Physical and numerical simulation of materials processing VII : selected, peer reviewed papers from the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS '13), June 16-19, 2013, Oulu, Finland / edited by L. Pentti Karjalainen, David A. Porter and Seppo A. Järvenpää.

Format:

Book

Conference/Event

Contributor:

Karjalainen, L. Pentti.

Porter, David A.

Järvenpää, Seppo A.

Conference Name:

International Conference on Physical and Numerical Simulation of Materials Processing (7th : 2013 : Oulu, Finland)

Series:

Materials science forum ; v. 762.

Materials science forum, 0255-5476 ; volume 762

Language:

English

Subjects (All):

Materials science--Simulation methods--Congresses.

Materials science.

Materials--Mathematical models--Congresses.

Materials.

Physical Description:

1 online resource (815 p.)

Edition:

1st ed.

Place of Publication:

Durnten-Zurich : Trans Tech Publications, [2013]

Language Note:

English

Summary:

Selected, peer reviewed papers from the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS 13), June 16-19, 2013, Oulu, Finland.

Contents:

Intro

Physical and Numerical Simulation of Materials Processing VII

Preface, Committees and Sponsors

Table of Contents

Plenary Lectures

Dynamic Transformation during Simulated Hot Rolling

Multiple, Simultaneous, Martensitic Transformations: Implications on Transformation Texture Intensities

Atomic Scale Investigation of Solutes and Precipitates in High Strength Steels

Numerical Simulation of Hot Rolling

Formation of an Ultrafine-Grained Austenite-Containing Microstructure from a Cold-Rolled Medium-Manganese Steel Processed Using Intercritical Annealing

The Thermomechanical Controlled Processing of High-Strength Steel Plate: A New View of Toughness Based on Modern Metallography

Physical Simulation of Materials Processing

Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels

Control of Microstructure by MaxStrain Device

Novel Physical Simulation Technique Development for Multistage Metal Plastic Deformation Processing

Physical Simulation of Hot Rolling Steel Plate and Coil Production for Pipeline Applications

Physical Simulation of Thermomechanical Processing of Multiphase Mn-Al Steels with Retained Austenite

Designing a Novel DQ&amp

P Process through Physical Simulation Studies

Achieving High Tensile Properties in a C-Mn-Si Structural Steel by Simulating Hot Rolling and Heat Treatment Schedules

Phenomena in Steel Processing

The Development of Interphase Precipitated Nanometre-Sized Carbides in the Advanced Low-Alloy Steels

Effect of Heating Process on Retained Austenite of Mn-TRIP Steel

Crystallographic Features of Low-Carbon Bainite Formed under Non-Isothermal Conditions

Modeling of Microstructure and Mechanical Properties of Hot Rolled Steels

Modelling of Strain Rate and Temperature Dependent Flow Stresses of Supercooled Austenite for AISI 4140.

Recrystallization Behavior of 0.11% Ti-Added Complex Phase Steel during Hot Compression

Characterization and Modeling of Softening Kinetics during Hot Deformation in Modern Steels

Softening Kinetics in High Al-Nb Microalloyed Steels

Study of the Effect of Thermomechanical Processing on Grain Refinement in HSLA Steels

Development of Nano-Scale Precipitation Strengthened Hot-Rolled 590MPa Grade Wheel Steel

Microstructure and Mechanical Properties of X80 Induction Heating Bends

Effect of Reheat Conditions on Microstructure Evolution and Precipitation Behavior in High Strength Linepipe Steel

Effect of Different Cooling Paths on the Microstructure and Properties of a Plain Carbon Steel

Microstructural Evolution during Tempering of 16Cr-5Ni Stainless Steel: Effects on Final Mechanical Properties

Young's Modulus Profile in Kolsterized AISI 316L Steel

Effect of Rare Earth Addition on Dynamic Recrystallization and Precipitation Behavior of a Niobium-Containing Microalloy Steel

Numerical Simulation of Materials Processing

Physical Modelling the Microstructure Formation in Advanced High-Strength Steels

Mathematical Modelling of Hot Rolling: A Practical Tool to Improve Rolling Schedules and Steel Properties

Numerical Simulation of Thermal Stress and Deformation in a Casting Using Finite Difference Method

Numerical Simulation of Casting Thermal Stress and Deformation Based on Finite Difference Method

Research and Development on CAD/CAE Integration of Casting Process System Based on IGES Neutral File

Advanced Methods in Modelling of Metallurgical Unit Operations

Effect of Interfacial Tension on the Emulsification of Slag - Considerations on the CFD Modelling of Dispersion

Three Phase CFD-Simulation of CAS-OB Ladle.

