Characterization of minerals, metals, and materials [electronic resource] : proceedings of symposium / sponsored by the Materials Characterization Committee of the Extraction and Processing Division of TMS (The Minerals, Metals, and Materials Society) ; edited by Jiann-Yang Hwang ... [et al.].

Format:

Book

Contributor:

Hwang, Jiann-Yang.

Minerals, Metals and Materials Society. Extraction and Processing Division.

Minerals, Metals and Materials Society. Meeting 2012 : Orlando, Fla.)

Language:

English

Subjects (All):

Materials--Testing--Congresses.

Materials.

Materials--Analysis--Congresses.

Physical Description:

1 online resource (553 p.)

Edition:

1st ed.

Place of Publication:

Hoboken, N.J. : John Wiley & Sons, c2012.

Language Note:

English

Summary:

This state-of-the-art reference contains chapters on all aspects of the characterization of minerals, metals, and materials. The title presents papers from one of the largest yearly gatherings of materials scientists in the world and thoroughly discusses the characterization of minerals, metals, and materials The scope includes current industrial applications and research and developments in the following areas: Characterization of Ferrous Metals Characterization of Non-Ferrous Materials Characterization of Minerals and Ceramics Character

Contents:

Characterization of Minerals, Metals, and Materials; TABLE OF CONTENTS; Characterization of Minerals, Metals, and Materials; Preface; Editors; Characterization of Minerals, Metals, and Materials; Characterization of Ferrous Metals I; Characterization of the Microstructure of Compacted Graphite Cast Iron; EBSD Analysis of Complex Microstructures of CSP® Processed Low Carbon Micro-Alloyed Steels; Empirical Models of Cold Working Effect in Steel Tube Production; Microstructural Investigation of Carbon Steel after Hot Rolling to Optimize Complex Hot Forming of Thick Plates

Microstructural Characterization of Fe-Mn-C Ternary Alloy under Near-Rapid SolidificationEffects of Surface Modifications on SCW Corrosion Resistance; Interface Mass Transfer during the Tribofinishing Process; Characterization of Non-Ferrous Materials; Improvement of Mechanical Properties in Severely Plastically Deformed Ni-Cr Alloy; Processing and Microstructural Control of Copper Foams for Thermal Wick Material Systems; Characterization of Minerals and Ceramics; A Novel Low-Energy Route for the Extraction of Copper and Cobalt Metals/Alloys from the Zambian Sulphide Concentrates

Structural and Chemical Modification of Sulfide Mineral Surfaces by High-Power Nanosecond PulsesCharacterization of Magnetic and Non-Magnetic Iron Oxide Nanoparticles Synthesized by Different Routes; Characterization of Concentrate, Pellet and DRI Samples for Trace Elements; The Dielectric and the Temperature-rising Characteristics of Ore Fines Materials in Microwave Field; Characterization on the Roughness of the Iron Ore Particles; Synthesis and Characterization of Al, Ag, Ti, Cu, and B Substituted Hydroxylapatite; Electric Resistivity of Fine Chromite Ore

Melting and Reduction of Manganese Sinter with FluxesCeramic Pigments with Spinel Structure Obtained by Low Temperature Methods; Mechanical Characterization of Cellular Ceramic Materials; Study of Attapulgite for Human Health; Characterization Technologies; 3D Metallography of Multiphase Steels; Characterization of Open-Pored Metals Using Image Processing; Thermography Assisted Fatigue Testing; Characterization of Environmental and Construction Materials; Tile Production Using Wastes from Mining Industry of the Mining District Pachuca and Real Del Monte

Concrete with Cementitious Steel Slag Composites and Its ApplicationsCharacterization of Dust Generated in the BOF Converter; Experimental Research to Improve the Soundness of Cementitious Material Blended with Cycled Fluidized Bed Ash; Production of Apatitic Material Using Turkish Colemanite Mineral; Setting Time of Concrete Material; Laboratory Measurements Versus Field Applications; Gas Emission and Structural Changes in the Firing of Red Clay Ceramics with Addition of Sanitary Ware Mass Wastes; Characterization of Energy, Electronic and Optical Materials

Influence of La2O3 Additive Content on the Phase Stability, Sintering and Microstructure of 8 MOL% Y2O3 Stabilized Cubic Zirconia (8YSZ) Ceramic Used for Solid Oxide Fuel Cell Applications

Notes:

"Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA, March 11-15, 2012."

Includes bibliographical references and indexes.

ISBN:

1-5231-0502-X

1-283-91713-0

1-118-37129-1

1-118-37132-1

1-118-37130-5

OCLC:

817922435