Advances in materials technology for fossil power plants : proceedings from the seventh International Conference, October 22-25, 2013 Waikoloa, Hawaii, USA / editors, D. Gandy, J. Shingledecker ; sponsored by Electric Power Research Institute.

Format:

Book

Conference/Event

Author/Creator:

Advances in Materials Technology for Fossil Power Plants (Conference), Corporate Author.

Contributor:

Shingledecker, J., editor.

Gandy, D., editor.

Electric Power Research Institute, sponsor.

Conference Name:

Advances in Materials Technology for Fossil Power Plants (Conference) (7th : 2013 : Waikoloa, Hawaii)

Advances in Materials Technology for Fossil Power Plants (Conference)

Language:

English

Subjects (All):

Fossil fuel power plants--Materials--Congresses.

Fossil fuel power plants.

Power-plants--Materials--Congresses.

Power-plants.

Physical Description:

1 online resource (1520 p.)

Edition:

1st ed.

Distribution:

Materials Park, Ohio : ASM International, [date of distribution not identified]

Place of Publication:

Materials Park, Ohio : ASM International, 2014.

Language Note:

English

Summary:

Conference proceedings covering the latest technology developments for fossil fuel power plants, including nickel-based alloys for advanced ultrasupercritical power plants, materials for turbines, oxidation and corrosion, welding and weld performance, new alloys concepts, and creep and general topics. One hundred eighty-five participants representing 18 countries traveled from around the world to participate in the EPRI 7th International Conference on Advances in Materials Technology for Fossil Power Plants on the Big Island of Hawaii, USA. This conference built on the success of the previous 6 conferences originally started by Prof. R. (Vis) Viswanathan, EPRI (FASM) in 1995 in London (UK), and held every three years since that time in San Sebastian (Spain), Swansea, Wales (UK), Hilton Head Island (USA), Marco Island (USA), and Santa Fe (USA). This proceedings volume contains the largest number of papers ever collected for this conference. Overwhelming response to the 2013 conference (over a 20% increase in number of papers and technical talks) prompted the organizers to hold the first ever poster session. EPRI and ASM have again partnered to publish this proceedings which is organized into 9 topical areas: technology overviews, nickel-based alloys for advanced ultrasupercritical power plants, materials for turbines, alloys T23/24, Grades 91/92, oxidation and corrosion, welding and weld performance, new alloys concepts, and creep and general topics.

Contents:

""#title_page_2013""; ""EPRI_COPYRIGHT""; ""OrganizingCommittee_2013""; ""InternationalAdvisoryBoard_2013""; ""TOC_EPRI2013""; ""Preface_2013_mt""; ""indexable_proof_New_12-16""; ""001_01_078_YeTao_Paper""; ""002_02_026_Augusto_11_20_13""; ""The ENCIO-project is financed by industrial and public funds. The project receives funding from the European Community's Research Fund for Coal and Steel (RFCS) under grant agreement n RFCPCT-2011-00003. The ENCIO project started on 1 July 2011. The ...""; ""003_03_022_Masafumi Fukuda_Paper""; ""004_04_125_JohnShingledecker_Paper_UPDATE_11_10_13""

""005_05_158_India AUSC Paper""""006_06_087_HHendrix_Paper reformatted""; ""Steam Generator""; ""007_01_121_ArthurStam_Paper""; ""008_02_111_PaulWeitzel_Paper""; ""Increasing the efficiency of the Rankine regenerative-reheat steam cycle to improve the economics of electric power generation and to achieve lower cost of electricity has been a long sought after goal. Advanced ultra-supercritical (A-USC) development...""

""The operation and start up of the 700C (1292F) plant will be similar in control methods and techniques to a 600C (1112F) plant. Due to arrangement features, the steam temperature control range and the once through minimum circulation flow will be slig...""""009_03_152_XishanXie_Paper_Update""; ""010_04_106_Srivastava_UPDATE_11_11_13""; ""011_05_107_Tortorelli_Paper""; ""012_06_109_Yujin Yang Final Paper_11_20_13""; ""ABSTRACT""; ""1 INTRODUCTION""; ""2 MATERIALS AND EXPERIMENTAL PROCEDURES""; ""3 RESULTS AND DISCUSSION""; ""3.1 Thermodynamic calculations""; ""3.2 Hardness""

""3.3 MX precipitates""""3.4 Boundary precipitates""; ""3.5 Gamma prime""; ""4 CONCLUSIONS""; ""5 ACKNOWLEDGEMENTS""; ""6 REFERENCES""; ""013_01_147_Klenk_11_19_13""; ""014_02_019_PatrikSchraven""; ""015_03_007-ZDLiu_11_19_13""; ""016_04_030_FalkMueller_Paper_removes space before abstract""; ""017_05_156_NobuhikoSaito_Paper_11_19_13""; ""018_06_037_Imano_Hitachi_11_21_13""; ""019_07_017_BrianBaker_Paper_11_22_13_BABREV""; ""Table 5: Chemical Composition of INCONEL alloy 740H Filler Metal""

""The macro-etched full cross section can be viewed in Figure 11 as well as the etched microstructure of a mounted and polished cross section. No micro-fissuring was observed in the heat-affected-zone (HAZ) or in the weld metal. Side bend testing (4T,...""""/""; ""/""; ""Table 6. Room Temperature Tensile Properties for ASME Section IX Qualifications from the Full Section HWGTAW Steam Header Pipe Weldment""; ""020_08_129_JohnShingledecker_Paper_UPDATE_11_10_13""; ""022_09_041_ShengdeZhang_Japan""; ""023_10_042_Gururaja UV_UPDATE_09_27_13""; ""024_11_091_2B_Shuangqun Zhao_11_20_13""

""025_12_117__YangHuachun_Paper""

Notes:

Includes index.

Description based on online resource; title from PDF title page (ebrary, viewed August 30, 2014).

ISBN:

1-68015-940-2

1-62708-061-9

OCLC:

929147949