Processing and properties of advanced ceramics and composites VII / edited by Morsi M. Mahmoud [and ten others].

Format:

Book

Contributor:

Mahmoud, Morsi M., editor.

Series:

Ceramic transactions ; Volume 252.

Ceramic Transactions, 1042-1122 ; Volume 252

Language:

English

Subjects (All):

Ceramic materials--Congresses.

Ceramic materials.

Composite materials--Congresses.

Composite materials.

Physical Description:

1 online resource (486 p.)

Edition:

1st ed.

Place of Publication:

Hoboken, New Jersey : Wiley, 2015.

Summary:

This volume contains 40 papers from the following 10 Materials Science and Technology (MS&T'14) symposia: * Rustum Roy Memorial Symposium: Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work * Advances in Dielectric Materials and Electronic Devices * Innovative Processing and Synthesis of Ceramics, Glasses and Composites * Advances in Ceramic Matrix Composites * Sintering and Related Powder Processing Science and Technology * Advanced Materials for Harsh Environments * Thermal Protection Materials and Systems * Advanced Solution Based Processing for Ceramic Materials * Controlled Synthesis, Processing, and Applications of Structure and Functional Nanomaterials * Surface Protection for Enhanced Materials Performance

Contents:

Intro

TITLE PAGE

COPYRIGHT

PREFACE

PROCESSING AND PERFORMANCE OF MATERIALS USING MICROWAVES, ELECTRIC AND MAGNETIC FIELDS

SINGLE-MODE MICROWAVE SINTERING OF Er:Al2O3

INTRODUCTION

EXPERIMENTAL PROCEDURE

RESULTS AND DISCUSSION

SUMMARY AND CONCLUSIONS

REFERENCES

A STUDY OF HIGH TEMPERATURE REFRACTORY INSULATION FOR USE IN CERAMIC AND MICROWAVE METAL HEATING

ABSTRACT

MATERIALS AND METHODS

SCALE-UP CONSIDERATIONS

CONCLUSIONS

DISCLAIMER

COPYRIGHT NOTICE

ADVANCING COMPOSITES IN AUTOMOTIVE BY ELECTROMAGNETIC PROCESSING

CARBON FIBRES VERSUS ALUMINUM AND STEEL

AUTOMOTIVE PRODUCTION

NEW ELECTROMAGNETIC TECHNOLOGIES FOR ADVANCED COMPOSITES

SYNTHESIS OF COPPER SPINELS BY MICROWAVE IRRADIATION

ACKNOWLEDGMENT

ANALYSIS AND DESIGN OF MULTI-TIP OPEN-ENDED COAXIAL PROBE FOR VERY HIGH TEMPERATURE DIELECTRIC MEASUREMENTS

MAGNETIC PROCESSING OF LEAD FREE SOLDER SYSTEMS

MAGNETIC PROCESSING

MICROWAVE ULTRA-RAPID SINTERING OF OXIDE CERAMICS

EXPERIMENTAL

ACKNOWLEDGEMENT

THERMAL AND NON-THERMAL PHENOMENA IN MICROWAVE PROCESSING

1. INTRODUCTION

3. SUMMARY

4. ACKNOWLEDGEMENT

REFERENCE

DIELECTRIC MATERIALS AND ELECTRONIC DEVICES

LOW TEMPERATURES DIELECTRIC ANOMALY IN BiFeO3-BASED MULTIFERROIC CERAMICS.

ABSTRACT

ACKNOWLEDGMENTS

QUANTIFICATION OF PRIMARY &amp

SECONDARY CONTRIBUTION ON MAGNETOELECTRIC EFFECT OF NiFe2O4 / Pb(Zr0.52Ti0.48)O3 / NiFe2O4 TRI-LAYERED COMPOSITE.

