation of Titanium Alloys by Dipping in a Phosphoric Acid Solution

Development of a NiW In Situ Diffusion Barrier on a Fourth Generation Nickel-Base Superalloy Effect of Material and Environmental Parameters on the Microstructure Evolution and Oxidation Behavior of a Ni-Based Superalloy Coated with a Pt-Modified Ni-Aluminide; Elaboration of Nickel Aluminide Diffusion Coatings: Application to Oxidation Resistance; Rumpling of Platinum Modified Aluminide Coatings during Thermomechanical Testing; The Kinetics of Oxidation of Ru-Bearing Nickel-Based Superalloys

Platinum Diffusion and Microstructure Change in a Single Crystal Superalloy and Nickel-Based Model Alloys at 1000°C Comparison of the Thermal Cycling Performance of Thermal Barrier Coatings under Isothermal and Heat Flux Conditions; Influence of Micro-Structure on Oxidation Behavior of a Ni-Based Superalloy at 1000°C ; Short-Time Oxidation of a NiAl(Zr) Bond Coat Thermochemically Deposited on a Nickel-Based Superalloy; Oxide Spallation in Beta-NiAl Coated Systems under Mechanical loading ; Creep Deformation / Oxidation Behavior of Re-Cr-Ni Diffusion Barrier Coated Hastelloy-X at 970°C in Air

Study of the Microstructure and Oxidation Behavior of Chromium Base Alloys Strengthened by NiAl Precipitates A Novel Duplex Re-NiW Based Diffusion Barrier on a Nickel-Base Superalloy for TBC Systems; Formation of Pt-Modified γ'-Ni3Al and Re-Based σ-Alloy Coating System and Cyclic Oxidation Behavior of Coated Superalloy ; Preliminary Results of the Isothermal Oxidation Study of Pt-Al-NiCoCrAlYTa Multi-Layered Coatings Prepared by Sparks Plasma Sintering (SPS); A Prototype Software Tool for Life Time Assessment of Thermal Barrier Coating Systems

Numerical Modelling of Diffusion Coupled with Cyclic Oxidation. Application to Alumina-Forming Coatings Used for Industrial Gas Turbine Blades Chemistry of Ash-Deposits on Gas Turbines Hot Parts: Reactivity of Nickel, Zinc and Iron Oxides in (Na, V, S) Molten Salts; Hydrogen Detection in Buried Layers of Thermal Barrier Coatings; Aluminide Coating Formation on Internal Passages of GTD-111 Superalloy by Slurry Technique; Enigmatic Moisture Effects on Al2O3 Scale and TBC Adhesion; Phase Field Modeling of Interdiffusion Microstructure in Ni-Cr-Al Diffusion Couples

Degradation of Yttria Stabilized Zirconia Thermal Barrier Coatings by Molten CMAS (CaO-MgO-Al2O3-SiO2) Deposits

Notes:

Description based upon print version of record.

Includes bibliographical references and indexes.

Description based on print version record.

ISBN:

3-03813-166-0

1-61344-718-3