Numerical Study on the Removal of Hydrogen and Nitrogen from the Melt of Medium Carbon Steel in Vacuum Tank Degasser

Soft Reduction of a Cast Ingot on the Incomplete Crystallization Stage

Introduction of Materials Modelling into Processing Simulation

Hybrid Modeling of Flat Rolling Process during Hot Rolling

Evolution of Strain in Multipass Hybrid Equal Channel Angular Pressing Using 3D Finite Element Analysis

Simulation of Thermomechanical Control Processing of Steels through the Use of Experimental Planning and FEM

Modelling of Grain Refinement Induced by SMAT Process, Using a Complete Numerical Chaining Methodology

Steel Property and Process Models for Quality Control and Optimization

A Fast Optimization Approach for Multi-Pass Wire Drawing Processes with a Penalty Fitness Function

Numerical Simulation of Temperature Field during Vacuum Sublimation Purification of Metal Tm

Die Stress Optimization Using Finite Element and Taguchi Method

Conditions for Consistent Implementation of Flow Stress Models Incorporating Dynamic Recrystallization into Finite Element Simulation Codes

Influence of Different Interpolation Techniques on the Determination of the Critical Conditions for the Onset of Dynamic Recrystallisation

Machining Profiling of the Working Rolls as a Way to Control Cross-Section of the Rolled Steel

Numerical Investigation on Void Nucleation around Inclusions under Combined Mechanical and Thermal Cycling Conditions

Challenges in Finite Element Simulations of Chain of Manufacturing Processes

Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process

Optimization of Local Laser Heat Treatment Process Using a Simple FE-Model

The Numerical Simulation Research of Thermal Mechanical Simulation Compression Behavior with Uneven Temperature on End.

Processing and Properties of Light Metals

Effect of Constrained Conditions on the Equivalent Strain and Microstructure of 5052 Al Alloy Deformed by Groove Pressing

Hot Simulation Compression of In Situ TiBw/Ti6Al4V Composites with Novel Network Microstructure

Numerical Simulation of Bubble Migration in Liquid Titanium Melts under Hypergravity Field

Tensile Testing of Ti-6Al-4V Alloy Superplasticity

Processing and Properties of High-Mn and Stainless Steels

Physical Modelling of the Interaction between Softening and Nb (C,N) Strain-Induced Precipitation in High-Mn Steels

Precipitation Processes in High-Manganese Steels

Study on Cyclic Strain Localization and Fatigue Fracture Mechanism in High Manganese Twinning-Induced Plasticity Steels

Effects of Heat Treatment Process on Microstructure and Mechanical Properties of 31Mn2SiREB Cast Steel

Studies on Martensite Transformation in a Metastable Austenitic Cr-Mn Stainless Steel

Modelling Tensile Curves of AISI 316L at High Temperatures Starting from Strain Hardening Analysis

Processing of Advanced Materials

The Effect of Bonding Flaws on the Splitting Process in the Smart-Cut Technology

Modeling of Steels and Steel Surfaces Using Quantum Mechanical First Principles Methods

Materials for Electronics by Thermal Spraying

Al/Al2O3 Nanocomposite Produced by ECAP

Simulation Study on the Influence of H2 on the Carbon Deposition in ICVI of Thick-Walled Perform

First-Principles Study on Mn-Doped TiFeSb Half-Heusler Thermoelectric Materials

Welding of Aluminum Matrix Composites

Phase Transitions and Microstructural Processes in Shape Memory Alloys

Semi-Massive Nanocrystallised Composites: From the Process to Mechanical and Microstructural Investigations

Surface Patterning of Stainless Steel in Prevention of Fouling in Heat Transfer Equipment.

Tuning the Composition and Microstructure of Fe-Based Alloy Thick Coatings for Heavy Duty Applications

Microstructure and Strength of Si3N4 Joints Bonded with Sialon-Oxynitride Glass

The Effects of Phosphotungstic Heteropoly Acid on Degradation Behaviour of Hardened Epoxide Polymers in Near-Critical Water

Simulation of the Hot Extrusion Process of Sintered WCu40 Covered with a Steel Cup

Microstructure and Reaction Mechanism of Multi-Laminated Ti-(SiCp/Al) Composites Subjected to Annealing at 1300°C

Simulation and Modeling of Welding

On the Modelling of a Pulsed TIG Weld Process in a Nickel Superalloy

A Process Model for Electron Beam Welding with Variable Thickness

Physical and Numerical Simulation of the Heat-Affected Zone of Multi-Pass Welds

Physical Simulation of Weldability of Weldox 1300 Steel

Physical Simulation on Microstructure and Properties for Weld HAZ of X100 Pipeline Steel

The Effect of Stabilizers on the Grain Growth and Impact Toughness of 21%Cr Ferritic Stainless Steels High-Temperature Heat-Affected Zones

Thermodynamic Modeling of a Wide Thin Steel Plate Irradiated by a Moving Gaussian Laser Beam

Verification of a Thermodynamic Model of a Wide Thin Steel Plate Irradiated by a Moving Gaussian Laser Beam

Numerical Simulation of SAW Heat Source in the External Longitudinal Magnetic Field in 16Mn Steel

Physical and Numerical Simulations of the Microstructure Evolution in AA6082 during Friction Stir Processing by Means of Hot Torsion and FEM

Development of Predicted Stress and Strain during Conventional and after Mitigation of Welded Aluminium-Manganese Alloy

Effect of Sn Content on the Microstructure, Mechanical and Electrical Properties of Ti2AlC/Cu Joints Brazed with Cu-Sn-Ti Filler Alloy.

Characterizing the Decomposition of Ti2AlC during its Brazing with Cu by Using Ag-Cu Filler Alloy.

Notes:

Description based upon print version of record.

Includes bibliographical references and indexes.

Description based on online resource; title from PDF title page (ebrary, viewed October 28, 2013).

ISBN:

3-03826-109-2

OCLC:

851593702