SAMPLE SPECIFICATION

METHOD OF MEASUREMENT

RESULTS &amp

ANALYSIS

DIELECTRIC AND ELECTRICAL PROPERTIES OF UNDOPED AND Fe-DOPED YTTRIUM COPPER TITANATE

MATERIALS AND METHODOLOGY

CONCLUSION

ACKNOWLEDGEMENTS

ANALYSIS OF BIREFRINGENCE BEHAVIOR IN THE DETERMINATION OF THE CHARACTERISTICS TEMPERATURES OF TRANSPARENT FERROELECTRIC RELAXOR CERAMIC SYSTEMS

RESULTS AND DISCUSSIONS

MAGNETIC SENSORS BASED ON TUNED VARISTORS OF ILMENITE-HEMATITE, IHC45, OXIDE SEMICONDUCTOR

I. INTRODUCTION

II. RELEVANT PROPERTIES OF IHC 45 SUBSTRATE MATERIAL

III. SAMPLE PROCESSING

IV. DEVICES, PROPERTIES AND APPLICATIONS

STRUCTURAL, MICROSTRUCTURAL AND DIELECTRIC PROPERTIES OF TRI-LAYERED AURIVILLIUS-TYPE STRUCTURE Bi4Ti3O12 FERROELECTRIC CERAMICS

DIELECTRIC PROPERTIES AND APPLICATIONS OF NANOCRYSTALLINE DIAMOND THIN FILMS

DIELECTRIC PROPERTIES OF DIAMOND THIN FILMS

DIAMOND THIN FILMS FOR HIGH TEMPERATURE ELECTRONICS

DIAMOND THIN FILMS FOR THERMAL MANAGEMENT OF POWER ELECTRONICS

NANODIAMOND FOR CHEMICAL AND BIOLOGICAL SENSING

NANODIAMOND FOR BIOLOGICAL IMAGING APPLICATIONS

CONCLUSIONS.

ACKNOWLEDGEMENTS

MOUNTING OF MULTI-PIN BARE CHIPS WITH BALL PINS ON A FLEXIBLE POLYIMIDE BOARD

DISCUSSION

ADVANCES IN COMPOSITES

NUMERICAL STUDIES OF INFILTRATION DYNAMICS OF LIQUID- COPPER AND TITANIUM/SOLID- CARBON SYSTEM

NUMERICAL PROCEDURE

REACTIVE MELT INFILTRATION OF BORON CONTAINING FIBER REINFORCED PREFORMS FORMING A ZRB2 MATRIX

STATE OF THE ART

MANUFACTURING AND EXPERIMENTAL PROCEDURE

RESULTS

STRUCTURAL CLAY

ANALYSIS OF MORPHOLOGIC AND THERMIC BEHAVIOR OF MINERALS FROM THE MUNICIPALITY OF CAMPOS DOS GOYTACAZES

CHARACTERIZATION OF THE CLAY USED IN MANUFACTURING STRUCTURAL CLAY BRICK

2. MATERIALS AND METHODS

3. RESULTS AND COMMENTS

4. CONCLUSIONS

5. REFERENCES

INNOVATIVE PROCESSING

DENSIFICATION OF SHS OBTAINED Ti2AlC ACTIVE PRECURSOR POWDER BY HOT PRESSING METHOD

PREPARATION

NUMERICAL STUDIES OF WETTING AND INTERFACIAL PHENOMENA IN LIQUID-COPPER ALLOY/SOLID-CARBON AND TITANIUM CARBIDE SYSTEMS

THERMODYNAMICS OF TIC FORMATIONS

REACTIVE WETTING

PROPERTIES OF POROUS SILICON CARBIDE CERAMICS PREPARED BY SOFT TEMPLATING APPROACH

EXPERIMENTAL SECTION

CHARACTERISATION

LOW-TEMPERATURE SYNTHESIS METHOD OF ALUMINUM NITRIDE POWDER

INTRODUCTION.

EXPERIMENTAL PROCEDURE

THERMAL PROTECTION MATERIALS AND SYSTEMS

STIFFNESS RESPONSE OF OXIDE SCALES ON NICKEL BASED ODS ALLOYS EXPOSED TO THERMAL CYCLIC OXIDATION

MATERIALS AND EXPERIMENTS

HYDRA, A NEW HYBRID THERMAL PROTECTION SYSTEM FOR LEO &amp

MOON MISSION RE-ENTRY VEHICLES

SCOPE OF THE RESEARCH

MATERIALS AND ADHESIVE SCREENING

CONCEPT CHARACTERIZATION AND VERIFICATION PLAN

MECHANICAL CHARACTERIZATION

EMISSIVITY MEASUREMENTS

DIMENSIONING OF HYDRA TPS

MATURATION OF AIRBUS D&amp

S THERMAL PROTECTION SYSTEMS PORTFOLIO

FLEXIBLE" TPS TECHNOLOGIES

"RIGID" TPS TECHNOLOGIES

DEVELOPMENT PROGRAMMES

PARES

PRE-X DEMONSTRATOR

IXV DEMONSTRATOR

GSTP-SPFI

SHEFEX I+II

EXPERT

ARV

FABRICATION AND CHARACTERIZATION OF C/C-SIC MATERIAL MADE WITH PITCH-BASED CARBON FIBERS

CERAMIC MATRIX COMPOSITE C/C-SIC

CARBON PITCH FIBERS

SAMPLE MANUFACTURING

MATERIAL CHARACTERIZATION

CMC MICROSTRUCTURE DISCUSSION

MATERIALS FOR HARSH ENVIRONMENTS

ELECTROCHEMICAL BEHAVIOR OF Ti(C,N)-Ni3Al CERMETS

EXTENDING THE LIFETIME OF MIXER PADDLES USED IN THE PRODUCTION OF A LOW-LEVEL RADIOACTIVE CEMENTITIOUS WASTE FORM

MIXER PADDLES MATERIAL OF CONSTRUCTION

PADDLE CONFIGURATION TESTING

REFERENCES.

ADVANCED SOLUTION AND COLLOIDAL PROCESSING FOR CERAMICS

SYNTHESIS, CHARACTERIZATION OF FexZr1-xO2 SOLID SOLUTION NANOPARTICLES AND BULK POWDERS PREPARED USING A SOL-GEL TECHNIQUE

FERRITE NANOPARTICLES: FROM SYNTHESIS TO NEW ADVANCED MATERIALS

2. THE SYNTHESIS AND PARTICLE-SIZE DISTRIBUTION OF BARIUM HEXAFERRITE NANOPARTICLES

3. INTERPARTICLE INTERACTIONS OF THE BARIUM HEXAFERRITE AND COBALT FERRITE NANOPARTICLES

4. DEVELOPMENT OF FUNCTIONAL MATERIALS FROM BARIUM HEXAFERRITE AND COBALT FERRITE NANOPARTICLES

5. CONCLUSION

6. REFERENCES

CONTROLLED SYNTHESIS, PROCESSING, AND APPLICATIONS OF STRUCTURAL AND FUNCTIONAL NANOMATERIALS

STRUCTURAL AND OPTICAL PROPERTIES OF DYSPROSIUM-DOPED SnO2 NANOCRYSTALS AND THEIR LPG-SENSING BEHAVIOUR

RESULTS AND DICUSSION

DEVELOPMENT AND CHARACTERIZATION OF A GRAPHENE NANOSHEET-POLYANILINE (GNS-PANI) NANOCOMPOSITE FOR CONDUCTIVE INK APPLICATIONS

1. INTRODUCTION:

2. EXPERIMENTAL

3. RESULTS AND DISCUSSION

5. ACKNOWLEDGEMENTS

DESIGN AND SYNTHESIS OF METALLIC NANOPARTICLE-CERAMIC SUPPORT INTERFACES FOR ENHANCING THERMAL STABILITY

EXPERIMENTAL METHODS

SINTERING AND RELATED POWDER PROCESSING

EFFECT OF ALLOYING ELEMENTS ON MECHANICAL PROPERTIES AND ELECTRICAL CONDUCTIVITY OF P/M COPPER ALLOYS DISPERSED WITH VAPOR-GROWN CARBON FIBER

THE ROLE OF LIQUID PHASE ON MICROSTRUCTURE DEVELOPMENT AND MECHANICAL PROPERTIES IN CERAMIC TILES FOR INTERIOR WALL FACING.

Notes:

Description based upon print version of record.

Includes bibliographical references at the end of each chapters and index.

Description based on online resource; title from PDF title page (ebrary, viewed January 13, 2016).

ISBN:

9781119183846

1119183847

9781119183860

1119183863

9781119183853

1119183855

OCLC:

935251979